Samsung Syncmaster 740t Quick Start Guide
Have a look at the manual Samsung Syncmaster 740t Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
General General Model Name SyncMaster 940Be LCD Panel Size 19 Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 k Hz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1024@75 Hz Input Signal, Terminated RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB 0.7Vp-p Positive at 75 ±10% Separate H/V sync, Composite sync, SOG, TTL level positive or negative. Maximum Pixel Clock 140 MHz Power Supply AC 100 to 240 Vac(+/- 10%) ,60/50 Hz ± 3 Hz Signal Cable 15pin to 15pin D-sub ca ble, Detachable, 1.8 m DVI-D to DVI-D connector, Detachable, 2.0 m (option) Power Consumption
Less than 38 W Dimensions (WxDxH)/ Weight (Simple Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.35 kg Dimensions (WxDxH)/ Weight (Sliding Stand) 403.2 x 200.0 x 406.4 mm / 16.0 x 7.9 x 16.0 inch (with Basic Stand) / 5.3 kg VESA Mounting Interface 75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.) Environmental considerations Operating Temperature: 50 °F ~ 104 °F (10 °C ~ 40 °C) Humidity: 10% ~ 80%, non-condensing Storage Temperature: -4 °F ~113 °F (-20 °C ~ 45 °C) Humidity: 5% ~ 95%, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. zFor example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160. Note: Design and specifications are subject to change without prior notice. PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. StateNormal OperationPower saving mode EPA/ENERGY 2000Power off (Power button) Power off (Power Switch) Power Indicator Blue Blue, Blinking Black Black Power ConsumptionLess than 38 WLess than 1 W (Off-mode)Less than 1 W (120 Vac / 220 Vac)Less than 0 W This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. As an ENERGY STAR ® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows. Table 1. Preset Timing Modes Display ModeHorizontal Frequency (kHz)Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68.681 75.062 100.00 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 -/- VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.00 +/+ VESA, 1280 x 1024 63.981 60.020 108.00 +/+ VESA, 1280 x 1024 79.976 75.025 135.00 +/+ Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America CANADA 1-800-SAMSUNG (7267864)http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864)http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (7267864)http://www.samsung.com Latin America ARGENTINE 0800-333-3733http://www.samsung.com/ar BRAZIL 0800-124-421http://www.samsung.com/br CHILE 800-726-7864 (SAMSUNG)http://www.samsung.com/cl COSTA RICA 0-800-507-7267http://www.samsung.com/latin ECUADOR 1-800-10-7267http://www.samsung.com/latin EL SALVADOR 800-6225http://www.samsung.com/latin GUATEMALA 1-800-299-0013http://www.samsung.com/latin JAMAICA 1-800-234-7267http://www.samsung.com/latin PANAMA 800-7267http://www.samsung.com/latin PUERTO RICO 1-800-682-3180http://www.samsung.com/latin REP. DOMINICA 1-800-751-2676http://www.samsung.com/latin TRINIDAD & TOBAGO 1-800-7267-864http://www.samsung.com/latin VENEZUELA 1-800-100-5303http://www.samsung.com/latin Europe BELGIUM 02 201 2418http://www.samsung.com/be
CZECH REPUBLIC 844 000 844http://www.samsung.com/cz DENMARK 38 322 887http://www.samsung.com/dk FINLAND 09 693 79 554http://www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/min)http://www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,12/Min)http://www.samsung.de HUNGARY 06 40 985 985http://www.samsung.com/hu ITALIA 199 153 153http://www.samsung.com/it LUXEMBURG 02 261 03 710http://www.samsung.lu NETHERLANDS 0900 20 200 88 (€ 0.10/Min)http://www.samsung.com/nl NORWAY 231 627 22http://www.samsung.com/no POLAND 0 801 801 881http://www.samsung.com/pl PORTUGAL 80 8 200 128http://www.samsung.com/pt SLOVAKIA 0850 123 989http://www.samsung.com/sk SPAIN 902 10 11 30http://www.samsung.com/es SWEDEN 08 585 367 87http://www.samsung.com/se U.K 0870 242 0303http://www.samsung.com/uk CIS RUSSIA 8-800-200-0400http://www.samsung.ru UKRAINE 8-800-502-0000http://www.samsung.com/ur Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858, 010- 6475 1880http://www.samsung.com.cn HONG KONG 2862 6001http://www.samsung.com/hk INDIA 3030 8282, 1600 1100 11http://www.samsung.com/in INDONESIA 0800-112-8888http://www.samsung.com/id JAPAN 0120-327-527http://www.samsung.com/jp MALAYSIA 1800-88-9999http://www.samsung.com/my PHILIPPINES 1800-10-SAMSUNG (7267864)http://www.samsung.com/ph SINGAPORE 1800-SAMSUNG (7267864)http://www.samsung.com/sg THAILAND 1800-29-3232, 02-689-3232http://www.samsung.com/th TAIWAN 0800-329-999http://www.samsung.com/tw VIETNAM 1 800 588 889http://www.samsung.com/vn Middle East & Africa SOUTH AFRICA 0860 7267864 (SAMSUNG)http://www.samsung.com/za U.A.E 800SAMSUNG (7267864)http://www.samsung.com/mea
Terms
Dot Pitch
The image on a monitor is composed of red, green and blue dots. The closer the dots, the
higher the resolution. The distance between two dots of the same color is called the Dot
Pitch. Unit: mm
Vertical Frequency
The screen must be redrawn several times per second in order to create and display an image
for the user. The frequency of this repetition per second is called Vertical Frequency or
Refresh Rate. Unit: Hz
Example : If the same light repeats itself 60 times per second, this is regarded as 60 Hz.
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally
is called Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal
Frequency. Unit: kHz
Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom in order is called the
Non-Interlace method while showing odd lines and then even lines in turn is called the
Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a
clear image. The Interlace method is the same as that used in TVs.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the computer
and the monitor to exchange information automatically. This monitor follows the international
standard VESA DDC for the Plug & Play function.
Resolution
The number of horizontal and vertical dots used to compose the screen image is called
resolution. This number shows the accuracy of the display. High resolution is good for
performing multiple tasks as more image information can be shown on the screen.
Example : If the resolution is 1280 x 1024 , this means the screen is composed of 1280
horizontal dots (horizontal resolution) and 1024 vertical lines (vertical resolution).
For Better Display
1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described
below to enjoy the best quality of picture. You can have an uneven quality of picture in the
screen if the best quality of picture is not provided in TFT-LCD.
{Resolution: 1280 x 1024
{Vertical frequency (refresh rate): 60 Hz
2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of
1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE
and WHITE color seem to be bright sometimes or some of black pixels could be seen.
This is not from bad quality and you can use it without uneasiness.
{For example, the number of TFT LCD sub pixels that is contained in this product are
3,932,160.
3. When you clean the monitor and the panel outside, please apply the recommended small
amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but
to be scrubbed out softly.
If excessive force is applied, you can have a stain on it.
4. If you are not satisfied with the quality of picture, you can get better quality of picture by executing auto adjustment function in display screen that is appeared as window termination button is pressed. If theres still noise after auto matic adjustment, use FINE/COA RSE adjustment function. 5. If you view a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to en ergy save or set a screensaver to movin g picture when you need to be away from the monitor for an extended period of time. Authority Information in this document is subject to change without notice. © 2006 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners. RoHS Verified: The RoHS directive 2002/95/EC bans using the 6 substances listed below with electric and electronic equipment. - Lead(Pb), Cadmium(Cd), Mercury(Hg), Chromium VI(Cr VI), Polybrominated Biphenyls(PBB), Polybrominated Diphenyl Ethers(PBDE) This certification will contribute to the protection of health and the environmentally sound recovery and disposal of electric and electronic waste equipment. Class B This device is a Class B digital apparatus. For Safety and EMC compliance guide, you may refer to Regulatory Guide. MÉXICO IMPORTADO POR:SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitlán, Estado de México, C.P. 54940 Tel: 01-55-5747-5100 / 01-800-726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong, Yeongtong - gu, Suwon City, Gyeonggi-do Korea
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention. WarrantyWarranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pixel image retention doesnt occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD,are subject to image retention. This is not a product defect. Please follow the suggestions below to protect your LCD from image retention Power Off, Screen Saver, or Power Save Mode Ex) zTurn the power off when using a stationary pattern. zUse a Screen saver if possible zSet the Monitor to power off with the PC Display Properties Power Scheme. - Turn the power off for 4 hours after 24 hours in use - Turn the power off for 2 hours after 12 hours in use - Screen saver in one color or a moving image is recommended. Suggestions for specific applications Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recommend that you follow set up of your display system program as below: Display Information together with Logo or Moving image cycle. Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image for 1 minute. Change the Color Information periodically (Use 2 different colors). Ex) Rotate the Color Information with 2 colors every 30 minutes. Avoid using a combination of characters and background color with large difference in luminance. Avoid using Grey colors, which can cause Image retention easily. zAvoid: Colors with big difference in luminance (Black & White, Grey) Ex) zRecommended settings: Bright colors with little difference in luminance - Change the characters color and background color every 30 minutes Ex) - Every 30 minutes, change the characters with movement.
Ex) The best way to protect your monitor from Image retention is to set your PC or S ystem to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed. To prevent this, the accumulated voltage difference must be decreased. Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II