Samsung Syncmaster 731bf Quick Start Guide

							 
  
  
  
  
  
  
  
  
  
  
  
  
  
 
 
 
Install drivers Install programs
  
  
 
 
SyncMaster 731B / 931B / 731BF / 931BF
 
						

							 Notation
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.
 
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet 
Do not touchGrounding to prevent an electric shock
 
 
 Power
When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to the active screen mode.
 
 
Do not use a damaged or loose plug.  
 
This may cause an electric shock or fire. 
 
						

							 
 
Do not pull the plug out by the wire nor touch the plug with wet hands.  
 
This may cause an electric shock or fire.
 
 
Use only a properly grounded plug and receptacle.  
 
An improper ground may cause electric shock or equipment damage. 
 
 
Insert the power plug firmly so that it does not come loose.  
 
A bad connection may cause fire. 
 
 
Do not excessively bend the plug and wire nor place heavy objects upon them, which 
could cause damage.  
 
This may cause an electric shock or fire. 
 
 
Do not connect too many extension cords or plugs to an outlet.  
 
This may cause fire.
 
 
 Installation
  Be sure to contact an authorized Service Center when installing your set in a location 
with heavy dust, high or low temperatures, high humidity, and chemical substances, 
or where it will be operated for 24 hours continuously such as an airport, train station 
or etc.  
 
Failure to do so may cause serious damage to your set.
 
 
Put your monitor in a location with low humidity and a minimum of dust.  
 
Failure to do so may cause an electric shock or fire inside the monitor. 
 
						

							 
 
Do not drop the monitor when moving it.  
 
This may cause damage to the product or human body.
 
 
Install the monitor base in a showcase or shelf so that the end of the base does not 
protrude from the showcase or shelf.  
 
Dropping the product may cause damage to the product or personal injury.
 
 
Do not place the product on an unstable or small surface area.  
 
Place the product on an even, stable surface, as the product may fall and cause 
harm to someone walking by, specifically children.
 
 
Do not place the product on the floor.  
 
Someone, specifically children could trip over it. 
 
 
Keep any flammable objects such as candles, insecticides or cigarettes away from 
the product.  
 
Otherwise, this may cause a fire. 
 
 
Keep any heating devices away from the power cable.  
 
A melted coating may lead to electric shock or fire.
 
 
Do not install the product in places with poor ventilation, for instance, a bookshelf, 
closet, etc.  
 
Any increase in internal temperature may cause fire.
 
 
Set down the monitor carefully.  
 
 
						

							The monitor could be damaged or broken.
 
 
Do not place the monitor face down.  
 
The TFT-LCD surface may be damaged. 
 
 
Installing a wall bracket must be done by a qualified professional.  
 
Installation by unqualified personnel may result in injury.  
Always use the mounting device specified in the owners manual. 
 
 
When installing the product, make sure to keep it away from the wall (more than 10 
cm/4 inch ) for ventilation purposes.  
 
Poor ventilation may cause an increase in the internal temperature of the product, 
resulting in a shortened component life and degraded performance. 
 
 
 Cleaning and Use 
  When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a 
slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly on the monitor.  
 
This may cause damage, electric shock or fire. 
 
 
Use the recommended detergent with a smooth cloth. 
 
 
If the connector between the plug and the pin is dusty or dirty, clean it properly with a 
dry cloth.  
 
A dirty connector may cause an electric shock or fire.
 
 
						

							 Make sure to unplug the power cord before cleaning the product.  
 
Otherwise, this may cause electric shock or fire. 
 
 
Unplug the power cord from the power outlet and wipe the product using a soft, dry 
cloth.  
 
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air 
freshener, lubricant or detergent. 
 
 
Contact the Service Center or Customer Center for interior cleaning once a year.  
 
Keep the products interior clean.  
Dust which has accumulated in the interior over an extended period of time may 
cause malfunction or fire. 
 
 
 Others
Do not remove cover (or back).  
 
This may cause an electric shock or fire.  
Refer servicing to qualified service personnel. 
 
 
If your monitor does not operate normally - in particular, if there are any unusual 
sounds or smells coming from it - unplug it immediately and contact an authorized 
dealer or service.  
 
This may cause an electric shock or fire. 
 
 
Keep the product away from places exposed to oil, smoke or moisture; do not install 
inside a vehicle.  
 
This may cause malfunction, an electric shock or fire.  
Especially avoid operating the monitor near water or outdoors where the monitor 
could be exposed to snow or rain. 
 
 
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug 
the power cord. Then contact the Service Center.  
 
The monitor may malfunction, causing an electric shock or fire. 
 
 
Disconnect the plug from the outlet during storms or lightening or if it is not used for a 
long period of time.  
 
 
						

							Failure to do so may cause an electric shock or fire. 
 
 
Do not try to move the monitor by pulling only the wire or the signal cable.  
 
This may cause a breakdown, electric shock or fire due to damage to the cable. 
 
 
Do not move the monitor right or left by pulling only the wire or the signal cable.  
 
This may cause a breakdown, electric shock or fire due to damage to the cable. 
 
 
Do not cover the vents on the monitor cabinet.  
 
Bad ventilation may cause a breakdown or fire.
 
 
Do not place water containers, chemical products or small metal objects on the 
monitor.  
 
This may cause malfunction, an electric shock or fire.  
If a foreign substance enters the monitor, unplug the power cord and contact the 
Service Center. 
 
 
Keep the product away from combustible chemical sprays or inflammable 
substances.  
 
This may cause an explosion or fire. 
 
Never insert anything metallic into the monitor openings.  
 
This may cause an electric shock, fire or injury. 
 
 
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable 
objects such as paper and match into the vent, headphone port or AV ports.  
 
It may cause a fire or an electric shock.  
If an alien substances or water flows into the product, turn the product off, unplug 
the power connector from the wall outlet and contact Service Center. 
 
 
If you view a fixed screen for an extended period of time, residual image or blurriness 
may appear.  
 
 
						

							Change the mode to energy save or set a screensaver to moving picture when 
you need to be away from the monitor for an extended period of time.
 
 
Adjust the resolution and frequency to the levels appropriate for the model.  
 
Inappropriate resolution may cause undesirable picture quality.  
 
17 inch (43 cm) - 1280 x 1024  
19 inch (48 cm) - 1280 x 1024
 
Watching the monitor continuously at a too close angle may result in eyesight 
damage. 
 
 
To ease eye strain, take at least a five-minute break after every hour of using the 
monitor. 
 
Do not install the product on an unstable, uneven surface or a location prone to 
vibrations.  
 
Dropping the product may cause damage to the product or personal injury.  
Using the product in a location prone to vibrations may shorten the lifetime of the 
product or may catch fire. 
 
 
When moving the monitor, turn off and unplug the power cord. Make sure that all 
cables, including the antenna cable and cables connected to other devices, are 
disconnected before moving the monitor.  
 
Failure to disconnect a cable may damage it and lead to fire or an electric shock. 
 
Place the product out of childrens reach, as they could damage it by hanging onto it.  
 
A falling product could cause physical damage even death. 
 
 
When not using the product for an extended time period, keep the product 
unplugged.  
 
Otherwise, this may cause heat emission from the accumulated dirt or degraded 
insulation, leading to electric shock or fire.
 
 
Do not place childrens favorite objects (or anything else that may be tempting) on the 
product.  
 
 
						

							 
 
Children may try to climb on the product to retrieve an object.  
The product could fall, causing physical damage or even death. 
 
 
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with 
separate collection systems)  
 
This marking shown on the product or its literature, indicates that it should not 
be disposed with other household wastes at the end of its working life. To 
prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it 
responsibly to promote the sustainable reuse of material resources.  
 
Household users should contact either the retailer where they purchased this 
product, or their local government office, for details of where and how they 
can take this item for environmentally safe recycling.  
 
Business users should contact their supplier and check the terms and 
conditions of the purchase contract. This product should not be mixed with 
other commercial wastes for disposal.  
 
 
						

							PRODUCT INFORMATION (Image Retention Free) 
 
LCD Monitors and TVs may have image retention when switching from one image to another 
especially after displaying a stationary image for a long time.  
This guide is to demonstrate correct usage of LCD products in order to protect them from Image 
retention.  
 
WarrantyWarranty does not cover any damage caused by image retention.  
Burn-in is not covered by the warranty. 
What is Image retention ? 
During normal operation of a LCD panel, pixel image retention doesnt occur. However, 
if the same image is displayed for a long time, a slight difference in electric charge 
accumulates between the two electrodes which encase the liquid crystal. This may 
cause the liquid crystal to build up in a certain areas of the display. Thus, the previous 
image is retained when switching to a new video image. All display products, including 
LCD,are subject to image retention. This is not a product defect.  
Please follow the suggestions below to protect your LCD from image retention 
Power Off, Screen Saver, or Power Save Mode 
Ex) 
zTurn the power off when using a stationary pattern. 
zUse a Screen saver if possible 
zSet the Monitor to power off with the PC Display Properties Power Scheme.  
 - Turn the power off for 4 hours after 24 hours in use 
- Turn the power off for 2 hours after 12 hours in use  
- Screen saver in one color or a moving image is recommended. 
Suggestions for specific applications 
Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems  
We recommend that you follow set up of your display system program as below: 
 
 
Display Information together with Logo or Moving image cycle. 
Ex) Cycle : Display Information for 1 hour followed by a  
Display Logo or moving image for 1 minute.  
 
Change the Color Information periodically (Use 2 different colors).
Ex) Rotate the Color Information with 2 colors every 30 minutes.  
 
Avoid using a combination of characters and background color with large 
difference in luminance. 
Avoid using Grey colors, which can cause Image retention easily.  
 
zAvoid: Colors with big difference in luminance (Black & White, Grey)  
Ex)  
 
 
zRecommended settings: Bright colors with little difference in luminance  
- Change the characters color and background color every 30 minutes  
Ex) 
 
 
- Every 30 minutes, change the characters with movement.