Samsung Syncmaster 731bf Quick Start Guide

 
  
  
  
  
  
  
  
  
  
  
  
  
  
 
 
 
Install drivers Install programs
  
  
 
 
SyncMaster 731B / 931B / 731BF / 931BF
 

 Notation
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.
 
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet 
Do not touchGrounding to prevent an electric shock
 
 
 Power
When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to the active screen mode.
 
 
Do not use a damaged or loose plug.  
 
This may cause an electric shock...

 
 
Do not pull the plug out by the wire nor touch the plug with wet hands.  
 
This may cause an electric shock or fire.
 
 
Use only a properly grounded plug and receptacle.  
 
An improper ground may cause electric shock or equipment damage. 
 
 
Insert the power plug firmly so that it does not come loose.  
 
A bad connection may cause fire. 
 
 
Do not excessively bend the plug and wire nor place heavy objects upon them, which 
could cause damage.  
 
This may cause an electric shock or fire....

 
 
Do not drop the monitor when moving it.  
 
This may cause damage to the product or human body.
 
 
Install the monitor base in a showcase or shelf so that the end of the base does not 
protrude from the showcase or shelf.  
 
Dropping the product may cause damage to the product or personal injury.
 
 
Do not place the product on an unstable or small surface area.  
 
Place the product on an even, stable surface, as the product may fall and cause 
harm to someone walking by, specifically children....

The monitor could be damaged or broken.
 
 
Do not place the monitor face down.  
 
The TFT-LCD surface may be damaged. 
 
 
Installing a wall bracket must be done by a qualified professional.  
 
Installation by unqualified personnel may result in injury.  
Always use the mounting device specified in the owners manual. 
 
 
When installing the product, make sure to keep it away from the wall (more than 10 
cm/4 inch ) for ventilation purposes.  
 
Poor ventilation may cause an increase in the internal...

 Make sure to unplug the power cord before cleaning the product.  
 
Otherwise, this may cause electric shock or fire. 
 
 
Unplug the power cord from the power outlet and wipe the product using a soft, dry 
cloth.  
 
Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air 
freshener, lubricant or detergent. 
 
 
Contact the Service Center or Customer Center for interior cleaning once a year.  
 
Keep the products interior clean.  
Dust which has accumulated in the interior...

Failure to do so may cause an electric shock or fire. 
 
 
Do not try to move the monitor by pulling only the wire or the signal cable.  
 
This may cause a breakdown, electric shock or fire due to damage to the cable. 
 
 
Do not move the monitor right or left by pulling only the wire or the signal cable.  
 
This may cause a breakdown, electric shock or fire due to damage to the cable. 
 
 
Do not cover the vents on the monitor cabinet.  
 
Bad ventilation may cause a breakdown or fire.
 
 
Do not...

Change the mode to energy save or set a screensaver to moving picture when 
you need to be away from the monitor for an extended period of time.
 
 
Adjust the resolution and frequency to the levels appropriate for the model.  
 
Inappropriate resolution may cause undesirable picture quality.  
 
17 inch (43 cm) - 1280 x 1024  
19 inch (48 cm) - 1280 x 1024
 
Watching the monitor continuously at a too close angle may result in eyesight 
damage. 
 
 
To ease eye strain, take at least a five-minute break...

 
 
Children may try to climb on the product to retrieve an object.  
The product could fall, causing physical damage or even death. 
 
 
Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with 
separate collection systems)  
 
This marking shown on the product or its literature, indicates that it should not 
be disposed with other household wastes at the end of its working life. To 
prevent possible...

PRODUCT INFORMATION (Image Retention Free) 
 
LCD Monitors and TVs may have image retention when switching from one image to another 
especially after displaying a stationary image for a long time.  
This guide is to demonstrate correct usage of LCD products in order to protect them from Image 
retention.  
 
WarrantyWarranty does not cover any damage caused by image retention.  
Burn-in is not covered by the warranty. 
What is Image retention ? 
During normal operation of a LCD panel, pixel image...