Samsung Syncmaster 720n Quick Start Guide

    
 
 
1.[ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2.[ ]This button allows you to adjust items in the menu.
3.[ ]This button allows you to adjust items in the menu.
4.[ ]Press this button to activate a highlighted menu item.
5.[
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 AUTO 
 

Menu Description
AUTO When the 
AUTO button is pressed, the auto adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
zIf auto adjustment does not work properly, press auto button again to 
adjust picture with more accuracy....

 
 Brightness 
Menu Description
BrightnessWhen OSD is not on the screen, push the button to adjust brightness. 
 
 
 
 
1. Picture BrightnessContrast
2. Color Color ToneColor ControlGamma
3. Image CoarseFineSharpnessH-PositionV-Position
4. OSD LanguageH-PositionV-PositionTransparencyDisplay Time
5. Setup Image ResetColor Reset
6. Information
 Picture   
 

Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
Direct Access Feature : When OSD is not on the screen, 
Push the button to adjust brightness.  
MENU →  →  → ▲ , ▼ → MENU 
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference. 
MENU →  → ▲ , ▼ →  → ▲ , ▼ → MENU 
 
 
 
 
 Color   
Menu Description Play/Stop
The tone of the color can be changed and one of four 
 

Color Tonemodes can be selected - Cool, Normal, Warm and 
Custom. 
MENU 
→ ▲ , 
▼ →  
→  
→ ▲ , 
▼ → MENU 
Color ControlAdjusts individual R,G,B color balance. 
MENU 
→ ▲ , 
▼ →  
→ ▲ , 
▼ →  
→ ▲ , 
▼ → MENU 
GammaGamma correction changes the luminance of the colors 
with intermediate luminance. zMode 1  zMode 2  zMode 3 
MENU 
→ ▲ , 
▼ →  
→ ▲ , 
▼ →  
→ ▲ , 
▼ → MENU
 
 
 
 
 Image   
Menu Description Play/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image...

V-PositionChanges the vertical position of the monitors entire 
display. 
MENU 
→ ▲ , 
▼ →   
→ ▲  , 
▼ →   
→ ▲  , 
▼ →  MENU 
 
 
 
 
 OSD   
Menu Description Play/Stop
Language Change the language used in the menu. You can choose 
one of the seven languages. 
Note
:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer. 
MENU  → ▲ , 
▼ →   
→  
→ ▲  , 
▼ →  MENU 
H-Position You can change the horizontal position where the OSD 
menu appears...

 
 
 
 Setup   
Menu Description Play/Stop
Image ResetImage parameters are replaced with the factory default 
values. 
MENU → ▲ , ▼ →  →  → ▲ , ▼ → MENU 
Color ResetColor parameters are replaced with the factory default 
values. 
MENU 
→ ▲ , 
▼ →  
→ ▲ , 
▼ →  
→ ▲ , 
▼ → MENU 
 
 
 
 
 Information   
 

Menu Description
InformationShows a video source, display mode on the OSD screen.  
MENU →▲ , ▼ 
 

    
 
 
 
 Check List 
Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do need assistance, please call the phone number on the 
Information section or contact your dealer.
 
 
Symptom Check List Solutions
No images on the 
screen. I cannot turn 
on the monitor.Is the power cord connected 
properly?Check the power cord connection 
and supply.
Can you see 
Check Signal Cable 
on the screen? Check the signal cable connection.
If the...

 
Please change to the recommended 
mode during this one-minute period. 
 
(The message is displayed again if 
the system is rebooted.) 
There is no image on the screen.  
Is the power indicator on the monitor 
blinking at 1 second intervals?The monitor is in PowerSaver mode. 
 
press any key on the keyboard to 
activate the monitor and restore the 
image on the screen.
The screen shows 
strange colors or just 
black and white.Is the screen displaying only one 
color as if looking at the screen 
through...