Samsung Syncmaster 720n Quick Start Guide

 
 
 
 Front  
 
 
  1. MENU button [ ] 
 
Opens the OSD menu. Also use to exit the OSD menu or return to 
the previous menu.  
2. MagicBright button   [] 
 
 
 
 
MagicBright is a new feature providing optimum viewing 
environment depending on the contents of the image you are 
watching. Currently four different modes are available: Custom, 
Text, Internet, and Entertain. Each mode has its own pre-
configured brightness value. You can easily select one of four 
settings by simply pressing MagicBright...

 
 
    once as the monitor saves your adjustments. 
See PowerSaver described in the manual for further information regarding power saving 
functions. For energy conservation, turn your monitor off when it is not needed, or when 
leaving it unattended for long periods.
 
 
 
 
  
  
  
    
 
Rear 
(The configuration at the back of the monitor may vary from product to product.)  
  
 1. Power portConnect the power cord for your monitor to the power port on the back 
of the monitor.
2. D-sub 15-pin...

    
 
1.Connect the power cord for your monitor to the power port on the back of the monitor. 
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the D-sub cable to the 15-pin, D-sub connector on the back of your monitor. 
 
2-2.Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-sub connection cable.
2-3. In the case of an old model Macintosh, you need to connect the monitor using a special Mac...

Monitor and Bottom  
 
 
   Attaching a Base 
    This monitor accepts a 100 mm x 100 mm VESA-compliant Mounting interface pad .
A. Monitor  
 
B. Mounting interface pad (Sold separately) 
 
   1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove the stand from the LCD monitor.  
4. Align the Mounting interface pad with the holes in the rear cover mounting pad and...

 
Prepare a blank disk and download the driver program file at the Internet web site shown 
here. 
 
zInternet web site :  http://www.samsung.com/  (Worldwide)
http://www.samsung.com/monitor  (U.S.A)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsungmonitor.com.cn/  (China)
 
    Windows ME 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click  Windows ME Driver .  
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
 
4. Click the  Install button in the 
Warning window....

4. If you can see following message window, then click the Continue Anyway button. 
Then click  OK button. 
 
 
 
5. Monitor driver installation is completed.  
 
 
 
This monitor driver is under certifying MS logo,and this installation dont 
damage your system.The certified driver will be posted on Samsung 
Monitor Homepage  
http://www.samsung.com/ . 
 
 
 
 Installing the Monitor Driver (Manual) 
Windows XP | Windows 2000  |Windows Me  |Windows NT  | Linux   
 
 
When prompted by the operating system...

 
     
 
4. Click the 
Properties button on the 
Monitor tab and select 
Driver tab.  
 
     
 
5. Click 
Update Driver.. and select 
Install from a list or.. then click 
Next button.  
 
     
 
6. Select 
Dont search ,I will.. then click 
Next and then click 
Have disk.  
 
     
 
7. Click the 
Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the 
Next button.  
 
 

     
 
8. If you can see following 
Message window, then click the 
Continue Anyway button. Then 
click 
OK button. 
 
  
 
This monitor driver is under certified MS logo,and this installation doesnt damage your 
system.The certified driver will be posted on Samsung Monitor homepage. 
http://www.samsung.com/ 
 
9. Click the 
Close button then click 
OK button continually. 
 
 
 
     
 
10. Monitor driver installation is completed.  
 
 
 
   Microsoft® Windows® 2000 Operating System 
 
When you can see...

1. Click 
Start , 
Setting , 
Control Panel.  
2. Double click the 
Display Icon.  
3. Choose the 
Settings tab and then click 
Advanced...  
4. Choose 
Monitor.  
5. Click 
Driver and then click on 
Update Driver.. then click on the Next button.  
6. Choose 
Display a list of the known drivers for this device so that I can choose a 
specific driver then click 
Next and then click 
Have disk.  
7. Click the 
Browse button then choose A:(D:\Driver).  
8. Click the 
Open button, then click 
OK button.  
9....

 
 Natural Color 
 
Natural Color Software Program
 
 
One of the recent problems in using a computer is that the color of the images printed out by a 
printer or other images scanned by a scanner or a digital camera are not the same as those 
shown on the monitor.  
The Natural Color S/W is the very solution for this problem. It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & 
Telecommunications Research Institute (ETRI). 
This system is...