Samsung Syncmaster 713n Quick Start Guide

							     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose  OK button on the  Insert disk window.  
2. Click the  Browse button on the  File Needed window.  
3. Choose A:(D: Driver) then click th e Open button and then click 
\ OK button.  
How to install
1. Click  Start , Setting  , Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click  Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on  Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this  device so that I can choose a specific 
driver  then click  Next and then click  Have disk.  
7. Click the  Browse button then choose A:(D: Driver).  \ 
8. Click the  Open button, then click  OK button.  
9. Choose your monitor model and click the  Next button then click  Next button.  
10. Click the  Finish button then the  Close button.  
If you can see the  Digital Signature Not Found  window then click the Yesbutton. And 
click the  Finish button then the  Close button. 
Case1: If the Properties button is inactive, it 
means your monitor is properly configured. Please 
stop installation 
Case2: If the Properties button is active, click the Properties button then follow next steps  continually.
 
 
 
						

							1. Click Start, Settings , Control Panel , and then double-click  Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display Modes.  
3. Select a mode that you wish to use (Resolution,  Number of colors and Vertical frequency) and then 
click  OK.  
4. Click  Apply button if you see the screen working normally after clicking Test. If the screen is not 
normal, change to a different  mode (lower mode of resolution, colors or frequency).  
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency 
by referring to the  Preset Display Modes  in the user guide.
 
 
 
    Linux Operating System 
 
        To execute X-Window, you  need to make the X86Config file, which is a type of system setting file.  
  1. Press Enter at the first and the second sc reen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency directly.)  
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.)  
9. Enter the model name of your monitor . This information will not affect the actual execution of X-
Window.  
10. You have  finished setting up your monitor.  
Execute X-Window after setting other requested hardware.  
 
    Microsoft® Windows® NT Operating System
 
 
 
						

							 
 Natural Color 
 
Natural Color Software Program
 
 
One of the recent problems in using a computer is that the color of the images printed out by a printer 
or other images scanned by a scanner or a digital camera are not the same as those shown on the 
monitor.  
The Natural Color S/W is the very solution for this problem.  It is a color administration system 
developed by Samsung Electronics in association with Korea Electronics & Telecommunications 
Research Institute (ETRI). 
This system is available only for Samsung monitors and makes the co lor of the images on the monitor 
the same as the printed or scanned images.  
For more information, refer to Help (F1) in the software program.  
How to install the Natural Color software  
Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the 
program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural 
Color software. 
 
						

							 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to  adjust items in the menu.
3. These buttons allow you to  adjust items in the menu.
4.  Activate a highlighted menu item.
 
SyncMaster 710V/910V/712V/715V/701N
713N
 
						

							 MagicBright™  
MenuDescription
MagicBright™Then push the MagicBright™ button 
again to circle through available 
preconfigured modes. 
 AUTO 
- four different mode (Custom/Text/Internet/Entertain) 
 
 
 Brightness 
MenuDescription
BrightnessAdjust Brightness. 
 
MenuDescription
AUTO  When the 
AUTO button is pressed, the Au
to Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
zIf Auto Adjustment does not work properly, press Auto button again to 
adjust picture with more accuracy.  
zIf you change resolution in the control panel, Auto function will be 
executed automatically. 
 
 
						

							 Picture 
MenuDescription
BrightnessAdjust the Brightness.  
Direct Access Feature 
: When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
MenuDescription
Color Tone The tone of the color can be changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust 
individual R,G,B color control.
GammaSelect one of three pre-defined gammas.
 
 
 Image 
MenuDescription
CoarseImage is used to fine tune and get the best image by removing 
noises that creates unstable images with jitters and shimmers. 
If satisfactory results are not obtained using the Fine 
adjustment, use the Coarse adjustment and then use Fine 
again.
Fine
Image is used to fine tune and get the best image by removing 
noises that creates unstable images with jitters and shimmers. 
If satisfactory results are not obtained using the Fine 
adjustment, use the Coarse adjustment and then use Fine 
again.
Sharpness
Follow these instuction to change the clearance of image.
H-PositionFollow these instructions to c hange the horizontal position of 
the monitors entire display.
V-Position Follow these instructions to chang
e the vertical position of the 
monitors entire display.
 
 
 
						

							MenuDescription
LanguageFollow these steps to change th
e language used in the menu. 
You can choose one of seven languages. (English, German, 
Spanish, French, Italian, Swedish, Russian) 
Note :The language chosen affects only the language of the 
OSD. It has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.
V-Positon You can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the translucency of the background of the OSD.
Display Time The menu will automatically turn off if no adjustments are made 
for a certain time period.  
You can set the amount of time the menu will wait before it 
turns off.
 
 
 OSD 
MenuDescription
Image ResetImage parameters are replaced with the factory default values.
Color ResetColor parameters are replaced wi th the factory default values.
 
 
 Information 
MenuDescription
Information Shows a video source, display mode on the OSD screen. 
  Setup 
 
						

							 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to  adjust items in the menu.
3. These buttons allow you to  adjust items in the menu.
4.  Activate a highlighted menu item.
 
 
SyncMaster 510M/710M/910M
 
						

							 MagicBright™  
MenuDescription
MagicBright™Then push the MagicBright™ button 
again to circle through available 
preconfigured modes. 
  
 AUTO 
- four different mode (Custom/Text/Internet/Entertain) 
 
 
 Brightness 
MenuDescription
BrightnessAdjust Brightness. 
 
 
Menu Description
AUTO  When the 
AUTO button is pressed, the Au
to Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to  self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the  AUTO PATTERN is on. 
zIf Auto Adjustment does not work properly, press Auto button again to 
adjust picture with more accuracy.  
zIf you change resolution in the control panel, Auto function will be 
executed automatically. 
 
 
						

							 
 Picture 
MenuDescription
BrightnessAdjust the Brightness.  
Direct Access Feature 
: When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
MenuDescription
Color Tone The tone of the color can be changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust 
individual R,G,B color balance.
GammaSelect one of three pre-defined gammas.
 
 
 Image 
MenuDescription
CoarseRemoves noise such as vertical stripes. Coarse adjustment may 
move the screen image area. You 
may relocate it to the center 
using the Horizontal Control menu.
Fine
Removes noise such as horizontal stripes. If the noise persists 
even after Fine tuning,  
repeat it after adjusting the frequency (clock speed).
Sharpness Follow these instuction to change the clearance of image.
H-PositionFollow these instructions to c hange the horizontal position of 
the monitors entire display.
V-Position Follow these instructions to chang
e the vertical position of the 
monitors entire display.