Samsung Syncmaster 713n Quick Start Guide

  
  
 
     
Install drivers  Install 
programs  
    
  
     
     
 SyncMaster 710V
SyncMaster 710V/910V/510M/710M/910M/712V/715V/701N
713V
 

 
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.  
 
 
 
Prohibited Important to read and understand at all 
times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Grounding to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for extended period of time, set your computer to DPMS.  
 
If using a screen saver, set it to the active screen mode.  
 
 
 Do not use a damaged or loose plug. 
zThis may cause an...

If using a screen saver, set it to the active screen mode.  
 
 
 Do not use a damaged or loose plug. 
zThis may cause an electric shock or fire.  
 
 
 
  Do not pull the plug out  by the wire nor touch the plug with wet hands. 
zThis may cause an electric shock or fire.  
 
 
 
  Use only a properly ground ed plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  
  Do not excessively bend the plug and wire nor place heavy objects upon 
them, which could cause...

 
  Installation 
  
Put your monitor in a location with low humidity and a minimum of dust. 
zAn electric shock or fire coul d result inside the monitor.  
 
 
zThis may cause damage to the product or human body.  
 
 
Place the monitor on a fl at and stable surface. 
zThe monitor can cause injury by falling.  
 
 
Set down the monitor carefully. 
zIt could be damaged or broken.  
 
 
Do not place the monitor face down. 
z The LCD surface may be damaged.  
 
 
Installing a wall bracket must be  done by...

 
  Clean  
  
When cleaning the monitor case or the surf ace of the TFT-LCD, wipe with a slightly 
moistened, soft fabric. 
 
 
zThis may cause damage, electric shock or a fire.  
 
 
Use the recommended detergen t with a smooth cloth.  
 
 
If the connector between the plug and  the pin is dusty or dirty, clean it 
properly with a dry cloth. 
zA dirty connector can cause an electric shock or fire.  
 
 
Contact a Service Center or Customer  Center for interior cleaning once a 
year. 
zKeep the products...

 
 
 
  Other 
  
Do not remove cover (or back). No user serviceable parts inside. 
zThis may cause an electric shock or a fire. 
 
zRefer servicing to qualified service personnel.  
 
 
If your monitor does not operate normally - in particular, if there are any 
unusual sounds or smells coming from it - unplug it immediately and 
contact an authorized dealer or service .  
zThis may cause an electric shock or fire.  
 
 
Be careful not to let wate r drip into the monitor or expose the monitor to...

Do not move the monitor right or left by pulling only the wire or the signal 
cable. 
zThis may cause a breakdown, electric sh ock or a fire due to damage to the 
cable.  
 
 
Do not cover the vents on the monitor cabinet. 
zBad ventilation may cause a breakdown or fire.  
 
 
Do not place water containers, chemical  products or small metal objects on 
the monitor. 
zThis may cause malfunction, an electric shock or a fire.  
 
zIf a foreign substance enters the monitor, unplug the power cord and contact...

Adjust the resolution and frequency to the levels appropriate for the 
model. 
zInappropriate resolution may cause undesirable picture quality.  
 
17 inch - 1280 X 1024 
 
 
To ease eye strain, take at least a  five-minute break after every hour of 
using the monitor . 
 
 
Do not use the monitor where it can be exposed to strong vibrations.  
zExposure to strong vibrations can be a fire hazard and shorten the life of the 
monitor.  
 
 
When moving the monitor, turn the po wer switch off and unplug the...

 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer. 
 
 
 
 
 Unpacking 
    Monitor 
 
  Monitor Bottom Hanger 
 
 
   Manual  
 
  Quick Setup Guide Warranty Card Users Guide, Monitor 
Dirver, Natural Color 
software, MagicTune™  software 
 
 
      (Not available in all locations)
SyncMaster 710V/910V/712V/715V/701N
713N
 

  
D-Sub Cable  Power Cord  
 
 
 
 
 
Front  
 
 
   

  
  Cable
  1. Menu button [ ] 
Use this button for open the on-screen menu and exits from the menu 
screen or closes screen adjustment menu. 
2. MagicBright™  button [ ] 
MagicBright™ is a new feature providing optimum viewing environment 
depending on the contents of the image you are watching. 
Currently four different modes are available: Custom, Text, Internet, and 
Entertain. 
Each mode has its own pre-configured brightness value. You can...