Home > Samsung > Monitor > Samsung Syncmaster 710m Quick Start Guide

Samsung Syncmaster 710m Quick Start Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Syncmaster 710m Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
     
     General  
    General
    Model NameSyncMaster 710V
    LCD Panel
    Size17 Diagonal
    Display area337.92 (H) x 270.336 (V)
    Pixel Pitch0.264mm (H) x 0.264mm (V)
    Typea-si TFT active matrix
    Synchronization
    Horizontal30 ~ 81 kHz
    Vertical56 ~ 75 Hz
    Display Color
    16,194,277 Colors 
    Resolution
    Optimum resolution1280 x 1024@60 Hz
    Maximum resolution1280 x 1024@75 Hz
    Input Signal, Terminated
    RGB Analog, 0.7 Vpp positive at 75 ohms 
    Separate H/V sync, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 90 ~ 264 VAC, 60/50 Hz ± 3Hz
     
    						
    							Signal Cable
    15pin-to-15pin D-sub cable, attatch
    Power Consumption(maximum)
    Less than 34W 
    Dimensions (WxDxH)/ Weight
    382.0 x 62.0 x 320.5 mm (Without Stand) 
    382.0 x 175.0 x 383.7 mm (with Basic Stand)/4.55kg
    VESA Mounting Interface
    100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.)
    Environmental considerations
    OperatingTemperature: 50°F ~ 104°F(10°C ~ 40°C)  
    Humidity: 10% ~ 80%, non-condensing
    StorageTemperature: -4°F ~113°F (-20°C ~ 45°C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be installed on any Plug & Play comp atible system. Interaction of the monitor and computer 
    systems will provide the best operating conditions and mo nitor settings. In most cases, monitor installation 
    will proceed automatically, unless the user  wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semico nductor technology with precision of 99.999% above 
    is used for this product. But the pixels of RED, GREE N, BLUE and WHITE color seem to be bright sometimes 
    or some of black pixels co uld be seen. This is not from bad quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD pixels that  is contained in this product are 3,932,160. 
    Note: Design and specifications are subject to change without prior notice.
     
     
     
     PowerSaver   
    This monitor has a built-in power management system  called PowerSaver. This system saves energy by 
    switching your monitor into a low-power mode when it  has not been used for a certain amount of time. The 
    monitor automatically returns to normal operation when  you move the computers mouse or press a key on the 
    keyboard. For energy conservation, turn your monitor OFF  when it is not needed, or when leaving it unattended 
    for long periods. The PowerSaver syst em operates with a VESA DPMS compliant video card installed in your 
    computer. Use a software utility installed on  your computer to set up this feature. 
     
    State  Normal Operation  Power saving mode 
    EPA/ENERGY 2000  Power Switch off  
    Power IndicatorGreenGreen, Blinking 
    (Off-mode)Black 
    (at 120V)
    Power ConsumptionLess than 34WLess than 1WLess than 1W
     
    This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant 
    when used with a computer equippe d with VESA DPMS functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this product 
    meets the ENERGY STAR
    ® guidelines for energy efficiency.
     
     
     
    						
    							 
     
     
     
    Preset Timing Modes  
    If the signal transferred from the comp uter is the same as the following Preset Timing Modes, the screen will 
    be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. 
    Refer to the video card manual and adjust the screen as follows.  
     
    Table 1. Preset Timing Modes 
    Display Mode
    Horizontal 
    Frequency  (kHz)Vertical 
    Frequency  (Hz) Pixel Clock (MHz)  Sync Polarity 
    (H/V)
    IBM, 640 x 350  31.469  70.086  25.175  +/- 
    IBM, 640 x 480 31.469 59.940 25.175 -/- 
    IBM, 720 x 400  31.469  70.087  28.322  -/+ 
    MAC, 640 x 480 35.000 66.667 30.240 -/- 
    MAC, 832 x 624  49.726  74.551  57.284  -/- 
    MAC, 1152 x 870 68.681 75.062 100.00 -/- 
    VESA, 640 x 480  37.500  75.000  31.500  -/- 
    VESA, 640 x 480 37.861 72.809 31.500 -/- 
    VESA, 800 x 600  35.156  56.250  36.000  -/- 
    VESA, 800 x 600 37.879 60.317 40.000 +/+ 
    VESA, 800 x 600  46.875  75.000  49.500  +/+ 
    VESA, 800 x 600 48.077 72.188 50.000 +/+ 
    VESA, 1024 x 768  48.363  60.004  65.000  -/- 
    VESA, 1024 x 768 56.476 70.069 75.000 -/- 
    VESA, 1024 x 768  60.023  75.029  78.750  +/+ 
    VESA, 1152 x 864 67.500 75.000 108.00 +/+ 
    VESA, 1280 x 1024  63.981  60.020  108.00  +/+ 
    VESA, 1280 x 1024 79.976 75.025 135.00 +/+ 
    Horizontal Frequency
    The time to scan one line connecting the  right edge to the left edge of the 
    screen horizontally is ca lled Horizontal Cycle and the inverse number of the 
    Horizontal Cycle is called Horizontal Frequency. Unit: kHz  
     
    Vertical Frequency
    Like a fluorescent lamp, the screen has to repeat the same image many 
    times per second to display an image to the user. The frequency of this 
       repetition is called Vertical Freq
    uency or Refresh Rate. Unit: Hz 
     
    						
    							 
     
     General  
    General
    Model NameSyncMaster 910V
    LCD Panel
    Size19 Diagonal
    Display area376.32 (H) x 301.056 (V)
    Pixel Pitch0.294mm (H) x 0.294mm (V)
    Typea-si TFT active matrix
    Synchronization
    Horizontal31 ~ 81 kHz
    Vertical56 ~ 75 Hz
    Display Color
    16,194,277 Colors 
    Resolution
    Optimum resolution1280 x 1024@60 Hz
    Maximum resolution1280 x 1024@75 Hz
    Input Signal, Terminated
    RGB Analog, 0.7 Vpp positive at 75 ohms 
    Separate H/V sync, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 90 ~ 264 VAC, 60/50 Hz ± 3Hz
     
    						
    							Signal Cable
    15pin-to-15pin D-sub cable, attatch
    Power Consumption(maximum)
    Less than 38W 
    Dimensions (WxDxH)/ Weight
    428.0 X 61.8 X 356.0 mm (Without Stand) 
    428.0 X 195.7 X 430.0 mm (with Basic Stand)/4.8kg
    VESA Mounting Interface
    100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.)
    Environmental considerations
    OperatingTemperature: 50°F ~ 104°F(10°C ~ 40°C)  
    Humidity: 10% ~ 80%, non-condensing
    StorageTemperature: -4°F ~113°F (-20°C ~ 45°C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be installed on any Plug & Play comp atible system. Interaction of the monitor and computer 
    systems will provide the best operating conditions and mo nitor settings. In most cases, monitor installation 
    will proceed automatically, unless the user  wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semico nductor technology with precision of 99.999% above 
    is used for this product. But the pixels of RED, GREE N, BLUE and WHITE color seem to be bright sometimes 
    or some of black pixels co uld be seen. This is not from bad quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD pixels that  is contained in this product are 3,932,160. 
    Note: Design and specifications are subject to change without prior notice.
     
     
     
     PowerSaver   
    This monitor has a built-in power management system  called PowerSaver. This system saves energy by 
    switching your monitor into a low-power mode when it  has not been used for a certain amount of time. The 
    monitor automatically returns to normal operation when  you move the computers mouse or press a key on the 
    keyboard. For energy conservation, turn your monitor OFF  when it is not needed, or when leaving it unattended 
    for long periods. The PowerSaver syst em operates with a VESA DPMS compliant video card installed in your 
    computer. Use a software utility installed on  your computer to set up this feature. 
     
    State  Normal Operation  Power saving mode 
    EPA/ENERGY 2000  Power Switch off  
    Power IndicatorGreenGreen, Blinking 
    (Off-mode)Black 
    (at 120V)
    Power ConsumptionLess than 38WLess than 1WLess than 1W
     
    This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant 
    when used with a computer equippe d with VESA DPMS functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this product 
    meets the ENERGY STAR® guidelines for energy efficiency.
     
     
     
    						
    							 
     
     
     
    Preset Timing Modes  
    If the signal transferred from the comp uter is the same as the following Preset Timing Modes, the screen will 
    be adjusted automatically. However, if the signal diffe rs, the screen may go blank while the power LED is on. 
    Refer to the video card manual and adjust the screen as follows.  
     
    Table 1. Preset Timing Modes 
    Display Mode
    Horizontal 
    Frequency  (kHz)Vertical 
    Frequency  (Hz) Pixel Clock (MHz)  Sync Polarity 
    (H/V)
    IBM, 640 x 350  31.469 70.086 25.175  +/- 
    IBM, 640 x 480 31.469 59.940 25.175 -/- 
    IBM, 720 x 400  31.469 70.087 28.322  -/+ 
    MAC, 640 x 480 35.000 66.667 30.240 -/- 
    MAC, 832 x 624  49.726 74.551 57.284  -/- 
    MAC, 1152 x 870 68.681 75.062 100.00 -/- 
    VESA, 640 x 480  37.500  75.000 31.500  -/- 
    VESA, 640 x 480 37.861 72.809 31.500 -/- 
    VESA, 800 x 600  35.156  56.250 36.000  -/- 
    VESA, 800 x 600 37.879 60.317 40.000 +/+ 
    VESA, 800 x 600  46.875  75.000 49.500  +/+ 
    VESA, 800 x 600 48.077 72.188 50.000 +/+ 
    VESA, 1024 x 768  48.363  60.004 65.000  -/- 
    VESA, 1024 x 768 56.476 70.069 75.000 -/- 
    VESA, 1024 x 768  60.023  75.029 78.750  +/+ 
    VESA, 1152 x 864 67.500 75.000 108.00 +/+ 
    VESA, 1280 x 1024  63.981  60.020 108.00  +/+ 
    VESA, 1280 x 1024 79.976 75.025 135.00 +/+ 
    Horizontal Frequency
    The time to scan one line connecting the right edge to the left edge of the 
    screen horizontally is ca lled Horizontal Cycle and the inverse number of the 
    Horizontal Cycle is called Horizontal Frequency. Unit: kHz  
     
    Vertical Frequency
    Like a fluorescent lamp, the screen has to repeat the same image many 
    times per second to display an image to the user. The frequency of this 
       repetition is called Vertical Freq
    uency or Refresh Rate. Unit: Hz 
     
    						
    							 
     
     General  
    General
    Model NameSyncMaster 510M
    LCD Panel
    Size15 Diagonal
    Display area304.1 (H) x 228.1 (V)
    Pixel Pitch0.297mm (H) x 0.297mm (V)
    Typea-si TFT active matrix
    Synchronization
    Horizontal31 ~ 61 kHz
    Vertical56 ~ 75 Hz
    Display Color
    16,194,277 Colors 
    Resolution
    Optimum resolution1024 x 768@60 Hz
    Maximum resolution1024 x 768@75 Hz
    Input Signal, Terminated
    RGB Analog, 0.7 Vpp positive at 75 ohms 
    Separate H/V sync, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 90 ~ 264 VAC, 60/50 Hz ± 3Hz
     
    						
    							Signal Cable
    15pin-to-15pin D-sub cable, attatch
    Power Consumption(maximum)
    Less than 34W 
    Dimensions (WxDxH)/ Weight
    353.9 X 57.0 X 304.7 mm (Without Stand) 
    353.9 X 175.0 X 344.7 mm (with Basic Stand)/4.8kg
    VESA Mounting Interface
    100mm x 100mm (for use with Spec ialty(Arm) Mounting hardware.)
    Environmental considerations
    OperatingTemperature: 50°F ~ 104°F(10°C ~ 40°C)  
    Humidity: 10% ~ 80%, non-condensing
    StorageTemperature: -4°F ~113°F (-20°C ~ 45°C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be installed on any Plug & Play comp atible system. Interaction of the monitor and computer 
    systems will provide the best operating conditions and mo nitor settings. In most cases, monitor installation 
    will proceed automatically, unless the user  wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semico nductor technology with precision of 99.999% above 
    is used for this product. But the pixels of RED, GREE N, BLUE and WHITE color seem to be bright sometimes 
    or some of black pixels co uld be seen. This is not from bad quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD pixels that  is contained in this product are 2,359,296. 
    Note: Design and specifications are subject to change without prior notice.
     
     
     
     PowerSaver   
    This monitor has a built-in power management system  called PowerSaver. This system saves energy by 
    switching your monitor into a low-power mode when it  has not been used for a certain amount of time. The 
    monitor automatically returns to normal operation when  you move the computers mouse or press a key on the 
    keyboard. For energy conservation, turn your monitor OFF  when it is not needed, or when leaving it unattended 
    for long periods. The PowerSaver syst em operates with a VESA DPMS compliant video card installed in your 
    computer. Use a software utility installed on  your computer to set up this feature. 
     
    State  Normal Operation  Power saving mode 
    EPA/ENERGY 2000  Power Switch off  
    Power IndicatorGreenGreen, Blinking 
    (Off-mode)Black 
    (at 120V)
    Power ConsumptionLess than 34WLess than 1WLess than 1W
     
    This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant 
    when used with a computer equippe d with VESA DPMS functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this product 
     
    						
    							  meets the ENERGY STAR
    ® guidelines for energy efficiency.
     
     
     
       
     
    Preset Timing Modes 
    If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will 
    be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. 
    Refer to the video card manual and adjust the screen as follows.  
     
    Table 1. Preset Timing Modes 
    Display Mode
    Horizontal 
    Frequency 
    (kHz)Vertical 
    Frequency 
    (Hz) Pixel Clock 
    (MHz) Sync Polarity 
    (H/V)
    IBM, 640 x 350  31.469  70.086  25.175  +/- 
    IBM, 640 x 480 31.469 59.940 25.175 -/- 
    IBM, 720 x 400  31.469  70.087  28.322  -/+ 
    MAC, 640 x 480 35.000 66.667 30.240 -/- 
    MAC, 832 x 624  49.726  74.551  57.284  -/- 
    VESA, 640 x 480  37.500  75.000  31.500  -/- 
    VESA, 640 x 480 37.861 72.809 31.500 -/- 
    VESA, 800 x 600  35.156  56.250  36.000  -/- 
    VESA, 800 x 600 37.879 60.317 40.000 +/+ 
    VESA, 800 x 600  46.875  75.000  49.500  +/+ 
    VESA, 800 x 600 48.077 72.188 50.000 +/+ 
    VESA, 1024 x 768  48.363  60.004  65.000  -/- 
    VESA, 1024 x 768 56.476 70.069 75.000 -/- 
    VESA, 1024 x 768  60.023  75.029  78.750  +/+ 
    Horizontal Frequency
    The time to scan one line connecting the right edge to the left edge of the 
    screen horizontally is called Horizontal Cycle and the inverse number of the 
    Horizontal Cycle is called Horizontal Frequency. Unit: kHz  
     
    Vertical Frequency
    Like a fluorescent lamp, the screen has to repeat the same image many 
    times per second to display an image to the user. The frequency of this 
    repetition is called Vertical Frequency or Refresh Rate. Unit: Hz 
     
    						
    							 
    Select Model Name   
     
     
     General 
    General
    Model NameSyncMaster 710M
    LCD Panel
    Size17 Diagonal
    Display area337.92 (H) x 270.336 (V)
    Pixel Pitch0.264mm (H) x 0.264mm (V)
    Typea-si TFT active matrix
    Synchronization
    Horizontal30 ~ 81 kHz
    Vertical56 ~ 75 Hz
    Display Color
    16,194,277 Colors 
    Resolution
    Optimum resolution1280 x 1024@60 Hz
    Maximum resolution1280 x 1024@75 Hz
    Input Signal, Terminated
    RGB Analog, 0.7 Vpp positive at 75 ohms 
    Separate H/V sync, TTL level positive or negative.
    Maximum Pixel Clock
    140 MHz
    Power Supply
    AC 90 ~ 264 VAC, 60/50 Hz ± 3Hz
    SyncMaster 710M
     
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Syncmaster 710m Quick Start Guide