Samsung Syncmaster 710m Quick Start Guide

							     
 
10. Monitor driver installation is completed.  
 
 
 
    Microsoft® Windows® 2000 Operating System
 
 
When you can see Digital Signature Not Found on your monitor, follow these steps.
1. Choose  OK button on the  Insert disk window.  
2. Click the  Browse button on the  File Needed window.  
3. Choose A:(D: Driver) then click th e Open button and then click 
\ OK button.  
How to install
1. Click  Start , Setting  , Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click  Advanced...  
4. Choose  Monitor.  
5. Click  Driver and then click on  Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this  device so that I can choose a specific 
driver  then click  Next and then click  Have disk.  
7. Click the  Browse button then choose A:(D: Driver).  \ 
8. Click the  Open button, then click  OK button.  
9. Choose your monitor model and click the  Next button then click  Next button.  
10. Click the  Finish button then the  Close button.  
If you can see the  Digital Signature Not Found  window then click the Yesbutton. And 
click the  Finish button then the  Close button. 
Case1: If the Properties button is inactive, it 
means your monitor is properly configured. Please 
stop installation 
Case2: If the Properties button is active, click the Properties button then follow next steps  continually.
 
 
 
   Microsoft® Windows® Millennium Operating System
 
 
1. Click  Start , Setting  , Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click  Advanced Properties  button.  
4. Select the  Monitor tab.  
5. Click the  Change button in the  Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location..  then click Next button.  
8. Click the  Have Disk button  
9. Specify A: (D: driver) then click  \\ OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you connected to 
your computer and click  OK.  
11. Continue choosing  Close button and  OK button until you close the  Display Properties dialogue 
box.  
(You can get some other screen for warning message  or others, then click the appreciate option for 
your monitor.)  
 
 
 
   Microsoft® Windows® NT Operating System
 
 
 
						

							1. Click Start, Settings , Control Panel , and then double-click  Display icon.  
2. In Display Registration Information window, click Settings Tab and then click  All Display Modes.  
3. Select a mode that you wish to use (Resolution,  Number of colors and Vertical frequency) and then 
click  OK.  
4. Click  Apply button if you see the screen working normally after clicking Test. If the screen is not 
normal, change to a different  mode (lower mode of resolution, colors or frequency).  
If there is no Mode at All Display Modes, select the level of resolution and vertical frequency 
by referring to the  Preset Display Modes  in the user guide.
 
 
 
    Linux Operating System 
 
        To execute X-Window, you  need to make the X86Config file, which is a type of system setting file.  
  1. Press Enter at the first and the second sc reen after executing the X86Config file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency directly.)  
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not affect the actual execution of X-
Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
						

							 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to  adjust items in the menu.
3. These buttons allow you to  adjust items in the menu.
4.  Activate a highlighted menu item.
 
SyncMaster 710V/910V/712V
 
						

							MenuDescription
AUTOWhen the 
AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center. 
Auto adjustment allows the monitor to se lf-adjust to the incoming video signal. 
The values of fine, coarse and position are adjusted automatically.  
 
To make the automatic adjustment function sharper, execute the AUTO function 
while the  AUTO PATTERN  is on.
 
 
 MagicBright™ 
 
MenuDescription
MagicBright™ Then push the MagicBright™ button 
again to circle through available 
preconfigured modes. 
 AUTO 
- four different mode (Custom/Text/Internet/Entertain) 
 
 
 
						

							 Brightness 
MenuDescription
BrightnessAdjust Brightness. 
 
 
						

							MenuDescriptionPlay/Stop
BrightnessAdjust the Brightness.  
Direct Access Feature 
: When OSD is not on the screen, Push 
the button to adjust brightness. 
ContrastAdjust the Contrast. 
 
 
 Color 
MenuDescriptionPlay/Stop
Color Tone The tone of the color can be changed and one of four modes 
can be selected - Cool, normal, Warm and Custom.
Color ControlFollow these steps to adjust 
individual R,G,B color control.
GammaSelect one of three pre-defined gammas.
 
 
 Picture 
 
						

							MenuDescriptionPlay/Stop
CoarseImage is used to fine tune and get the best image by removing 
noises that creates unstable images with jitters and shimmers. 
If satisfactory results are not obtained using the Fine 
adjustment, use the Coarse adjustment and then use Fine 
again.
Fine
Image is used to fine tune and get the best image by removing 
noises that creates unstable images with jitters and shimmers. 
If satisfactory results are not obtained using the Fine 
adjustment, use the Coarse adjustment and then use Fine 
again.
Sharpness
Follow these instuction to change the clearance of image.
H-PositionFollow these instructions to c hange the horizontal position of 
the monitors entire display.
V-Position Follow these instructions to chang
e the vertical position of the 
monitors entire display.
 
 
 Image 
 
						

							MenuDescriptionPlay/Stop
LanguageFollow these steps to change th
e language used in the menu. 
You can choose one of seven languages. (English, German, 
Spanish, French, Italian, Swedish, Russian) 
Note :The language chosen affects only the language of the 
OSD. It has no effect on any software running on the computer.
H-PositionYou can change the horizontal position where the OSD menu 
appears on your monitor.
V-Positon You can change the vertical position where the OSD menu 
appears on your monitor.
TransparencyChange the translucency of the background of the OSD.
Display Time The menu will automatically turn off if no adjustments are made 
for a certain time period.  
You can set the amount of time the menu will wait before it 
turns off.
 
 
 OSD 
 
						

							MenuDescriptionPlay/Stop
Image ResetImage parameters are replaced with the factory default values.
Color ResetColor parameters are replaced wi th the factory default values.
 
 
 Information 
MenuDescription
InformationShows a video source, display mode on the OSD screen. 
 Setup 
 
						

							 
 
1.Opens the OSD menu. Also used to exit the OSD menu or return to the previous menu.
2. These buttons allow you to  adjust items in the menu.
3. These buttons allow you to  adjust items in the menu.
4.  Activate a highlighted menu item.
 MagicTune™2.5 manual
 
SyncMaster 510M/710M/910M