Samsung Syncmaster 275t Quick Start Guide
Have a look at the manual Samsung Syncmaster 275t Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
How to install Click Start, Setting, and then Control Panel. Double click the Display icon. Select the Settings tab and click the Advanced Properties button. Choose Monitor. Case1 : If the Properties button is inactive, it means your monitor is properly configured. Please stop installation Case2 : If the Properties button is active, click the Properties button then follow next steps continually. Click Driver and then click Update Driver. then click the Next button. Choose Display a list of the known drivers for this device so that I can choose a specific driver then click Next and then click Have disk. Click the Browse button then choose A:(D:\Driver). Click the Open button, then click the OK button. Choose your monitor model and click the Next button then click Next button. Click the Finish button then the Close button. If you can see the Digital Signature Not Found window then click the Yes button. And click the Finish button then the Close button. Microsoft® Windows® Millennium Operating System Click Start, Setting, and then Control Panel. Double click the Display icon. Select the Settings tab and click the Advanced Properties button. Select the Monitor tab. Click the Change button in the Monitor Type area. Choose Specify the location of the driver. Choose Display a list of all the driver in a specific location. then click the Next button. Click the Have Disk button. Specify A:\(D:\driver) then click the OK button. Select Show all devices and choose the monitor that corresponds to the one you connected to your computer and click OK. Continue choosing Close button and OK button until you close the Display Properties dialogue box. Microsoft® Windows® NT Operating System Click Start, Settings, Control Panel, and then double-click the Display icon. In the Display Registration Information window, click the Settings tab and then click All Display Modes. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK. Click the Apply button if you see the screen working normally after clicking Test. If the screen is not normal, change to a different mode (lower mode of resolution, colors, or frequency). If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide. Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. Press Enter at the first and the second screen after executing the X86Config file. The third screen is for setting your mouse. Set a mouse for your computer. The next screen is for selecting a keyboard. Set a Keyboard for your computer. The next screen is for setting your monitor. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) Set a vertical frequency for your monitor. (You can enter the frequency directly.) Enter the model name of your monitor. This information will not affect the actual execution of X- Window. You have finished setting up your monitor. Execute X-Window after setting other requested hardware.
Control Buttons Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. Analog/Digital(PC) : MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then press the button again to circle through available preconfigured modes. ( Custom → Text → Internet → Game → Sports → Movie → Dynamic CR ) Digital(DVD)/AV/S-Video/Component : Mode The Monitor has four automatic picture settings that are preset at the factory. Then press the button again to circle through available preconfigured modes. ( Dynamic → Standard → Movie → Custom ) This button allows you to adjust items in the menu. This button allows you to adjust items in the menu.
When OSD is not on the screen, push the button to adjust brightness. Press this button to activate a highlighted menu item. Selects the input signal while the OSD is off. AUTOPress to self-adjust to the incoming Analog signal. The values of fine,coarse and position are adjusted automatically. PIP Push the PIP button to turn PIP On/Off. Direct Functions AUTO Menu Description AUTO When the AUTO button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming PC signal. The values of fine, coarse and position are adjusted automatically. (Available in Analog mode only) To make the automatic adjustment function sharper, execute the AUTO function while the AUTO PATTERN is on. If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock In case of pushing AUTO or PIP button after locking OSD
In case of pushing MENU button after locking OSD Menu Description LockedThis is the function that locks the OSD in order to keep the current states of settings or prevent others from adjusting the current settings. Lock : Hold down the menu button for more than five (5) seconds to activate the OSD adjustment lock function. Unlock : Hold down the menu button for more than five (5) seconds to deactivate the OSD adjustment lock function. Though the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust MagicBright ( ) using the Direct button. MagicBright™
Menu Description Play/Stop MagicBright™ /ModeAnalog/Digital(PC) : MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then press the button again to circle through available preconfigured modes. (Custom → Text → Internet → Game → Sports → Movie → Dynamic CR ) Digital(DVD)/AV/S-Video/Component : Mode The Monitor has four automatic picture settings that are preset at the factory. Then press the button again to circle through available preconfigured modes. ( Dynamic → Standard → Movie → Custom ) MagicBright™ Mode Brightness
Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description SOURCESelects the input signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- Analog, Digital, AV, S-Video and Component input signal.) Changing the source is only allowed for external devices that are connected to the monitor at the time. PIP ( Available in Analog/Digital(PC) Mode Only )
Menu Description PIPPush the PIP button to turn PIP screen On/Off. You can view a picture from AV, S-Video, or Component through the PIP screen in Analog and Digital (PC) mode. OSD Function Input The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.
Menu Description Play/Stop Source ListUse to select PC or other external input sources connected to the Monitor. Use to select the screen of your choice. 1) Analog 2) Digital 3) AV 4) S-Video 5) Component MENU → → → , → Edit NameName the input device connected to the input jacks to make your input source selection easier. 1) Analog 2) Digital 3) AV 4) S-Video 5) Component MENU → → , → → , → → , → Picture (Analog / Digital : PC) The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Menu Description Play/Stop MagicBright™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently seven different modes are available: Custom, Text, Internet, Game, Sport, Movie and Dynamic CR. Each mode has its own pre-configured brightness value. You can easily select one of seven settings by simply pressing MagicBright™ control button. 1) Custom : Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by
MagicBright™ MENU → , → → → , → using the OSD menu. 2) Text : For documentations or works involving heavy text. 3) Internet : For working with a mixture of images such as texts and graphics. 4) Game : For watching motion pictures such as a game. 5) Sports : For watching motion pictures such as a Sports. 6) Movie : For watching motion pictures such as a DVD or Video CD. 7) Dynamic CR : Dynamic CR is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. CustomYou can use the on-screen menus to change the contrast and brightness according to personal preference. - Not available in Dynamic CR Mode MENU → , → → , → → , → → , → 1) Contrast : Adjust the Contrast. 2) Brightness : Adjust the Brightness. Contrast Brightness If you adjust picture using Custom function, MagicBright™ will turn to Custom mode. Image LockImage Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. - Available in Analog Mode Only MENU → , → → , → → , → → , → 1) Coarse : Adjust the screen so that all vertical lines (noise) on the screen are removed. Then, use the horizontal position adjustment menu to move the screen to the center, as the screen position may change after the noise has been removed. 2) Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). 3) Sharpness : Adjust the Sharpness. - Not available in Dynamic CR Mode 4) H-Position : Adjusts the screen location horizontally. 5) V-Position : Adjusts the screen location vertically. Coarse Fine Sharpness H-Position V-Position Auto AdjustmentThe values of Fine, Coarse, position are adjusted automatically. By changing the resolution in the control panel, auto function is performed. - Available in Analog Mode Only MENU → , → → , → SizeYou can switch the Size. 1) Wide
MENU → , → → , → → , → 2) 4:3 PIP PictureWhen the PIP is on, you can adjust the PIP screen setting. MENU → , → → , → → , → → , → 1) Contrast : Adjusts the Contrast of the PIP window on the screen. 2) Brightness : Adjusts the Brightness of the PIP window on the screen. 3) Sharpness : Adjusts the Sharpness of the PIP window on the screen 4) Color : Adjusts the Color of the PIP window on the screen 5) Tint : Adds a natural tone to the PIP window. - Available in AV/S-Video Mode Only Contrast Bightness Sharpness Color Tint Picture (Digital : Digital DVD/AV/S-Video/Component) The default setting may different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution. Menu Description Play/Stop ModeThe Monitor has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select Custom which automatically recalls your personalized picture settings. 1) Dynamic : Select this mode to view a sharper image than in Standard mode. 2) Standard : Select this mode when the surroundings are bright. This also provides a sharp image. 3) Movie : Select this mode when the surroundings are dark.