Samsung Syncmaster 275t Quick Start Guide

							 
 
 
 
 
 
 
 
 
 
   
This monitor allows the user to connect it to such input devices as a DVD player, a VCR 
or a camcorder without disconnecting the PC. 
The configuration at the back of the monitor may vary from product to product. 
 
 
 
 Connecting AV Devices
The monitor has AV connection terminals to connect AV input devices like DVD, VCR or 
Camcorder. You may enjoy AV signals as long as the monitor is turned on. 
Input devices such as DVD, VCR or Camcorder are connected to the RCA or S-VIDEO terminal 
of the monitor using the RCA or S-Video cable. 
Then, start the DVD, VCR or Camcorder with a DVD disc or tape inserted.  
Select AV or S-Video using the SOURCE.
 
 
 
 Connecting Digital DVD 
The monitor has DVI IN connection terminals to connect DVI input devices digital DVD.
Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the 
DVI cable. 
Then, start the DVD with a DVD disc inserted. 
Select Digital using the SOURCE button.
 
						

							 
 
Connecting DVD/DTV Set Top Box 
Connect to the DVD/DTVSet Top Box input if the device has a DVD/DTV connector.  
You can watch Component simply by hooking up the Component with the monitor as 
long as the power is on.
Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the PR, PB, Y input ports using a 
component video cable (PR, PB, Y). 
Then, start the DVD with a DVD disc inserted. 
Select Component using the SOURCE button. 
 
 Using the Stand
 
 
Sliding stand
 
 Stand Stopper
 
 
 Swivel stand
 
						

							 
 
 
 
Using ( ),You can swivel the monitor left and right at an angle of 90° to set the monitor 
lengthwise. The rubber under the stand is to avoid the monitor slide.
When you try to rotate the monitor in the state of the power cord or cable connecting to 
the monitor, the power cord of cable can be destroyed. 
 
 
 Tilt angle 
Using (  ), You can ad just the  tilt an lgle within  a  range of 3° forward to  25° backw ard for 
the most comfortable viewing angle.
   
 
 
 Attaching a Base
This monitor accepts a 200 mm x 100 mm VESA-compliant Mounting interface pad.
 
 
 
						

							 
 
   
 
Monitor 
  
Mounting interface pad (Sold separately) 
1. Turn off your monitor and unplug its power cord.
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the 
screen.
3. Remove four screws and then remove the stand from the LCD monitor.
4. Align the mounting interface Pad with the holes in the rear cover mounting pad and 
secure it with four screws that came with the arm-type base, wall mount hanger or other 
base.
To mount the monitor on a wall, you should purchase the wall mounting kit that allows 
you to mount the monitor at least 10 cm away from the wall surface.  
Contact the nearest Samsung Service Center for more information. 
Samsung Electronics will not be responsible for damages caused by using a base other 
than those specified.  
Please use Wall Mount according to the International standards.
 
						

							 
 
 Monitor Driver 
When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the  directions appropriate for the operating system you have.    
Prepare a blank disk and download the driver program file at the Internet web site shown below.    
Internet web site : http://www.samsung.com/  (Worldwide)
http://www.samsung.com/monitor (U.S.A)
http://www.sec.co.kr/monitor  (Korea)
http://www.samsungmonitor.com.cn
/(China)
Installing the Monitor Driver (Automatic)
 Insert the CD into the CD-ROM drive. 
Click  Windows .
Choose your monitor model in the model list, then click the OK button.  
 
 
If you can see following message window, then click the Continue Anyway button. Then click the 
OK button (Microsoft® Windows® XP/2000 Operating System).   
  
 
 
						

							 
 
 
 
   
 This monitor driver is under certifying MS logo, and this installation doesnt damage your 
system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
Monitor driver installation is completed. 
Installing the Monitor Driver (Manual)
Windows Vista | Windows XP | Windows 2000 | Windows ME | Windows NT | Linux 
Microsoft® Windows Vista™ Operating System   
 
Insert your Manual CD into your CD-ROM drive.
Click  (Start) and Control Panel. Then, double-click on Appearance and Personalization.  
 
 
   
Click Personalization and then Display Settings.  
 
 
   
Click Advanced Settings….  
  
 
Click Properties in the Monitor tab. If the Properties button is deactivated, it means the 
configuration for your monitor is completed. The monitor can be used as is. 
If the message “Windows needs…” is displayed, as shown in the figure below,  
click Continue. 
 
						

							 
 
    
This monitor driver is under certifying MS logo, and this installation doesnt damage your 
system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
Click Update Driver… in the Driver tab.  
 
 
   
Check the Browse my computer for driver software checkbox and click Let me pick from a list 
of device drivers on my computer.  
 
 
   
Click Have Disk… and select the folder (for example, D:\Drive) where the driver setup file is 
located, and click OK.  
 
   
Select the model that matches your monitor from the list of monitor models on the screen, and 
click Next.  
 
						

							 
    
 
Click Close
→ Close 
→ OK 
→ OK on the following screens displayed in sequence. 
   
   
Microsoft® Windows® XP Operating System  
 
Insert the CD into the CD-ROM drive.
Click Start 
→ Control Panel then click the Appearance and Themes icon.  
  
 
Click Display icon and choose the Settings tab then click Advanced. 
 
						

							  
 
Click the Properties button on the Monitor tab and select Driver tab.  
     
 
Click Update Driver. and select Install from a list or. then click Next button.  
   
 
Select Dont search ,I will. then click Next and then click Have disk.  
  
 
Click the Browse button then choose A:(D:\Driver) and choose your monitor model in the model 
list and click the Next button.  
 
						

							 
   
 
If you can see following Message window, then click the Continue Anyway button. Then click 
the OK button.  
 
 
 
 
This monitor driver is under certifying MS logo, and this installation doesnt damage your 
system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
Click the Close button then click the OK button continually.  
  
 
Monitor driver installation is completed.  
 
Microsoft® Windows® 2000 Operating System  
 
 When you can see Digital Signature Not Found on your monitor, follow these steps.  
 
 
Choose the OK button on the Insert disk window. 
Click the Browse button on the File Needed window. 
Choose A:(D:\Driver) then click the Open button and then click the OK button.