Samsung Syncmaster 275t Quick Start Guide

 
 
   
MENU →  ,  →  →  →  ,  →   This will save power and reduce eye fatigue.
4) Custom 
: Select this mode when you want to adjust the image 
according to your preferences
CustomYou can use the on-screen menus to change the contrast and 
brightness according to personal preference. 
 
 
MENU →  ,  →  →  ,  →  →  ,  →  →  ,  →
1) Contrast 
: Adjust the Contrast. 
2) Brightness 
: Adjust the Brightness. 
3) Sharpness 
: Adjust the Sharpness.
4) Color 
: Adjust the picture Color. 
5) Tint 
: Adds a...

 
 
 
  Menu Description Play/Stop
MagicColorImplements the natural color chroma according to the display 
screen. Automatically adjusts to the display screen.  
Can improve the skin tones.  
 
- Not available in Dynamic CR Mode 
 
MENU →  ,  →  →  →  ,  → 
1) Off
2) Intelligent 
Enhance natural color except skin tone. 
3) Full 
Displays both natural skin tones and enhanced colors. 
4) Demo 
Displays the improved image on the left and the original on 
the right.
Color Tone Adjusts color tones to the...

 
 
 
 
The default setting may different depending on the selected Input Mode (input signal 
source selected in External Input List) and the selected resolution.
Menu Description Play/Stop
PIPTurn the PIP Screen on or off.  
You can view a picture from AV, S-Video, or Component through the 
PIP screen in Alalog and Digital mode. 
 
 
MENU →  ,  →  →  →  ,  →   1) Off 
2) On 
SourceSelect the input source for the PIP. 
You can view a picture from AV, S-Video, or Component through the 
PIP screen in...

 
The default setting may different depending on the selected Input Mode (input signal 
source selected in External Input List) and the selected resolution. 
Menu Description Play/Stop
LanguageYou can choose one of 11 languages.  
 
 
MENU →  ,  →  →  →  ,  → 
Transparency Changes the opaqueness of the background of the OSD. 
 
 
MENU →  ,  →  →  ,  →  →  ,  → 
1) High 
2) Medium 
3) Low 
4) Opaque 
Blue ScreenIf no signal is being received or the signal is very weak, a blue screen 
automatically...

 
 Check List
Before calling for service, check the information in this section to see  if you can remedy any problems yourself. If you do need assistance,  
please call the  phone number on the Information section or contact your dealer . 
Symptom Check List Solutions
No images on the 
screen.  
I cannot turn on the 
monitor. Is the power cord 
connected properly?
Check the power cord connection and supply.
Can you see Check 
signal cable on the 
screen?  (Connected using the D-sub cable)  
Check the...

There is no image on the 
screen.  
Is the power indicator on 
the monitor blinking at 1 
second intervals?The monitor is in PowerSaver mode.  
 
Press a key on the keyboard to activate the 
monitor and restore the image on the screen.  
 
If there is still no image, press the   
button.  
Then press any key on the keyboard again to 
activate the monitor and restore the image on 
the screen. 
Connected using the DVI 
cable?You may get a blank screen if you boot the 
system before you connect the DVI...

 
 
 
 
 
reads Unrecognized 
monitor, Plug & Play 
(VESA DDC) monitor 
found. 
monitor driver?
Driver Installation Instructions .
See the video card 
manual to see if the Plug 
& Play (VESA DDC) 
function can be 
supported.  Install the monitor driver according to the 
Driver Installation Instructions
.
Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when...

scratch the case. Do not allow any water to go inside 
the monitor. 
 
 
 
 
 
 
 
 
 
 
 
 Self-Test
Self-Test Feature Check  |  Warning Messages  |  Environment  |  Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is functioning 
properly. 
Self-Test Feature Check 
Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer. 
Turn on the monitor. 
If the monitor is functioning properly, you will see a box in the...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
Judging the monitors working condition  
 
If there is no image on the screen or a Not Optimum Mode, Recommended Mode 1920 x 1200 60 
Hz message comes up, disconnect the cable from the computer while the monitor is still powered on.  
 
If there is a message coming up on the screen or if the screen goes white, this means the monitor 
is in working condition. 
In this case, check the computer for trouble. 
 

 Specifications
General
Model Name SyncMaster 275T
LCD Panel
Size 27 Wide Diagonal (68 cm) 
Display area 581.76 mm  (H) x 363.6 mm  (V) 
Pixel Pitch 0.303 mm (H) x 0.303 mm (V) 
Synchronization
Horizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color
16.7M
Resolution
Optimum resolution 1920x1200@60Hz 
Maximum resolution 1920x1200@60Hz 
Input Signal, Terminated
RGB Analog, DVI-D, AV, S-Video, Component,USB(1U/4D) 
0.7 Vp-p ± 5% 
TTL level (V high ¡Ã 2.0V, V low 
¡Â 0.8V) 
Maximum Pixel Clock
154 MHz...