Samsung Syncmaster 275t Quick Start Guide

Ex)
The best way to protect your monitor from Image retention is to set your PC or 
S
ystem to operate a Screen Saver program when you are not using it.
Image retention may not occur when a LCD panel is operated under normal conditions. 
 
Normal conditions are defined as continuously changing video patterns. When the LCD 
panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be 
slight difference in voltage between electrodes that work the liquid crystal (LC) in a 
pixel....

 
 
 
 
 
 
 
 Package Contents
Please make sure the following items are included with your monitor.  If any items are missing,  contact your dealer.  
Contact a local dealer  to buy optional items.
Unpacking
 
  
Without Stand
Monitor 
 
 
 
With Stand 
Monitor & Sliding Stand
Manual
 
Warranty Card 
 

 
 
 
 
 
 
 
 
 
 
 
 
   Quick Setup Guide(Not available in all 
locations)Users Guide, Monitor Driver 
Cable
 
 
Power Cord D-sub Cable  
Sold separately
 
  S-Video Cable RCA Cable  USB Cable 
 
  Component Cable DVI-D Cable
Speaker package(option) 
 
 
 Speaker  
 
 
 
 Your Monitor
Front
 
 

 
 
MENU button [ ]  
 Opens the OSD menu.  
Also use to exit the OSD menu or return to the previous menu.
Adjust buttons [ ] These buttons allow you to adjust items in the menu.
Analog/Digital(PC) : 
MagicBright™ button  
[]  
 
 
 
 MagicBright™ is a new feature providing optimum viewing environment 
depending on the contents of the image you are watching. Currently 
seven different modes are available: Custom, Text, Internet, Game, 
Sports, Movie and Dynamic CR. Each mode has its own pre-configured...

 
 
 
 
 
 
  This will save power and reduce eye fatigue. 
4) Custom 
Select this mode when you want to adjust the image according to your 
preferences. 
>> Click here to see an animation clip 
Brightness button [ ]  
 When OSD is not on the screen, push the button to adjust brightness. 
>> Click here to see an animation clip 
Enter button [ ] /  
SOURCE button Activates a highlighted menu item. /  
Push the  , then selects the video signal while the OSD is off. (When 
the   button is pressed to change...

  
 
POWER  
: Connect the power cord for your monitor to the POWER on the 
back of the monitor. 
  
 DVI(HDCP) / RGB 
 
 
 
 
 DVI(HDCP) 
: Connect the DVI cable to the DVI(HDCP) port 
on the back of your monitor.
RGB 
: Connect the RGB terminal at the back of your monitor to your 
computer. 
  
 VIDEO / S-VIDEO / AUDIO 
POWER 
 
 
 
 
 VIDEO 
: External device (video) input terminal 
S-VIDEO 
: External device (S-video) input terminal
AUDIO POWER  
: Connect the speaker power line connected to the...

   
 
zThe Kensington lock is a device used to physically fix the system 
when using it in a public place.  
(The locking device has to be purchased separately.) 
For using a locking device, contact where you purchase it.
 Stand Stopper
 
 
  
zRemove the fixing pin on the stand to lift the monitor up and down. 
See Connecting Cables for further information regarding cable connections.
 

 
 
 
 
Connecting Cables 
Connect the power cord for your monitor to the POWER port on the back of the monitor.  
Plug the power cord for the monitor into a nearby outlet. 
Use appropriate connection for your computer.
 
Using the RGB (Analog) connector on the video card.  
- Connect the signal cable to the 15-pin, RGB port on the back of your monitor.  
 
 [ RGB ]  
 
Using the DVI (Digital) connector on the video card.  
- Connect the DVI cable to the DVI(HDCP) port on the back of your monitor.  
 
 [...

 
 
 
   
  Power Consumption2.5W  
(Max., each port)2.5W  
(Max., each port)2.5W  
(Max., each port)
 
 
 
Connect the 
 UP port of the monitor and the USB port of the computer with the USB cable. 
To use   DOWN port, you have to connect the UP (Upstream Cable) to the PC. 
Make sure to use the USB cable supplied with this monitor to connect the monitors 
 
UP port and your computers USB port.  
 
Connect the   DOWN port of the USB monitor and a USB device with the USB cable.
The use procedures are as...

 
 
 
 
 
 
 When connecting a speaker, be careful that the grooves of the monitor and the speaker . 
( )are aligned with each other.  
Adjust the aligned positions until you hear a ‘click’. If a speaker is connected correctly, 
you can hear a ‘click’.If a speaker is connected without you hearing a ‘click’, the holding 
part may become damaged.
If you need to separate, please pull ( ) a little and push to the right.
 
MIC / SPK 
 
Connect the red cable of the cables provided when the speaker was...