Samsung Syncmaster 226bw Quick Start Guide

							   
 
Select Dont search ,I will. then click Next and then click Have disk.  
  
 
Click the Browse button then choose A:(D:\Driver) and choose your monitor model in the model 
list and click the Next button.  
  
 
If you can see following Message window, then click the Continue Anyway button. Then click 
the OK button.  
 
 
 
 
This monitor driver is under certifying MS logo, and this installation doesnt damage your 
system.  
The certified driver will be posted on Samsung Monitor homepage  
 
http://www.samsung.com/ 
Click the Close button then click the OK button continually.  
 
						

							 
 
 
   
 
Monitor driver installation is completed.  
 
Microsoft® Windows® 2000 Operating System  
 
 When you can see Digital Signature Not Found on your monitor, follow these steps.  
 
 
How to install 
Choose the OK button on the Insert disk window. 
Click the Browse button on the File Needed window. 
Choose A:(D:\Driver) then click the Open button and then click the OK button. 
Click Start, Setting, and then Control Panel. 
Double click the Display icon. 
Select the Settings tab and click the Advanced Properties button. 
Choose Monitor.  
Case1 : If the Properties button is inactive, it means your monitor is properly configured. Please 
stop installation 
Case2 : If the Properties button is active, click the Properties button then follow next steps 
continually.
Click Driver and then click Update Driver. then click the Next button. 
Choose Display a list of the known drivers for this device so that I can choose a specific driver 
then click Next and then click Have disk.
Click the Browse button then choose A:(D:\Driver). 
Click the Open button, then click the OK button. 
Choose your monitor model and click the Next button then click Next button. 
Click the Finish button then the Close button.  
 
If you can see the Digital Signature Not Found window then click the Yes button. And click the 
Finish button then the Close button. 
Microsoft® Windows® Millennium Operating System    
 
Click Start, Setting, and then Control Panel. 
Double click the Display icon. 
Select the Settings tab and click the Advanced Properties button. 
Select the Monitor tab. 
Click the Change button in the Monitor Type area. 
Choose Specify the location of the driver.
Choose Display a list of all the driver in a specific location. then click the Next button. 
Click the Have Disk button. 
Specify A:\(D:\driver) then click the OK button. 
 
						

							 
 
 
 
 
Select Show all devices and choose the monitor that corresponds to the one you connected to 
your computer and click OK. 
Continue choosing Close button and OK button until you close the Display Properties dialogue 
box. 
Microsoft® Windows® NT Operating System    
 
Click Start, Settings, Control Panel, and then double-click the Display icon.
In the Display Registration Information window, click the Settings tab and then click All Display 
Modes.
Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and 
then click OK. 
Click the Apply button if you see the screen working normally after clicking Test. If the screen 
is not normal, change to a different mode (lower mode of resolution, colors, or frequency). 
If there is no Mode at All Display Modes, select the level of resolution and vertical 
frequency by referring to the Preset Timing Modes in the user guide.
Linux Operating System    
 
To execute X-Window, you need to make the X86Config file, which is a type of system setting file.  
 
Press Enter at the first and the second screen after executing the X86Config file. 
The third screen is for setting your mouse. 
Set a mouse for your computer. 
The next screen is for selecting a keyboard. 
Set a Keyboard for your computer. 
The next screen is for setting your monitor. 
First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 
Set a vertical frequency for your monitor. (You can enter the frequency directly.) 
Enter the model name of your monitor. This information will not affect the actual execution of X-
Window. 
You have finished setting up your monitor.  
Execute X-Window after setting other requested hardware. 
 
						

							 
 
 
 Control Buttons 
 
[MENU /  ] Opens the OSD menu. Also use to exit the OSD menu or return to the 
previous menu. 
[ ] These buttons allow you to adjust items in the menu.
[ ] Press this button to acti vate a highlighted menu item. 
[AUTO] When the AUTO button is press ed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.
 
 Direct Functions 
AUTO
 
						

							 
 
 
Menu Description
AUTO When the AUTO button is pressed, the Auto Adjustment screen appears as 
shown in the animated screen on the center.  
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal. 
The values of fine, coarse and position are adjusted automatically.  
(Available in Analog mode only)  
 
 
To make the automatic adjustment function sharper, execute the AUTO function 
while the AUTO PATTERN is on.  
 
If auto adjustment does not work properly, press AUTO button again to adjust 
picture with more accuracy.
If you change resolution in the control panel, auto function will be executed 
automatically. 
OSD Locked & Unlock
 
AUTO 
 
						

							 
 
 
 
 MENU 
Menu Description
OSD Locked & 
UnlockThis is the function that locks the OSD in order to keep the current states of 
settings or prevent others from adjusting the current settings.  
 
Locked : Hold down the menu button for more than five (5) seconds to activate 
the OSD adjustment lock function. 
 
Unlock : Hold down the menu button for more than five (5) seconds to 
deactivate the OSD adjustment lock function. 
 
Though the OSD adjustment lock function is activated, you can still adjust 
the brightness and contrast, and adjust MagicBright ( ) using the Direct 
button.
MagicBright™
 
						

							 
 
 
 
 
 
  
Menu Description
 
MagicBright™Push the MagicBright™ button to circle through available preconfigured 
modes.  
 
- seven different modes (Custom/Text/Internet/Game/Sport/Movie/Dynamic 
Contrast) 
Brightness
 
Menu Description
 
Brightness When OSD is not on the screen, push the button to adjust brightness.
 
						

							 
 
 
 SOURCE
 
Menu Description
SOURCE Selects the Video signal while the OSD is off. (Analog/Digital) 
 
 
OSD Function 
Picture Brightness  Contrast
Color MagicColor  Color Tone  Color Control  Gamma
Image Coarse  Fine  Sharpness  H-Position  V-Position
OSD Language  H-Position  V-Position  Transparency  Display Time
Setup Auto Source  Image Reset  Color Reset  RTA
Information
 
 
Picture 
 
						

							 
 
 
 
 
Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature : When OSD is not on the screen, 
push the button to adjust brightness.  
>> Click here to see an animation clip  
 
MENU ¡æ  ¡æ  ¡æ  ,  ¡æ MENU
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference.  
 
MENU ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
Color 
 
						

							 
 
 
  Menu Description Play/Stop
MagicColorMagicColor is a new technology that Samsung has exclusively 
developed to improve digital image and to display natural color 
more clearly without disturbing image quality.  
 
 
Off Returns to the original mode.
Demo The screen before applying MagicColor appears 
on the right and the screen after applying 
MagicColor appears on the left. 
Full Displays not only vivid natural color but also 
more realistic natural skin color with clearness. 
Intelligent Displays vivid natural color with clearness.  
Color ToneThe tone of the color can be changed and one of four modes 
can be selected -Cool, Normal, Warm and Custom.  
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
Color ControlAdjusts individual Red, Green, Blue color balance. -Red, Green, 
Blue  
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
GammaGamma correction changes the luminance of the colors with 
intermediate luminance.  
 
- Mode 1  
- Mode 2  
- Mode 3  
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
Image 
Menu Description Play/Stop
CoarseRemoves noise such as vertical stripes.  
Coarse adjustment may move the screen image area. You 
may relocate it to the center using the horizontal control 
menu.