Samsung Syncmaster 226bw Quick Start Guide

 
  
  
  
  
  
  
  
  
  
  
  
  
  
 
 
 
Install drivers
 
   
 
 
SyncMaster 206BW / 226BW
 

 Notation
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to the 
equipment.
 
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet 
Do not touchGround to prevent an electric shock 
 
 
 Power
When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to active screen mode.
 
 
Do not use a damaged or loose plug.  
 
This may cause electric shock or...

 
 
Do not pull the plug out by the wire nor touch the plug with wet hands.  
 
This may cause electric shock or fire.
 
 
Use only a properly grounded plug and receptacle.  
 
An improper ground may cause electric shock or equipment damage. 
 
 
Insert the power plug firmly so that it does not come loose.  
 
A bad connection may cause fire. 
 
 
Do not excessively bend the plug and wire nor place heavy objects upon them, which 
could cause damage.  
 
This may cause electric shock or fire. 
 
 
Do not...

 Installation
  Be sure to contact an authorized Service Center, when installing your monitor in a 
location with heavy dust, high or low temperatures, high humidity, and exposed to 
chemical substances and where it operates for 24 hours such as at airports, train 
stations etc. 
 
Failure to do so may cause serious damage to your monitor.
 
 
Place your monitor in a location with low humidity and a minimum of dust.  
 
Failure to do so may cause electric shock or fire inside the monitor. 
 
 
Do not...

 
 
Do not install the product in places with poor ventilation, for instance, a bookshelf, 
closet, etc.  
 
Any increase in the internal temperature may cause fire.
 
 
Put down the monitor carefully.  
 
Failing to do so may damage the monitor.
 
 
Do not place the monitor face down.  
 
This may damage the TFT-LCD surface. 
 
 
The installation of the bracket must be done by a qualified professional. 
 
Installing the bracket by unqualified personnel may result in injury. 
Always use the mounting...

 
 
Use the recommended detergent with a smooth cloth. 
 
 
If the connector between the plug and the pin is dusty or dirty, clean it properly using 
a dry cloth.  
 
A dirty connector may cause electric shock or fire.
 
 
Make sure to unplug the power cord before cleaning the product.  
 
Otherwise, this may cause electric shock or fire. 
 
 
Unplug the power cord from the power outlet and wipe the product using a soft, dry 
cloth.  
 
Do not use any chemicals such as wax, benzene, alcohol, thinners,...

This may cause electric shock or fire. 
 
 
Keep the product away from places exposed to oil, smoke or moisture; do not install 
inside a vehicle.  
 
This may cause a malfunction, electric shock or fire.  
In particular, avoid operating the monitor near water or outdoors where the monitor 
could be exposed to snow or rain. 
 
 
If the monitor is dropped or the casing is damaged, turn the monitor off and unplug 
the power cord. Then contact the Service Center.  
 
The monitor may malfunction, causing...

This may cause an explosion or fire.  
 
Never insert anything metallic into the monitor openings.  
 
This may cause electric shock, fire or injury. 
 
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects 
such as paper or matches into the vent, headphone port or AV ports or etc.  
 
This may cause electric shock or fire. 
If an alien substances or water enters th e product, turn the product off, unplug the 
power connector from the wall outlet and contact the  Service...

 
 
 
 
 
 
Failure to disconnect cables may damage it and cause fire or electric shock. 
 
Place the product out of childrens reach, as they could damage by hanging onto it.  
 
A falling product may cause injury  to the person or even fatality.
 
When not using the product for an extended period of time, keep the product 
unplugged.  
 
Otherwise, this may cause heat emission from the accumulated dirt or degraded 
insulation, causing electric shock or fire.  
 
Do not place your childrens favorite toys...

 
This marking shown on the product or its literature, indicates that it should not 
be disposed with other household wastes at the end of its working life. To 
prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it 
responsibly to promote the sustainable reuse of material resources.  
 
Household users should contact either the retailer where they purchased this 
product, or their local government office,...