Samsung Syncmaster 226bw Quick Start Guide

 
 
 
 
MENU ¡æ  ,  ¡æ  ¡æ  ¡æ  ,  ¡æ MENU
FineRemoves noise such as horizontal stripes.  
If the noise persists even after fine tuning, repeat it after 
adjusting the frequency (clock speed).  
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
SharpnessChanges the clearance of image.  
 MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
H-PositionChanges the horizontal position of the monitors entire 
display.  
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
V-PositionChanges the vertical position of the monitors entire...

 
 
 
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
TransparencyChange the transparency of the background of the OSD.  
 MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
Display TimeThe menu will be automatically turned off if no adjustments are 
made for a certain time period.  
You can set the amount of time the menu will wait before it is 
turned off.  
- 5 sec, 10 sec, 20 sec, 200 sec  
 
MENU ¡æ  ,  ¡æ  ¡æ  ,  ¡æ  ¡æ  ,  ¡æ MENU
Setup 
Menu Description Play/Stop
Auto SourceSelect Auto Source for the monitor...

 
 
 
 
 
 
Information 
Menu Description
InformationShows a video source, display mode on the OSD screen.  
 
MENU ¡æ  ,  
 

 
 Check List
Before calling for assistance, check the information in this section to see if you can remedy any 
problems yourself. If you do ne ed assistance, please call the phone number on the Information section 
or contact your dealer . 
Symptom Check List Solutions
No images on the 
screen.  
I cannot turn on the 
monitor. Is the power cord 
connected properly?
Check the power cord connection and supply.
Can you see Check 
Signal Cable on the 
screen?  (Connected using the 
D-sub cable)  
Check the...

There is no image on the 
screen.  
Is the power indicator on 
the monitor blinking at 1 
second intervals?The monitor is in PowerSaver mode.  
 
Press a key on the keyboard to activate the 
monitor and restore the image on the screen.  
 
If there is still no image, press the SOURCE 
button.  
Then press any key on the keyboard again to 
activate the monitor and restore the image on 
the screen. 
Connected using the DVI 
cable?You may get a blank screen if you boot the 
system before you connect the DVI...

 
 
 
 
  monitor, Plug & Play 
(VESA DDC) monitor 
found. See the video card 
manual to see if the Plug 
& Play (VESA DDC) 
function can be 
supported. Install the monitor driver according to the 
Driver Installation Instructions.
Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when booting.  
(If it does, request an a service for the main board of the...

 
 
 
 
 
 
 
 
 
 
 
 Self-Test
Self-Test Feature Check  |  Warning Messages  |  Environment  |  Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is functioning 
properly. 
Self-Test Feature Check 
Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer. 
Turn on the monitor. 
If the monitor is functioning properly, you will see a box in the illustration below.  
 
  
 
This box appears during normal operation...

 
If there is no image on the screen or a Not Optimum Mode, Recommended Mode 1680 X 1050 60 
Hz message comes up, disconnect the cable from the computer while the monitor is still powered on.  
 
If there is a message coming up on the screen or if the screen goes white, this means the monitor 
is in working condition.  
In this case, check the computer for trouble. 
 

 Specifications
General
Model Name SyncMaster 206BW
LCD Panel
Size 20  Wide Diagonal (51 cm)
Display area 433.44 mm (H) x 270.9 mm (V)
Pixel Pitch 0.258 mm (H) x 0.258 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color
16.7M Colors
Resolution
Optimum resolution 1680 X 1050@60 Hz
Maximum resolution 1680 X 1050@60 Hz
Input Signal, Terminated
RGB Analog, DVI Compliant Digital RGB,  
0.7 Vp-p ± 5%, TTL level (V high ¡Ã
 2.0V, V low  ¡Â
 0.8V) 
Maximum Pixel Clock
146 MHz...

Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communicat ion equipment for residential use)
This product complies with the Electromagnetic Compatibility Directi ves for residential use and can be 
used in all areas including common residential areas. 
 
(Class B equipment emits less electr omagnetic waves than Class A equipment.)
 
 
 
 PowerSaver 
This monitor has a built-in power management system called PowerSav er. This system saves energy 
by...