Samsung Syncmaster 225uw Quick Start Guide

 
 
 
  
Menu Description
SOURCE Selects the Video signal while the OSD is off. (Analog/Digital) 
 
 
OSD Function 
Picture Brightness  Contrast
Color MagicColor  Color Tone  Color Control  Gamma
Image Coarse  Fine  Sharpness  H-Position  V-Position
OSD Language  H-Position  V-Position  Transparency  Display Time
Se tup Auto Source  Image Reset  Color Reset
Information
 
 
Picture 
 

 
 
 
 
 
Menu Description Play/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
MENU →  →  →  ,   → MENU
ContrastYou can use the on-screen menus to change the contrast 
according to personal preference.  
 
MENU →  →  ,   →  →  ,  → MENU
Color 
Menu Description Play/Stop
 

 
 
 
  MagicColor
 
MENU →  ,  → →  →  ,   → MENU
MagicColor is a new technology that Samsung has exclusively 
developed to improve digital image and to display natural color 
more clearly without disturbing image quality.  
 
 
Off Returns to the original mode.
Demo The screen before applying MagicColor appears 
on the right and the screen after applying 
MagicColor appears on the left. 
Full Displays not only vivid natural color but also 
more realistic natural skin color with clearness. 
Intelligent...

 
 
 
   
MENU →  ,   →  →  →  ,   → MENU
FineRemoves noise such as horizontal stripes.  
If the noise persists even after fine tuning, repeat it after 
adjusting the frequency (clock speed). 
(Available in analog mode only)  
 
MENU →  ,   →  →  ,   →  →  ,   → MENU
SharpnessChanges the clearance of image.  
 MENU →  ,   →  →  ,   →  →  ,   → MENU
H-PositionChanges the horizontal position of the monitors entire 
display. 
(Available in analog mode only)  
 
MENU →  ,   →  →  ,   →  →  ,   → MENU...

 
 
 
 
 
 
  V-Po sitionYou can change the vertical position where the OSD menu 
appears on your monitor.  
 
MENU →  ,   →  →  ,   →  →  ,   → MENU
TransparencyChange the transparency of the background of the OSD.  
 MENU →  ,   →  →  ,   →  →  ,   → MENU
Display TimeThe menu will be automatically turned off if no adjustments are 
made for a certain time period.  
You can set the amount of time the menu will wait before it is 
turned off.  
- 5 sec, 10 sec, 20 sec, 200 sec  
 
MENU →  ,   →  →  ,   →...

 
 
 
Menu Description
InformationShows a video source, display mode on the OSD screen.  
 
MENU →  ,  
 

 
 Check List
Before calling for service, check the information in this section to see if you can remedy any problems 
yourself. If you do need assistance, please call the  phone number on the Information section or contact 
your dealer . 
Symptom Check List Solutions
No images on the 
screen.  
I cannot turn on 
the monitor. Is the power cord 
connected 
properly?
Check the power cord connection and supply.
Can you see 
Check Signal 
Cable on the 
screen?  (Connected using the D-sub cable)  
Check the...

Is the power 
indicator on the 
monitor blinking at 1 
second intervals?Press a key on the keyboard to activate the monitor and 
restore the image on the screen.  
 
If there is still no image, press the    button.  
Then press any key on the keyboard again to activate the 
monitor and restore the image on the screen. 
Connected using 
the DVI cable?You may get a blank screen if you boot the system 
before you connect the DVI cable, or disconnect and then 
reconnect the DVI cable while the system is...

 
 
 
 
  There is a 
message that 
reads 
Unrecognized 
monitor, Plug & 
Play (VESA DDC) 
monitor found. Have you installed 
the monitor driver?Install the monitor driver according to the Driver 
Installation Instructions.
See the video card 
manual to see if the 
Plug & Play (VESA 
DDC) function can 
be supported. Install the monitor driver according to the Driver 
Installation Instructions.
Check when 
MagicTune™ does 
not function 
properly.MagicTune™ 
feature is found only 
on PC (VGA) with 
Window...

 
Windows ME/2000 :  
Set the resolution at the Control Panel →
 Display →
 Settings.   
 
Contact the video card manufacturer for details.
How can I set the Power 
Saving function?Windows XP :  
Set the resolution at the Control Panel →
 Appearance and Themes →
 
Display →
 Screen Saver.  
Set the function at BIOS-SETUP of the computer.  
 
Windows ME/2000 :  
Set the resolution at the Control Panel →
 Display →
 Screen Saver.   
Set the function at BIOS-SETUP of the computer.  
 
Refer to...