Samsung Syncmaster 2243sw User Manual

A: Windows XP:
Set the resolution 
in the Control Panel → Appearance and Themes  → Display → Screen
Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
A: Windows ME/2000: Set the resolution at the Control Panel  → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
Q: How can I clean the outer case/LCD Panel?
A: Disconnect the power cord and then clean the monitor with a soft cloth, using...

Warning Messages
If there is 
something wrong with the input signal, a message appears on the screen or the
screen goes blank although the power indicator LED is still on. The message may indicate
that the monitor is out of scan range or that you need to check the signal cable. Environment
The location  and 

the position of the monitor may influence the quality and other features of
the monitor.
If  there  are  any  sub  woofer  speakers  near  the  monitor,  unplug  and  relocate  the  woofer  to...

(Connected using the DVI cable)
If 
you  still 
see an error message on the screen when the monitor is connected properly,
check to see if the monitor status is set to analog.
If you still see an (error) message on the screen when the monitor is connected properly,
check to see if the monitor status is set to analog. Press ‘ /SOURCE’ button to have
the monitor double-check the input signal source.
Q: If the  power 

is on, reboot the computer to see the initial screen (the login screen), which
can be...

The screen shows strange colors or just black and white.
Q: Is the  screen 
displaying only one color as if looking at the screen through a cellophane
paper?
A: Check the signal cable connection.
A: Make sure the video card is fully inserted in its slot.
Q: Have  the  screen  colors  become  strange  after  running  a  program  or  due  to  a  crash between applications?
A: Reboot the computer.
Q: Has the video card been set properly?
A: Set the video card by referring to the video card manual.
The...

Set the resolution at the Control Panel 
→ Display → Settings.
Q: Has the video card been set properly?
A: Set the video card by referring to the video card manual.
There 
is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) mon-
itor found".
Q: Have you installed the monitor driver?
A: Install the monitor driver according to the Monitor Driver.
Q: See  the  video  card  manual  to  see  if  the  Plug  &  Play  (VESA  DDC)  function  can  besupported.
A: Install the monitor...

If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.
Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.
(Do not exceed 75 Hz when using the maximum resolution.)
If 
you  have 
problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter in the "Control Panel  → System → Device Administrator" and
then reboot the computer to reinstall the...

 Note
Before calling  for 
assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer. Troubleshooting
126
Downloaded from ManualMonitor.com Manual± 

Specifications
General
General
Model Name SyncMaster 943SW
LCD Panel
Size
18.5 inch (47 cm)
Display area 409.8 mm(H) X 230.4 mm(V)
Pixel Pitch
0.3 mm(H) X 0.3 mm(V)
Synchronization
Horizontal                   31 ~ 80 kHz Vertical                       56~ 75 Hz
Display Color
16.7M
Resolution
Optimum resolution
1360 X 768@60Hz
Maximum resolution 1360 X 768@60Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL...

Dimensions (W x H x D) / Weight (HAS Stand)
443.0 x 342.8 x 190.2 mm ( 17.4 x 13.5 x 7.5 inch) (With Stand)/ 4.85 kg (10.7 lbs)
VESA Mounting Interface
75.0 mm x 75.0 mm
Environmental considerations
Operating
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability This monitor can be installed on any Plug & Play compatible system. The interac-
tion  of  the 
monitor...

This  monitor  is  EPA  ENERGY  STAR
®
 compliant  and
ENERGY  2000  compliant  when  used  with  a  computer
equipped with VESA DPM functionality.
As an ENERGY STAR ®
 Partner, SAMSUNG has deter-
mined  that  this  product  meets  the  ENERGY  STAR ®
guidelines for energy efficiency. Preset Timing Modes
If the signal 

transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while...