Samsung Syncmaster 223bw Quick Start Guide

							 
 
 
 
 
monitor by searching new Hardware. 
MagicTune™ is an additional software for the monitor. 
Some graphic cards may not support your monitor. When 
you have a problem with the graphic card, visit our 
website to check the compatible graphic card list 
provided.  
http://www.samsung.com/monitor/magictune
 
MagicTune™ 
doesnt work 
properly. Have you changed 
your PC or video 
graphic card? Download the latest program. The program can be 
downloaded 
http://www.samsung.com/monitor/magictune  
Did you install the 
program? Reboot the computer after installing the program for the 
first time. If a copy of the program is already installed, 
remove it, reboot the computer, and then install the 
program again. You need to reboot the computer for it to 
operate normally after installing or removing the program. Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
Check if the power cord and the video cables are properly connected to the computer.
Check if the computer beeps more than 3 times when booting.  
(If it does, request an a service fo
r the main board of the computer.) 
If you installed a new video card or if you assembled the PC, check if the installed the adapter(video) 
driver and the monitor driver. 
Check if the scanning ratio of the video screen is set to between 56 Hz ~ 75 Hz.  
(Do not exceed 75 Hz when using the maximum resolution.)
If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove 
the Display Adapter in the Control Panel 
→ System 
→ Device Administrator and then reboot the 
computer to reinstall the adapter (video) driver. 
If problems repeatedly occur,  contact an authorized service center .
 Q & A
Question Answer 
How can I change the frequency? The frequency can be changed by reconfiguring the  video card.  
 
Note that video card support can vary, depending on 
the version of the driver used.  
(Refer to the computer or the video card manual for 
details.) 
How can I adjust the resolution? Windows XP :   Set the resolution in the Control Panel → 
Appearance and Themes  → Display 
→ Settings.  
 
Windows ME/2000 :  
Set the resolution in the Control Panel  → Display 
→ 
Settings.  
 
Contact the video card manufacturer for details.
How can I set the Power Saving function? Windows XP :   Set the resolution in the Control Panel → 
Appearance and Themes  → Display 
→ Screen 
Saver.  
Set the function in the BI OS-SETUP of the computer. 
 
 
 
						

							Windows ME/2000 :  
Set the resolution in the Control Panel → Display 
→ 
Screen Saver.  
Set the function in the BI OS-SETUP of the computer. 
 
 
Refer to the Windows/Computer Manual
How can I clean the outer case/LCD Panel? Disconnect the power cord and then clean the  monitor with a soft cloth, using either a cleaning 
solution or plain water.  
 
Do not leave any detergent or scratches on the case. 
Do not let any water enter the monitor.
 
 
 
 
 
 
 
 
 
 Self-Test
Self-Test Feature Check  |  Warning Messages   |  Environment   |  Useful Tips
Your monitor provides a self test feature that allows you to check whether your monitor is functioning 
properly. 
Self-Test Feature Check 
Turn off both your computer and the monitor.
Unplug the video cable from the back of the computer. 
Turn on the monitor. 
If the monitor is functioning properly, you will see a box in the illustration below.  
 
  
 
This box appears during normal operation if the video cable becomes disconnected or damaged.  
 
Turn off your monitor and reconnect the video cable; then turn on both your computer and the 
monitor. 
If your monitor screen remains blank after using the  previous procedure, check your video controller 
and computer system; your monitor is functioning properly.
Warning Messages 
If there is something wrong with the input signal, a message appears on the screen or the screen 
goes blank although the power indicator LED is still on. The message may indicate that the monitor is 
out of scan range or that you need to check the signal cable.  
 
 
Environment 
The location and the position of the monitor may influence the quality and other features of the 
monitor.  
 
						

							 
 
 
If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another 
room.  
Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet 
(one meter) of the monitor. 
Useful Tips 
A monitor recreates visual signals received from the computer. Therefore, if there is a problem with 
the computer or the video card, this can cause the monitor to become blank, have poor coloring, 
become noisy, and video mode not supported, etc. In this case, first check the source of the problem, 
and then contact the Service Center or your dealer.  
 
Judging the monitors working condition  
 
If there is no image on the screen or a Not Optimum Mode, Recommended Mode 1680 X 1050 60 
Hz message comes up, disconnect the cable from the computer while the monitor is still powered on.  
 
If there is a message coming up on the screen or if the screen goes white, this means the monitor 
is in working condition.  
In this case, check the computer for trouble. 
 
						

							 Specifications
General
Model Name  SyncMaster 223BW, 216BW
LCD Panel
Size 21.6  Wide Diagonal (55 cm)
Display area 494.94 mm (H) x 290.5875 mm (V)
Pixel Pitch 0.27675 mm (H) x 0.27675 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color
16.7M Colors
Resolution
Optimum resolution 1680 X 1050@60 Hz
Maximum resolution 1680 X 1050@60 Hz
Input Signal, Terminated
RGB Analog, DVI Compliant Digital RGB,  
0.7 Vp-p ± 5%, 
Separate H/V sync, Composite, SOG 
TTL level (V high  ≥ 2.0V, V low 
≤ 0.8V) 
Maximum Pixel Clock
146 MHz (Analog,Digital)
Power Supply
AC 100 - 240V~ (+/- 10%) ，50/60Hz ± 3 Hz
 
						

							 
 
 
 
Signal Cable
15pin to 15pin D-sub cable, Detachable  
DVI-D to DVI-D connector, Detachable (Option)
Dimensions (W x H x D) / Weight 
514.6 X 353.3 X 63.0 mm / 20.2 x 13.9 x 2.4 inch (Without Stand)  
514.6 X 422.0 X 219.3 mm / 20.2 x 16.6 x 8.6 inch (With Stand) / 6.0 kg / 13.2 lbs
VESA Mounting Interface
100 mm x 100 mm (for use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature : 50 °F ~ 104 °F (10 °C ~ 40 °C)  
Humidity : 10 % ~ 80 %, non-condensing
Storage Temperature : -4 °F ~113 °F (-20 °C ~ 45 °C)   Humidity : 5 % ~ 95 %, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and 
the computer systems will provide the best operating conditions and monitor settings. In most cases, the 
monitor installation will proceed automatically, un less the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm 
(one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color 
appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you 
can use it without any problelms. 
 
For example, the number of TFT  LCD sub pixels contained in this product are 5,292,000. Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can be 
used in all areas including common residential areas. 
 
(Class B equipment emits less electromagnetic waves than Class A equipment.)
 
 PowerSaver 
This monitor has a built-in power management system called PowerSaver. This system saves energy 
by switching your monitor to low-power mode when it has not been used for a certain amount of time. 
The monitor automatically returns to normal operation when you press a key on the keyboard. For 
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in 
your computer. Use the software utility installe d on your computer to set up this feature.
State Normal Operation Power saving mode Power off  
(Power button)  
EPA/ENERGY 2000
Power Indicator Blue Blue, Blinking Black
Power Consumption Less than 50 W Less than 1 W  Less than 1 W
 
						

							 
 (Off-mode) 
This monitor is EPA ENERGY STAR® compliant and ENERGY2000 
compliant when used with a computer equipped with VESA DPMS 
functionality.  
As an ENERGY STAR
® Partner, SAMSUNG has determined that this 
product meets the ENERGY STAR® guidelines for energy efficiency.
 
 
 
 
 Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the 
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while 
the power LED is on. Refer to the video card manual and adjust the screen as follows. 
Preset Timing Modes 
Display Mode Horizontal 
Frequency  
(kHz) Vertical 
Frequency  
(Hz) Pixel Clock  
(MHz) Sync Polarity  
(H/V)
IBM, 640 x 350  31,469  70,086  25,175  +/- 
IBM, 640 x 480  31,469  59,940  25,175  -/- 
IBM, 720 x 400  31,469  70,087  28,322  -/+ 
MAC, 640 x 480  35,000  66,667  30,240  -/- 
MAC, 832 x 624  49,726  74,551  57,284  -/- 
MAC, 1152 x 870  68,681  75,062  100,000 -/-  VESA, 640 x 480  37,500  75,000  31,500  -/- 
VESA, 640 x 480  37,861  72,809  31,500  -/- 
VESA, 800 x 600  35,156  56,250  36,000  +/+ 
VESA, 800 x 600  37,879  60,317  40,000  +/+ 
VESA, 800 x 600  46,875  75,000  49,500  +/+ 
VESA, 800 x 600  48,077  72,188  50,000  +/+ 
VESA, 1024 x 768  48,363  60,004  65,000  -/- 
VESA, 1024 x 768  56,476  70,069  75,000  -/- 
VESA, 1024 x 768  60,023  75,029  78,750  +/+ 
VESA, 1152 x 864  67,500  75,000  108,000  +/+  VESA,1280 x 960 60,000  60,000  108,000 +/+ 
VESA,1280 x 1024  79,976  75,025  135,000  +/+ 
VESA, 1680 X 1050  65,290  59,954  146,250  -/+ 
 
						

							Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the 
screen horizontally is called the Horizontal Cycle and the inverse number 
of the Horizontal Cycle is called the Horizontal Frequency. Unit : kHz 
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image many 
times per second to display an image to the user. The frequency of this 
repetition is called the Vertical Frequency or Refresh Rate. Unit : Hz
 
						

							 
 
 Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the 
SAMSUNG customer care center. 
North America
U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com 
CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca 
MEXICO 01-800-SAMSUNG (7267864) http://www.samsung.com/mx 
Latin America
ARGENTINE 0800-333-3733 http://www.samsung.com/ar 
BRAZIL 4004-0000 http://www.samsung.com/br 
CHILE 800-726-7864 (SAMSUNG) http://www.samsung.com/cl 
COLOMBIA 01-8000112112 http://www.samsung.com.co
COSTA RICA 0-800-507-7267 http://www.samsung.com/latin 
ECUADOR 1-800-10-7267 http://www.samsung.com/latin 
EL SALVADOR 800-6225 http://www.samsung.com/latin 
GUATEMALA 1-800-299-0013 http://www.samsung.com/latin 
JAMAICA 1-800-234-7267 http://www.samsung.com/latin 
PANAMA 800-7267 http://www.samsung.com/latin 
PUERTO RICO 1-800-682-3180 http://www.samsung.com/latin 
REP. DOMINICA 1-800-751-2676 http://www.samsung.com/latin 
TRINIDAD & 
TOBAGO 1-800-7267-864
http://www.samsung.com/latin 
VENEZUELA 0-800-100-5303 http://www.samsung.com/latin 
Europe
 
 
						

							BELGIUM 02 201 2418http://www.samsung.com/be 
CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz 
 
DENMARK 70 70 19 70 http://www.samsung.com/dk 
FINLAND 030-6227 515 http://www.samsung.com/fi 
FRANCE 3260 SAMSUNG(7267864) (€ 
0,15/min) http://www.sams
ung.com/fr 
GERMANY 01805 - 121213 (€ 0,14/Min) http://www.samsung.de 
HUNGARY 06-80-SAMSUNG (7267864) http://www.samsung.com/hu 
ITALIA 800 SAMSUNG (7267864) http://www.samsung.com/it 
LUXEMBURG 0032 (0)2 201 24 18 http://www.samsung.lu 
NETHERLANDS 0900 20 200 88 (€ 0,10/Min) http://www.samsung.com/nl 
NORWAY 815-56 480 http://www.samsung.com/no 
POLAND 0 801 801 881 http://www.samsung.com/pl 
PORTUGAL 80 8 200 128 http://www.samsung.com/pt 
REPUBLIC OF 
IRELAND 0818 717 100
http://www.samsung.com/uk 
SLOVAKIA 0800-SAMSUNG (7267864) http://www.samsung.com/sk 
SPAIN 902 10 11 30 http://www.samsung.com/es 
SWEDEN 0771-400 200 http://www.samsung.com/se 
SWITZERLAND 0800-7267864 http://www.samsung.com/ch
U.K 0870 SAMSUNG (7267864) http://www.samsung.com/uk 
CIS
ESTONIA 800-7267 http://www.samsung.ee
LATVIA 800-7267 http://www.samsung.com/lv
LITHUANIA 8-800-77777 http://www.samsung.lt
KAZAKHSTAN 8 800 080 1188 http://www.samsung.kz 
RUSSIA 8-800-200-0400 http://www.samsung.ru 
UKRAINE 8-800-502-0000 http://www.samsung.com/ur 
UZBEKISTAN 140-1234 http://www.samsung.uz
Asia Pacific
AUSTRALIA 1300 362 603 http://www.samsung.com/au 
CHINA 800-810-5858, 010- 6475 1880 http://www.samsung.com.cn 
HONG KONG 3698-4698 http://www.samsung.com/hk 
 
						

							INDIA 3030 8282, 1800 1100 11http://www.samsung.com/in 
INDONESIA 0800-112-8888 http://www.samsung.com/id 
JAPAN 0120-327-527 http://www.samsung.com/jp 
MALAYSIA 1800-88-9999 http://www.samsung.com/my 
PHILIPPINES 1800-10-SAMSUNG (7267864) http://www.samsung.com/ph 
SINGAPORE 1800-SAMSUNG (7267864) http://www.samsung.com/sg 
THAILAND 1800-29-3232, 02-689-3232 http://www.samsung.com/th 
TAIWAN 0800-329-999 http://www.samsung.com/tw 
VIETNAM 1 800 588 889 http://www.samsung.com/vn 
Middle East & Africa
SOUTH AFRICA 0860 7267864 (SAMSUNG) http://www.samsung.com/za 
U.A.E 800SAMSUNG (7267864) 
8000-4726 http://www.sams
ung.com/mea 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Terms
Dot Pitch
The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the 
resolution. The distance between two dots of the same color is called the Dot Pitch. Unit : mm
Vertical Frequency
The screen must be redrawn several times per second in order to create and display an image for the 
user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. 
Unit : Hz  
 
Example : If the same light repeats itself 60 times per second, this is regarded as 60 Hz. 
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of the screen horizontally is called 
the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. 
Unit : kHz
Interlace and Non-Interlace Methods
Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-
Interlace method while showing odd lines and then even lines in turn is called the Interlace method. 
The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace 
method is the same as that used in TVs.
Plug & Play
This is a function that provides the best quality screen for the user by allowing the computer and the 
monitor to exchange information automatically. Th is monitor follows the international standard VESA 
DDC for the Plug & Play function.
Resolution