Samsung Syncmaster 223bw Quick Start Guide

 
  
  
  
  
  
  
  
  
  
  
  
  
  
 
 
SyncMaster 223BW / 216BW
 
Install drivers Install programs
  
    
 
 
 

 Notation
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to the 
equipment.
 
 
 
ProhibitedImportant to read and understand at all times
Do not disassembleDisconnect the plug from the outlet 
Do not touchGround to prevent an electric shock 
 
 
 Power
When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to active screen mode.
The images here are for reference only, and are not applicable in all cases...

 
 
Do not pull the plug out by the wire nor touch the plug with wet hands.  
 
This may cause electric shock or fire.
 
 
Use only a properly grounded plug and receptacle.  
 
An improper ground may cause electric shock or equipment damage. (Class l 
Equipment only.) 
 
 
Insert the power plug firmly so that it does not come loose.  
 
A bad connection may cause fire. 
 
 
Do not bend the plug excessively and wire nor place heavy objects upon them, which 
could cause damage.  
 
This may cause electric...

This may cause electric shock or fire.
 
 
 Installation
  Be sure to contact  an authorized Service Center , when installing your monitor in a 
location with heavy dust, high or low temperatures, high humidity, and exposed to 
chemical substances and where it operates for 24 hours such as at airports, train 
stations etc. 
 
Failure to do so may cause serious damage to your monitor.
 
 
Place your monitor in a location with low humidity and a minimum of dust.  
 
Failure to do so may cause electric...

 Keep any heating devices away from the power cable.  
 
A melted coating may cause electric shock or fire.
 
 
Do not install the product in places with  poor ventilation, for instance, a bookshelf, 
closet, etc.  
 
Any increase in the internal temperature may cause fire.
 
 
Put down the monitor carefully.  
 
Failing to do so may damage the monitor.
 
 
Do not place the monitor face down.  
 
This may damage th e TFT-LCD surface. 
 
 
The installation of the bracket must be done by a qualified...

 Cleaning and Use 
  When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a 
slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly onto the monitor.  
 
This may cause damage, electric shock or fire. 
 
 
Use the recommended detergent with a smooth cloth. 
 
 
If the connector between the plug and the pin is dusty or dirty, clean it properly using 
a dry cloth.  
 
A dirty connector may cause electric shock or fire.
 
 
Make sure to unplug the power cord...

This may cause electric shock or fire.  
Refer to a qualified servicing company. 
 
 
If your monitor does not operate normally - in particular, if there is any unusual sound 
or smell coming from the monitor - unplug it immediately and  the Service Center.  
 
This may cause electric shock or fire. 
 
 
Keep the product away from places exposed to oil, smoke or moisture; do not install 
inside a vehicle.  
 
This may cause a malfunction, electric shock or fire.  
In particular, avoid operating the...

This may cause a malfunction, electric shock or fire.  
If a foreign substance enters the monitor, unplug the power cord and contact the 
Service Center. 
 
 
Keep the product away from combustible chemical sprays or inflammable 
substances.  
 
This may cause an explosion or fire.   
Never insert anything metallic into the monitor openings.  
 
This may cause electric shock, fire or injury. 
 
 
Do not insert metal objects such as chopst icks, wire and tools or inflammable objects 
such as paper or...

Dropping the product may cause damage to the product or the person carrying it. 
Using the product in a location prone to vibrations may shorten the lifetime of the 
product or may cause the product to catch fire.  
 
When moving the monitor, turn off and unplug the power cord. Make sure that all 
cables, including the antenna cable and cables connected to other devices, are 
disconnected before moving the monitor.  
 
Failure to disconnect cables may damage it and cause fire or electric shock.  
Place...

Correct Disposal of This Product  
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with 
separate collection systems)  
 
This marking shown on the product or its literature, indicates that it should not 
be disposed with other household wastes at the end of its working life. To 
prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it...