Home > Samsung > Monitor > Samsung Syncmaster 205bw Quick Start Guide

Samsung Syncmaster 205bw Quick Start Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Syncmaster 205bw Quick Start Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							    
     
     
     General 
    General
    Model NameSyncMaster 205BW
    LCD Panel
    Size20.1  Diagonal (51 cm)
    Display area433.44 mm (H) x 270.9 mm (V)
    Pixel Pitch0.258 mm (H) x 0.258 mm (V)
    Typea-si TFT active matrix
    Synchronization
    Horizontal30 ~ 81 k Hz
    Vertical56 ~ 75 Hz
    Display Color
    16.7 M Colors (8bit + RGB) 
    Resolution
    Optimum resolution1680 x 1050@60 Hz
    Maximum resolution1680 x 1050@60 Hz
    Input Signal, Terminated
    RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB  
    0.7Vp-p Positive at 75 Ω ±10%  
    Separate H/V sync, Composite sync,  SOG, TTL level positive or negative.
    Maximum Pixel Clock
    156 MHz
    Power Supply
    AC 100 to 240 Vac(+/- 10%), 60/50Hz ± 3 Hz
    Signal Cable
    15pin to 15pin D-sub cable, Detachable, 1.8 m 
    DVI-D to DVI-D connector, Detachable, 2.0 m (option)
    Power Consumption
     
    						
    							Less than 55 W 
    Dimensions (WxDxH)/ Weight 
    471.4 x 200.0 x 351.8 mm / 18.5 x 7.9 x 13.9 inch (with Basic Stand) / 6.8 kg / 15 lbs 
    471.4 x 69.5 x 307.9 mm / 18.5 x 2.7 x 12.1 inch (without Basic Stand)
    VESA Mounting Interface
    75 mm x 75 mm (for use with Spec ialty(Arm) Mounting hardware.)
    Environmental considerations
    OperatingTemperature: 50 °F ~ 104 °F (10 °C ~ 40 °C)  
    Humidity: 10% ~ 80%, non-condensing
    StorageTemperature: -4 °F ~113 °F (-20 °C ~ 45 °C)  
    Humidity: 5% ~ 95%, non-condensing
    Plug and Play Capability
    This monitor can be inst alled on any Plug & Play  compatible system. Intera ction of the monitor and 
    computer systems will provide the be st operating conditions and monitor settings. In most cases, 
    monitor installation will proceed automatically, unless the user wishes to select alternate settings.
    Dot Acceptable
    TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm 
    (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE 
    color seem to be bright sometimes or some of black pixels could be seen. This is not from bad 
    quality and you can use it without uneasiness. 
    zFor example, the number of TFT LCD sub pixels that  is contained in this product are 5,292,000.  
    Note: Design and specifications are subject to change without prior notice.
     
     
     
     PowerSaver  
    This monitor has a built-in po wer management system called PowerSaver. This system saves energy 
    by switching your monitor into a low-power mode when it has not been used for a certain amount of 
    time. The monitor automati cally returns to normal operation when you press a key on the keyboard. For 
    energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
    long periods. The PowerSaver syst em operates with a VESA DPMS co mpliant video card installed in 
    your computer. Use a software utility installed  on your computer to set up this feature. 
     
    State  Normal 
    Operation  Power saving 
    mode  
    Power off 
    EPA/ENERGY  2000 
    (Power button)   
    Power off 
    (Power Switch)   
    Power IndicatorBlueBlue, BlinkingBlackBlack
    Power 
    ConsumptionLess than  55 WLess than 2 W  
    (Off-mode)Less than 1 W 
    (120 Vac / 220 Vac)0 W
     
    This monitor is EPA ENERGY STAR® compliant and ENERGY2000 
    compliant when  used with a computer equipped with VESA DPMS 
    functionality. 
    As an ENERGY STAR
    ® Partner, SAMSUNG has determined that this 
    product meets the ENERGY STAR® guidelines for energy efficiency.
     
     
     
    						
    							   
       
     
    Preset Timing Modes 
    If the signal transferred from the computer is the same as the following Preset Timing Modes, the 
    screen will be adjusted automatically. However, if the signal differs, the screen may go blank while 
    the power LED is on. Refer to the video card manual and adjust the screen as follows.  
     
    Table 1. Preset Timing Modes 
    Display Mode
    Horizontal 
    Frequency 
    (kHz)Vertical 
    Frequency 
    (Hz) Pixel Clock 
    (MHz) Sync Polarity 
    (H/V)
    IBM, 640 x 350  31.469  70.086  25.175  +/- 
    IBM, 640 x 480 31.469 59.940 25.175 -/- 
    IBM, 720 x 400  31.469  70.087  28.322  -/+ 
    MAC, 640 x 480 35.000 66.667 30.240 -/- 
    MAC, 832 x 624  49.726  74.551  57.284  -/- 
    MAC, 1152 x 870 68.681 75.062 100.00 -/- 
    VESA, 640 x 480  37.500 75.000 31.500  -/- 
    VESA, 640 x 480 37.861 72.809 31.500 -/- 
    VESA, 800 x 600  35.156 56.250 36.000  -/- 
    VESA, 800 x 600 37.879 60.317 40.000 +/+ 
    VESA, 800 x 600  46.875 75.000 49.500 +/+ 
    VESA, 800 x 600 48.077 72.188 50.000 +/+ 
    VESA, 1024 x 768  48.363 60.004 65.000  -/- 
    VESA, 1024 x 768 56.476 70.069 75.000 -/- 
    VESA, 1024 x 768  60.023 75.029 78.750 +/+ 
    VESA, 1152 x 864 67.500 75.000 108.00 +/+ 
    VESA, 1280 x 1024  60.000 60.000 108.00 +/+ 
    VESA, 1280 x 1024 79.976 75.025 135.00 +/+ 
    VESA, 1680 x 105065.29059.954146.25-/-
    Horizontal Frequency
    The time to scan one line connecting the right edge to the left edge of 
    the screen horizontally is called Horizontal Cycle and the inverse 
    number of the Horizontal Cycle is called Horizontal Frequency. Unit: 
    kHz  
     
    Vertical Frequency
    Like a fluorescent lamp, the screen has to repeat the same image 
    many times per second to display an image to the user. The 
    frequency of this repetition is called Vertical Frequency or Refresh 
    Rate. Unit: Hz
     
    						
    							    
     
     
     Contact SAMSUNG WORLD-WIDE 
     
    If you have any questions or comments relating to Samsung products, please 
    contact the SAMSUNG customer care center.   
     
     
    North America  
    CANADA 1-800-SAMSUNG (7267864)
    http://www.samsung.com/ca
    MEXICO01-800-SAMSUNG (7267864)http://www.samsung.com/mx
    U.S.A 1-800-SAMSUNG (7267864)http://www.samsung.com
     
     
    Latin America  
    ARGENTINE 0800-333-3733
    http://www.samsung.com/ar
    BRAZIL0800-124-421http://www.samsung.com/br
    CHILE 800-726-7864 (SAMSUNG)http://www.samsung.com/cl
    COSTA RICA0-800-507-7267http://www.samsung.com/latin
    ECUADOR 1-800-10-7267http://www.samsung.com/latin
    EL SALVADOR800-6225http://www.samsung.com/latin
    GUATEMALA 1-800-299-0013http://www.samsung.com/latin
    JAMAICA1-800-234-7267http://www.samsung.com/latin
    PANAMA 800-7267http://www.samsung.com/latin
    PUERTO RICO1-800-682-3180http://www.samsung.com/latin
    REP. DOMINICA 1-800-751-2676http://www.samsung.com/latin
    TRINIDAD & TOBAGO1-800-7267-864http://www.samsung.com/latin
    VENEZUELA 1-800-100-5303http://www.samsung.com/latin
     
     
    Europe  
    BELGIUM 02 201 2418
    http://www.samsung.com/be
     
    						
    							CZECH REPUBLIC844 000 844http://www.samsung.com/cz
    DENMARK 38 322 887http://www.samsung.com/dk
    FINLAND09 693 79 554http://www.samsung.com/fi
    FRANCE 08 25 08 65 65 (€ 0,15/min)http://www.samsung.com/fr
    GERMANY01805 - 121213 (€ 0,12/Min)http://www.samsung.de
    HUNGARY 06 40 985 985http://www.samsung.com/hu
    ITALIA199 153 153http://www.samsung.com/it
    LUXEMBURG 02 261 03 710http://www.samsung.lu
    NETHERLANDS0900 20 200 88 (€ 0.10/Min)http://www.samsung.com/nl
    NORWAY 231 627 22http://www.samsung.com/no
    POLAND0 801 801 881http://www.samsung.com/pl
    PORTUGAL 80 8 200 128http://www.samsung.com/pt
    SLOVAKIA0850 123 989http://www.samsung.com/sk
    SPAIN 902 10 11 30http://www.samsung.com/es
    SWEDEN08 585 367 87http://www.samsung.com/se
    U.K 0870 242 0303http://www.samsung.com/uk
     
     
    CIS 
    RUSSIA 8-800-200-0400http://www.samsung.ru
    UKRAINE8-800-502-0000http://www.samsung.com/ur
     
     
    Asia Pacific 
    AUSTRALIA 1300 362 603 http://www.samsung.com/au
    CHINA800-810-5858, 010- 6475 1880http://www.samsung.com.cn
    HONG KONG 2862 6001http://www.samsung.com/hk
    INDIA3030 8282, 1600 1100 11http://www.samsung.com/in
    INDONESIA 0800-112-8888http://www.samsung.com/id
    JAPAN0120-327-527http://www.samsung.com/jp
    MALAYSIA 1800-88-9999http://www.samsung.com/my
    PHILIPPINES1800-10-SAMSUNG (7267864)http://www.samsung.com/ph
    SINGAPORE 1800-SAMSUNG (7267864)http://www.samsung.com/sg
    THAILAND1800-29-3232, 02-689-3232http://www.samsung.com/th
    TAIWAN 0800-329-999http://www.samsung.com/tw
    VIETNAM1 800 588 889http://www.samsung.com/vn
     
     
    Middle East & Africa 
    SOUTH AFRICA 0860 7267864 (SAMSUNG)http://www.samsung.com/za
    U.A.E800SAMSUNG (7267864)http://www.samsung.com/mea
     
    						
    							 
     
     Terms 
     
    Dot Pitch 
    The image on a monitor is composed of red, green and blue dots. The closer the dots, the 
    higher the resolution. The distance between two dots of the same color is called the Dot 
    Pitch. Unit: mm 
     
     
    Vertical Frequency 
    The screen must be redrawn several times per second in order to create and display an image 
    for the user. The frequency of this repetition per second is called Vertical Frequency or 
    Refresh Rate. Unit: Hz  
       
    Example : If the same light repeats itself 60 times per second, this is regarded as 60 Hz. 
    Horizontal Frequency 
    The time to scan one line connecting the right edge to the left edge of the screen horizontally 
    is called Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal 
    Frequency. Unit: kHz 
     
     
    Interlace and Non-Interlace Methods 
    Showing the horizontal lines of the screen from the top to the bottom in order is called the 
    Non-Interlace method while showing odd lines and then even lines in turn is called the 
    Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a 
    clear image. The Interlace method is the same as that used in TVs. 
     
     
    Plug & Play  
    This is a function that provides the best quality screen for the user by allowing the computer 
    and the monitor to exchange information automatically. This monitor follows the international 
    standard VESA DDC for the Plug & Play function. 
     
     
    Resolution 
    The number of horizontal and vertical dots used to compose the screen image is called 
    resolution. This number shows the accuracy of the display. High resolution is good for 
    performing multiple tasks as more image information can be shown on the screen.  
     
    Example : If the resolution is 1680 x 1050 , this means the screen is composed of 1680 
    horizontal dots (horizontal resolution) and 1050 vertical lines (vertical resolution).
     
     
     For Better Display 
     
    1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described 
    below to enjoy the best quality of picture. You can have an uneven quality of picture in the 
    screen if the best quality of picture is not provided in TFT-LCD.  
     
    {Resolution: 1680 x 1050  
    {Vertical frequency (refresh rate): 60 Hz 
     
    2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of 
    1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE 
    and WHITE color seem to be bright sometimes or some of black pixels could be seen. 
    This is not from bad quality and you can use it without uneasiness. 
     
    {For example, the number of TFT LCD sub pixels that is contained in this product are 
    5,292,000.  
     
    3. When you clean the monitor and the panel outside, please apply the recommended small 
    amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but 
    to be scrubbed out softly. 
    If excessive force is applied, you can have a stain on it. 
     
     
    						
    							4. If you are not satisfied with the quality of picture, you can get better quality of picture by executing auto adjustment function in display screen that is appeared as window 
    termination button is pressed. 
    If theres still noise after automatic adjust ment, use FINE/COARSE adjustment function.  
     
    5. If you view a fixed screen for an extended period of time, residual image or blurriness may  appear. 
    Change the mode to energy save or set a screensaver to moving picture when you need to 
    be away from the monitor for an extended period of time.  
     
     
     
      
      
      
      
     
     
    Authority 
      Information in this document is 
    subject to change without notice. 
    © 2006 Samsung Electronics Co., Ltd. All rights reserved.  
    Reproduction in any manner whatsoever without the written permission of Samsung Electronics 
    Co., Ltd. is strictly forbidden. 
    Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or 
    consequential damages in connection with the furnishing, performance, or use of this material. 
    Samsung  is the registered trademark of Samsung Electronics Co., Ltd.;  Microsoft, Windows  and 
    Windows NT  are registered trademarks of Microsoft Corporation;  VESA, DPMS and  DDC are 
    registered trademarks of Video Elec tronics Standard Association; the ENERGY STAR® name and 
    logo are registered trademarks of the U.S. Enviro nmental Protection Agency (EPA). As an 
    ENERGY STAR® Partner, Samsung  Electronics Co., Ltd. has determined that this product meets 
    the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein 
    may be the trademarks or registered trademarks of their respective owners. 
    Class B  
    This device is a Class B digital apparatus. For Safety and EMC compliance guide, you may refer to 
    Regulatory Guide. 
     
    MÉXICO
    IMPORTADO POR:SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V. 
    Vía Lopez Portillo No. 6, Col. San Fco. Chilpan 
    Tultitlán, Estado de México, C.P. 54940 
    Tel: 01-55-5747-5100 / 01-800-726-7864 
     
    EXPORTADO POR:Samsung Electronics CO.,LTD. 
    416, Mae tan-3dong, Yeongtong - gu, 
    Suwon City, Gyeonggi-do Korea
     
    						
    							PRODUCT INFORMATION (Image Retention Free) 
     
    LCD Monitors and TVs may have image retention when switching from one image to another 
    especially after displaying a stationary image for a long time.  
    This guide is to demonstrate correct usage of LCD products in order to protect them from Image 
    retention.  
     
    WarrantyWarranty does not cover any damage caused by image retention.  
    Burn-in is not covered by the warranty. 
    What is Image retention ? 
    During normal operation of a LCD panel, pixel image retention doesnt occur. However, 
    if the same image is displayed for a long time, a slight difference in electric charge 
    accumulates between the two electrodes which encase the liquid crystal. This may 
    cause the liquid crystal to build up in a certain areas of the display. Thus, the previous 
    image is retained when switching to a new video image. All display products, including 
    LCD,are subject to image retention. This is not a product defect.  
    Please follow the suggestions below to protect your LCD from image retention 
    Power Off, Screen Saver, or Power Save Mode 
    Ex) 
    zTurn the power off when using a stationary pattern. 
    zUse a Screen saver if possible 
    zSet the Monitor to power off with the PC Display Properties Power Scheme.  
     - Turn the power off for 4 hours after 24 hours in use 
    - Turn the power off for 2 hours after 12 hours in use  
    - Screen saver in one color or a moving image is recommended. 
    Suggestions for specific applications 
    Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems  
    We recommend that you follow set up of your display system program as below: 
     
     
    Display Information together with Logo or Moving image cycle. 
    Ex) Cycle : Display Information for 1 hour followed by a  
    Display Logo or moving image for 1 minute.  
     
    Change the Color Information periodically (Use 2 different colors).
    Ex) Rotate the Color Information with 2 colors every 30 minutes.  
     
    Avoid using a combination of characters and background color with large 
    difference in luminance. 
    Avoid using Grey colors, which can cause Image retention easily.  
     
    zAvoid: Colors with big difference in luminance (Black & White, Grey)  
    Ex)  
     
     
    zRecommended settings: Bright colors with little difference in luminance  
    - Change the characters color and background color every 30 minutes  
    Ex) 
     
     
    - Every 30 minutes, change the characters with movement.  
     
    						
    							Ex)
    The best way to protect your monitor from Image retention is to set your PC or 
    S
    ystem to operate a Screen Saver program when you are not using it.
    Image retention may not occur when a LCD panel is operated under normal conditions. 
     
    Normal conditions are defined as continuously changing video patterns. When the LCD 
    panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be 
    slight difference in voltage between electrodes that work the liquid crystal (LC) in a 
    pixel. The voltage difference between electrodes increases with time, forcing the liquid 
    crystal to lean. When this occurs, the previous image may be seen when the pattern is 
    changed.  
    To prevent this, the accumulated voltage difference must be decreased. 
     
    Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II 
     
    						
    							Correct Disposal of This Product 
    (Waste Electrical & Electronic Equipment) - Europe only 
    (Applicable in the European Union and other European countries with 
    separate collection systems) 
     
    This marking shown on the product or its literature, indicates that it should not 
    be disposed with other household wastes at the end of its working life. To 
    prevent possible harm to the environment or human health from uncontrolled 
    waste disposal, please separate this from other types of wastes and recycle it 
    responsibly to promote the sustainable reuse of material resources. 
     
    Household users should contact either the retailer where they purchased this 
    product, or their local government office, for details of where and how they 
    can take this item for environmentally safe recycling.  
     
    Business users should contact their supplier and check the terms and 
    conditions of the purchase contract. This product should not be mixed with 
    other commercial wastes for disposal. 
     
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Syncmaster 205bw Quick Start Guide