Samsung Syncmaster 205bw Quick Start Guide

							    
 
 
1. [ ]Use this button to open the on-screen menu and exit from the menu screen or close screen 
adjustment menu. 
2. [ ]This button allows you to adjust items in the menu.
3. [ ]Press this button to activate a highlighted menu item.
4. [
AUTO ]Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are 
adjusted automatically.
 
 AUTO 
 
						

							MenuDescription
AUTO When the 
AUTO button is pressed, the Auto Adjustment screen appears 
as shown in the animated screen on the center. 
Auto adjustment allows the monitor to self-adjust to the incoming video 
signal. The values of fine, coarse and position are adjusted automatically.  
(Available in analog mode only) 
 
To make the automatic adjustment function sharper, execute the AUTO 
function while the AUTO PATTERN is on. 
 
- If auto adjustment does not work properly, press AUTO button again to 
adjust picture with more accuracy. 
 
- If you change resolution in the control panel, auto function will be 
executed automatically. 
 
 
 Locked 
 
 
						

							MenuDescription
LockedAfter pushing the MENU button more than 5 seconds, OSD function is 
locked (unlocked). You can adjust only the brightness and contrast of the 
monitor with the OSD adjustment locking feature.
 
 MagicBright™ 
 
MenuDescription
 MagicBright™Push the MagicBright button to circle through available preconfigured 
modes. 
- Six different modes (Custom/Text/Internet/Game/Sport/Movie) 
 
 
 Brightness 
 
						

							MenuDescription
 BrightnessWhen OSD is not on the screen, push the button to adjust brightness.
 
 
 SOURCE 
 
MenuDescription
SOURCESelects the video signal while the OSD is off. 
 
 
 
						

							  Picture Brightness Contrast
  Color MagicColor Color Tone Color Control Gamma
  Image Coarse Fine Sharpness H-Position V-Position
  OSD Language H-Position V-Position Transparency Display Time
  Setup Auto Source Image Reset Color Reset
  Information
 Picture  
MenuDescriptionPlay/Stop
BrightnessYou can use the on-screen menus to change the 
brightness according to personal preference.  
 
Direct Access Feature : When OSD is not on the screen, 
push the button to adjust brightness.  
 
[MENU 
¡æ  
¡æ  
¡æ ,  
¡æ MENU]
Contrast
You can use the on-screen menus to change the contrast 
according to personal preference.  
 
[MENU 
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
 
 
 
 Color  
 
						

							MenuDescriptionPlay/Stop
MagicColor
 
[MENU 
¡æ ,  
¡æ  
¡æ  
¡æ ,  
¡æ MENU]
MagicColor is a new technology that Samsung has 
exclusively developed to improve digital image and to 
display natural color more clearly without disturbing image 
quality. 
 
1) Off - Returns to the original mode.
2) Demo - The screen before applying MagicColor 
appears on the right and the screen after applying 
MagicColor appears on the left.
3) Full - Displays not only vivid natural color but also 
more realistic natural skin color with clearness.
4) Intelligent - Displays vivid natural color with clearness.
 
Color Tone
The tone of the color can be changed and one of four 
modes can be selected - Cool, Normal, Warm and 
Custom.  
 
[MENU ¡æ ,  ¡æ  ¡æ ,  ¡æ  ¡æ ,  ¡æ MENU]
Color ControlAdjusts individual R,G,B color balance. 
 [MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
Gamma
Gamma correction changes the luminance of the colors 
with intermediate luminance. 
zMode 1  
zMode 2  
zMode 3  
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
 
 
 
 
 Image  
 
						

							MenuDescriptionPlay/Stop
CoarseRemoves noise such as vertical stripes. Coarse 
adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
(Available in analog mode only) 
 
[MENU 
¡æ ,  
¡æ  
¡æ  
¡æ ,  
¡æ MENU]
Fine 
Removes noise such as horizontal stripes. If the noise 
persists even after fine tuning, repeat it after adjusting the 
frequency (clock speed). 
(Available in analog mode only) 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
SharpnessChanges the clearance of image. 
 [MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
H-Position
Changes the horizontal position of the monitors entire 
display. 
(Available in analog mode only) 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
V-PositionChanges the vertical position of the monitors entire 
display. 
(Available in analog mode only) 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
 
 
 
 
 OSD  
 
						

							MenuDescriptionPlay/Stop
LanguageYou can choose one of 9 languages. 
 
Note:The language chosen affects only the language of 
the OSD. It has no effect on any software running on the 
computer. 
 
[MENU 
¡æ ,  
¡æ  
¡æ  
¡æ ,  
¡æ MENU]
H-Position
You can change the horizontal position where the OSD 
menu appears on your monitor. 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
V-PositionYou can change the vertical position where the OSD menu 
appears on your monitor. 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
TransparencyChange the transparency of the background of the OSD. 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
Display TimeThe menu will be automatically turned off if no adjustments 
are made for a certain time period.  
You can set the amount of time the menu will wait before it 
is turned off. 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
 
 
 
 
 Setup  
 
						

							MenuDescriptionPlay/Stop
Auto SourceSelect 
Auto Source for the monitor to automatically select 
the signal source. 
 
[MENU 
¡æ ,  
¡æ  
¡æ  
¡æ ,  
¡æ MENU]
Image Reset
Image parameters are replaced with the factory default 
values. 
 
[MENU 
¡æ ,  
¡æ  
¡æ ,  
¡æ  
¡æ ,  
¡æ MENU]
Color ResetColor parameters are replaced with the factory default 
values. 
 
[MENU ¡æ ,  ¡æ  ¡æ ,  ¡æ  ¡æ ,  ¡æ MENU]
 
 
 
 
 Information  
 
						

							MenuDescription
InformationShows a video source, display mode on the OSD screen.  
 [MENU 
¡æ ,  
¡æ MENU]