Samsung Syncmaster 204bm Quick Start Guide

							 
 Installation  
1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicRotation installation file.  
3. Select installation Language, Click Next.  
4. When the InstallShield Wizard window appears, click Next.  
5. Select I accept the terms of the license agreement to accept the terms of use.  
6. Choose a folder to install the MagicRotation program.  
7. Click Install.  
8. The Setup Status window appears.  
9. Click Finish. Have to reboot the system in order for the MagicRotation to work properly.  
10. When the installation is complete, the MagicRotation executable icon appears on your 
desktop.  
 
 
  Installation Problems  
The installation of MagicRotation can be affected by the factors such as video card, 
motherboard and the network environment.  
 Limitation 
1. The Display Driver should be properly lo aded for the MagicRotation to work properly. 
The installed Display Driver should be the latest driver supplied by the vendor.  
 
2. If some applications like Windows Media Player, Real Player, etc. are not displaying  movie files properly in 90, 180 and 270 orientations then do the following : 
{Close the application.  {Select the Orientation (90, 180, 270) you want to view the application.  {Relaunch the application.  
In most cases this should fix the problem.  
 
3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the  orientation mode selected (90, 180, 270). 
e.g. 3D games  
 
4. DOS based applications in Full Screen Mode will not function as per the orientation mode  selected (90, 180, 270).  
 
5. Dual is not supported in Windows® 98, ME, NT 4.0.    
6. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).  
7. If you are changing your Graphic Card it is recommended that you uninstall the  MagicRotation Software before doing so.  
 
 System Requirements 
OS 
zWindows 98 SE  zWindows Me  
 
 
 
						

							zWindows NT 4.0  zWindows 2000  zWindows XP Home Edition  zWindows XP Professional 
Hardware  
z128MB Memory above(recommended)  z25MB Free Hard disk space above  
Service Packs  
zIt is recommended that your System has the latest Service Pack installed.  zFor Windows® NT 4.0, it is recommended to install Internet Explorer 5.0 and above with 
Active Desktop component.  
          
* For more information, visit the MagicRotation  website.  
* Windows® is registered trademark of Microsoft Corporation,Inc. 
 
 Uninstall 
The MagicRotation program can be removed only by using the Add/Remove Programs option 
of the Windows Control Panel.  
Perform the following steps to remove MagicRotation.  1. Go to [Task Tray]  [Start]  [Settings] and select [Control Panel] in the menu.   If the program runs on Windows® XP, go to [Control Panel] in the [Start] menu.  
 
2. Click the Add/Remove Programs icon in Control Panel.    
3. In the Add/Remove Programs screen, scroll down to find MagicRotation   Click on it to highlight it.  
 
4. Click the Change/Remove button to remove the program.    
5. Click Yes to begin the uninstall process.    
6. Wait until the Uninstall Complete dialog box appears.    
7. After uninstall restart the system to complete the uninstallation.  
Visit the MagicRotation  website for technical support for MagicRotation, FAQs (questions and 
answers) and software upgrades. 
* Windows® is registered trademark of Microsoft Corporation,Inc. 
 
						

							 
 
Before calling for assistance, check the information in this section to see if you can remedy 
any problems yourself. If you do need assistance, please call the phone number on the 
Information section or contact your dealer .
 
 
Symptom Check List Solutions
No images on 
the screen. I 
cannot turn on 
the monitor. Is the power cord 
connected properly?
Check the power cord connection 
and supply.
Can you see  Check 
Signal Cable  on the 
screen?  (When connecting D-Sub cable)
 
Check the signal cable connection.   
(When connecting DVI cable)  
If you still see an error message on 
the screen when the monitor is 
connected properly, check to see if 
the monitor status is set to analog.  
Press  (Enter/Source)  button to 
have the monitor double-check the 
input signal source.
If the power is on, reboot 
the computer to see the 
initial screen(the login 
screen), which can be 
seen.  If the initial screen (the login screen) 
appears, boot the computer in the 
applicable mode (the safe mode for 
Windows ME/XP/2000) and then 
change the frequency of the video 
card. 
(Refer to the 
Preset Timing Modes ) 
Note: If the initial screen (the login 
screen) does not appear,  contact 
the Service Center or your dealer .  
Can you see  Not 
Optimum 
Mode,Recommended 
Mode 1600 X 1200 60 
Hz  on the screen?  You can see this message when the 
signal from the video card exceeds 
the maximum resolution and 
frequency that the monitor can 
handle properly.  
 
Adjust the maximum resolution and 
frequency that the monitor can 
handle properly.  
 
If the display exceeds SXGA or 60 
Hz, a 
Not Optimum 
Mode,Recommended Mode 
1600 X 1200 60 Hz   message is 
displayed. If the display exceeds 85 
 
						

							Hz,, the display will work properly 
but the Not Optimum 
Mode,Recommended Mode 
1600 X 1200 60 Hz  message 
appears for one minute and then 
disappears.  
Please change to the recommended 
mode during this one-minute period. 
 
(The message is displayed again if 
the system is rebooted.) 
There is no image on the 
screen.  
Is the power indicator on 
the monitor blinking at 1 
second intervals? The monitor is in PowerSaver mode. 
 
press a key on the keyboard to 
activate the monitor and restore the 
image on the screen.  
 
If there is still no image, press the 
(Enter/Source)  button.  
Then press any key on the keyboard 
again to activate the monitor and 
restore the image on the screen.
Is the monitor connected 
using the DVI cable? You may get a blank screen if you 
boot the system before you connect 
the DVI cable, or disconnect and 
then reconnect the DVI cable while 
the system is running as certain 
types of graphic cards do not send 
out video signals. 
Connect the DVI cable and then 
reboot the system.
I cannot see 
the On Screen 
Display. Have you locked the On 
Screen Display (OSD) 
Menu to prevent changes?
Unlock the OSD by pressing the [ ] button for at 
least 5 seconds.
The screen 
shows strange 
colors or just 
black and 
white.Is the screen displaying 
only one color as if looking 
at the screen through a 
cellophane paper? 
Check the signal cable connection. 
Make sure the video card is fully 
inserted in its slot.
Have the screen colors 
become strange after 
running a program or due 
to a crash between 
applications? Reboot the computer.
Has the video card been 
set properly? Set the video card by referring to the 
video card manual. 
The screen 
suddenly has 
become 
unbalanced. Have you changed the 
video card or the driver?
Adjust screen image position and 
size using the OSD.
Have you adjusted the 
resolution or frequency to 
the monitor? Adjust the resolution and frequency 
at the video card.  
(Refer to the 
Preset Timing Modes ).
The screen can be unbalanced due to the cycle of the video card signals. Readjust 
Position by referring to the OSD.
The screen is 
out of focus or 
OSD cannot be 
adjusted. Have you adjusted the 
resolution or frequency on 
the monitor?
Adjust the resolution and frequency 
of the video card. 
(Refer to the 
Preset Timing Modes ).
LED is blinking 
but no images 
on the screen. Is the frequency properly 
adjusted when checking 
the Display Timing on the 
menu? Adjust the frequency properly by 
referring to the video card manual 
and the 
Preset Timing Modes .  
(The maximum frequency per 
resolution may differ from product to 
product.) 
 
						

							 
There are only 
16 colors 
shown on the 
screen. 
The screen 
colors have 
changed after 
changing the 
video card.Have the Windows colors 
been set properly? 
Windows ME/2000/XP: 
Set the colors properly at the 
Control Panel 
→
 Display  →
 
Settings . 
Has the video card been 
set properly? Set the video card by referring to the 
video card manual. 
There is a 
message that 
reads 
Unrecognized 
monitor, Plug & 
Play (VESA 
DDC) monitor 
found.  Have you installed the 
monitor driver?
Install the monitor driver according 
to the 
Driver Installation Instructions .
See the video card 
manual to see if the Plug 
& Play (VESA DDC) 
function can be supported.  Install the monitor driver according 
to the 
Driver Installation Instructions .
Problems 
related to 
Audio  No sound  Ensure that the audio cable is firmly 
connected to both the audio-in port 
on your monitor and the audio-out 
port on your sound card.  
(Refer to Connecting the Monitor )  
 
Check the volume level. 
Sound level is too low.  Check the volume level.    
If the volume is still too low after 
turning the control to its maximum, 
check the volume control on the 
computer sound card or software 
program.
Check when 
MagicTune™ 
does not 
function 
properly.  MagicTune™ feature is 
found only on PC (VGA) 
with Window OS that 
supports Plug and Play.
* To check whether your PC is 
available for MagicTune™ feature, 
follow the  
  steps below (When Windows is 
XP);  
 
Control Panel -> Performance and 
Maintenance -> System -> 
Hardware -> Device Manager -> 
Monitors -> After deleting Plug and 
Play monitor, find Plug and Play 
monitor by searching new 
Hardware. 
MagicTune™ is an additional 
software for the monitor. Some 
graphic cards may not support your 
monitor. When you have a problem 
with the graphic card, visit our 
website to check the compatible 
graphic card list provided. 
http://www.samsung.com/monitor/magictune
MagicTune™ 
doesnt work 
properly. Have you changed your 
PC or video graphic card?
Download the latest program. The 
program can be downloaded 
http://www.samsung.com/monitor/magictune
.
  Did you install the  program? Reboot the computer after installing the program for 
the first time. If a copy of the program is already 
installed, remove it, reboot the computer, and then 
install the program again. You need to reboot the 
computer for it to operate normally after installing or 
removing the program. 
Visit our website and download the installation software for MagicTune™ MAC.
 
 
 
						

							 
 Check the following items if there is trouble with the monitor. 
1. Check if the power cord and the video cables are properly connected to the computer.  
2. Check if the computer beeps more than 3 times when booting.  (If it does, request an a service for the main board of the computer.)  
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.  
4. Check if the scanning ratio of the video screen is set to between 56Hz ~ 75Hz.   (Do not exceed 75Hz when using the maximum resolution.)  
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,  remove the Display Adapter in the  Control Panel→
System →
Device Administrator  and then 
reboot the computer to reinstall the adapter (video) driver.  
 
 If problems repeatedly occur,  contact an authorized Service Center .
 
 
 Q & A 
Question Answer  
How can I change the 
frequency? The frequency can be changed by reconfiguring the video card.  
 
Note that video card support can vary, depending on the version 
of the driver used. (Refer to the computer or the video card 
manual for details.) 
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution in the Control  Panel→Display
→Settings.  
 
* Contact the video card manufacturer for details.
How can I set the Power Saving 
function? Windows ME/XP/2000 : Set the function in the BIOS-SETUP of 
the computer or the screen saver. (Refer to the Windows / 
Computer Manual). 
How can I clean the outer 
case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft 
cloth, using either a cleaning solution or plain water.  
 
Do not leave any detergent or scratches on the case. Do not let 
any water enter the monitor. 
 
 
 Self-Test Feature Check 
Self-Test Feature Check   |  Warning Messages   |  Environment   |  Useful Tips
 
Your monitor provides a self test feature that allows you to check whether your monitor is 
functioning properly.  
 
 
 
   Self-Test Feature Check 
 
1. Turn off both your computer and the monitor.  
2. Unplug the video cable from the back of the computer.  
3. Turn on the monitor.  
If the monitor is functioning properly, you will see a box in the illustration below.  
 
 
 
						

							 
This box appears during normal operation if the video cable becomes disconnected or 
damaged. 
 
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the  monitor.  
If your monitor screen remains blank after using the previous procedure, check your video 
controller and computer system; your monitor is functioning properly. 
  
 Warning Messages  
  If there is something wrong with the input signal, the message below appears on the screen 
or the screen goes blank although the power indicator LED is still on. The message may 
indicate that the monitor is out of scan range or that you need to check the signal cable. 
 
  
 Environment  
 
The location and the position of the monitor may influence the quality and other 
features of the monitor. 
1. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer  to another room.  
2. Remove all electronic devices such as radios, fans, clocks and telephones that are  within 3 feet (one meter) of the monitor.  
  
 Useful Tips 
 
zA monitor recreates visual signals received from the computer. Therefore, if there is a problem 
with the computer or the video card, this can cause the monitor to become blank, have poor 
coloring, become noisy, and video mode not supported, etc. In this case, first check the source of 
the problem, and then contact the Service Center or your dealer.  
 
zJudging the monitors working condition   
If there is no image on the screen or a  Not Optimum Mode,Recommended Mode 1600 X 
1200 60 Hz   message comes up, disconnect the cable from the computer while the monitor is 
still powered on. 
{If there is a message coming up on the screen or if the screen goes white, this means the 
monitor is in working condition.  
{In this case, check the computer for trouble.  
 
						

							 
 
 General 
General
Model Name SyncMaster 204BM
LCD Panel
Size 20 inch (51 cm)
Display area 408.0 mm (H) x 306.0 mm (V)
Pixel Pitch 0.255 mm (H) x 0.255 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical 56 ~ 75 Hz
Display Color
16.7M
Resolution
Optimum resolution 1600x1200@60 Hz
Maximum resolution 1600x1200@60 Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 
0.7 Vp-p ±5 % 
Separate H/V sync, Composite sync, SOG(Option), TTL (V high  ≥ 2.0V, V low 
≤ 0.8V)
Maximum Pixel Clock
165 MHz
Power Supply
AC 100 - 240 V~ (+/- 10 %) ，50/60 Hz 
Signal Cable
15pin-to-15pin D-sub cable, Detachable 
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD)/ Weight 
444 x 362 x 74.5 mm / 17.5 x 14.3 x 2.9 inch (Without Stand)  
 
						

							444 x 411.3 x 200.8 mm / 17.5 x 16.2 x 7.9 inch (With Stand) / 5.6 kg / 12.3 lbs 
VESA Mounting Interface
100 mm x 100 mm (For use with Specialty(Arm) Mounting hardware.)
Environmental considerations
Operating Temperature: 50°F ~ 104°F (10°C ~ 40°C)  Humidity: 10 % ~ 80 %, non-condensing
Storage Temperature: -4°F ~113°F (-20°C ~ 45°C)   Humidity: 5 % ~ 95 %, non-condensing
Speaker
1 W X 2
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor 
and the computer systems will provide the best operating conditions and monitor settings. In most 
cases, the monitor installation will proceed automatically, unless the user wishes to select alternate 
settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm 
(one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE 
color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality 
and you can use it without any problelms.  
 
zFor example, the number of TFT LCD sub pixels contained in this product are 5,760,000. 
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can 
be used in all areas including common residential areas.  
 
(Class B equipment emits less electromagnetic waves than Class A equipment.)
 
 
 
 PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves energy 
by switching your monitor to low-power mode when it has not been used for a certain amount of time. 
The monitor automatically returns to normal operation when you press a key on the keyboard. For 
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in 
your computer. Use the software utility installed on your computer to set up this feature. 
 
State  
Normal Operation  
Power saving mode  Power off  
EPA/ENERGY 2000 
Power Indicator Blue Blue, Blinking off
Power Consumption Less than 45 watts Less than 1 watts  Less than 1 watts
 
This monitor is EPA ENERGY STAR® compliant and ENERGY2000 
compliant when used with a computer equipped with VESA DPM 
functionality. 
As an ENERGY STAR
® Partner, SAMSUNG has determined that this 
product meets the ENERGY STAR® guidelines for energy efficiency.
 
						

							   
 
 
 
 
 
Preset Timing Modes 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the 
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while 
the power LED is on. Refer to the video card manual and adjust the screen as follows.  
 
Table 1. Preset Timing Modes 
Display Mode Horizontal 
Frequency  (kHz) Vertical 
Frequency  (Hz)  Pixel Clock 
(MHz)  Sync Polarity 
(H/V)
MAC,640X480 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
VESA, 640 x 480 37.861 72.809 31.500 -/-
VESA, 640 x 480 37.500 75.000 31.500 -/-
VESA, 800 x 600 35.156 56.250 36.000 +/+
VESA, 800 x 600 37.879 60.317 40.000 +/+
VESA, 800 x 600 48.077 72.188 50.000 +/+
VESA, 800 x 600 46.875 75.000 49.500 +/+
VESA, 1024 x 768 48.363 60.004 65.000 -/-
VESA, 1024 x 768 56.476 70.069 75.000 -/-
VESA, 1024 x 768 60.023 75.029 78.750 +/+
VESA, 1152 x 864 67.500 75.000 108.000 +/+
VESA, 1280 x 960 60.000 60.000 108.000 +/+
VESA, 1280 x 1024 79.976 75.025 135.000 +/+
VESA,1600 x 1200  75.000 60.000 162.000 +/+
Horizontal Frequency
The time to scan one line connecting the right edge to the left edge of 
the screen horizontally is called the Horizontal Cycle and the inverse 
number of the Horizontal Cycle is called the Horizontal Frequency. 
Unit: kHz  
 
Vertical Frequency
Like a fluorescent lamp, the screen has to repeat the same image 
many times per second to display an image to the user. The 
frequency of this repetition is called the Vertical Frequency or Refresh 
Rate. Unit: Hz