Samsung Syncmaster 2032mw Quick Start Guide

 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer.  
Contact a local deale
rto buy optional items.
 
 
 
 Unpacking 
Without Stand With Stand
 
 
   Manual  
 
 
Quick Setup Guide Warranty Card (Not available in all locations)Users Guide, Monitor Driver 
 
 
     Cable
   
 

D-Sub Cable Audio Cable Power Cord 
 
 
  
 
 Other
 
 
Remote Control  Batteries (AAA X 2) Cleaning Cloth 
 
  
 
 Sold separately
   
TV Antenna Cable  (Coaxial Cable) RCA Cable (Video-Yellow, 
Audio-Red and White)Component(PR, PB, Y) Cable 
 
  
S-VIDEO Cable  Earphones/Headphones SCART Cable 
 
 
DVI Cable 
DVI to HDMI cable HDMI Cable 
 
RCA to stereo (for PC) cable 
 
 
 
 
 
 
 

 
 
    
Front 
1.  
SOURCE
2.  
MENU
3.  
VOL / - +
4.  
CH / - +
5. 
 
Remote Control 
Sensor
6. 
 
[   ] Power button / 
Power indicato
r
7.  
Speaker ;
 
 1. 
SOURCE 
Activates a highlighted menu item.  
Press the SOURCE button to change the input signal source.  
Changing the source is allowed only in external devices that are connected to the monitor 
at the time.  
To switch Screen modes:  
[PC] 
→ [DVI] 
→ [TV] 
→ [Ext.] 
→ [AV] 
→ [S-Video] 
→ [Component] 
→ [HDMI]  
>>Click here to see an...

 (The configuration at the back of the monitor may vary from product to product.)  
  
1. POWER  
 
 
 
zPower terminal 
Connect the power cord for your monitor to the 
POWER on the back of the monitor. 
This product may be used with 100 ~ 240VAC(+/- 
10%).  
 
 
2. DVI/PC IN / HDMI/PC/DVI-D AUDIO IN  
 
 
 
1.
PC 
: Connect the signal cable to the PC port on the 
back of your monitor. 
 
2.
DVI-D  
: Connect the DVI cable to the DVI-D port on the 
back of your monitor.  
 
3.
HDMI/PC/DVI-D AUDIO IN 
:...

  
 
zConnect the CATV cable or TV antenna cable to the 
ANT IN port on the rear side of the monitor. Make 
sure to use a TV antenna cable (sold separately) as 
the antenna cable.  
 
5. HDMI IN 
 
 
 
zConnect the HDMI IN terminal at the back of your 
monitor to the HDMI terminal of your digital output 
device using a HDMI cable.  
6. EXT(RGB) 
 
 
 
zConnect the EXT (RGB) port of the monitor to the 
DVD Player using a SCART jack. 
 
As for EXT(RGB) port of the monitor, it makes TV or 
Video signal...

 
   
 
connection terminal.  
 
 
See Connecting the monitor for further information regarding cable connections. 
 
 
 
 Remote Control 
 
The performance of the remote control may be affected by a TV or other electronic device operated near 
the monitor, causing malfunction due to interference with frequency.  
 
 
 
1.
 
POWER 
2. Number button 
3. -/--
4.
5.  MENU
6.
 MUTE 
7. Up-Down Left-Right buttons 
8.  ENTER
9. 
INFO 
10. 
SOURCE 
11.
 PRE-CH 
12.  P   
13.
 
EXIT 
14. P.MODE, M/B...

1.  POWER Turns the monitor On/Off. 
 
2. Number button 
Selects TV channels in the TV mode.  
Used to change channels when PIP is selected and the PIP SOURCE is set to TV.  
 
3. -
/-- 
(One/Two-Digit channel selection) 
Use to select a channel numbered ten or over.  
Press this button, and the -- symbol is displayed.  
Enter the two-digit channel number. 
 
4.   
Adjusts the audio volume. 
 
5.  MENU  
Opens the on-screen menu and exits from the menu or closes the adjustment menu. 
 
6.  MUTE 
Press to...

- PC/ DVI mode : Wide / 4:3 
- TV / Ext. / AV / S-Video mode : Auto Wide / Wide / 16:9 / Zoom1 / Zoom2 / 4:3 
- Component / HDMI mode : Wide / 16:9 / Zoom1 / Zoom2 / 4:3 
 
18.SOURCE - Ad
justable when the PIP function is ON.
Selects the Video SOURCE.  
 
19. TTX/MIX  
TV channels provide written information services via teletext.  
zTeletext buttons 
 
For more information > TTX / MIX  
 
20. DUAL I-II  
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be 
operated depending on...

 
 
Connecting the monitor  
1.Connecting to a Computer 
1. Connect the power cord for your monitor to the POWER on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.
2. Use appropriate connection for your computer.  2-1. Using the D-sub (Analog) connector on the video card.  Connect the signal cable to the  PC port on the back of your monitor. 
  [PC]   
2-2. Using the DVI (Digital) connector on the video card. 
Connect the DVI cable to the  DVI-D port on the back of your...

 
1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the D-SUB port on the Macintosh computer. 
 
[PC]  
 
2. Turn on the monitor and Macintosh.  
 
 
 
Connecting to Other devices 
This monitor allows the user to connect it to such input devices as a DVD player, a VCR or 
camcorder, or a DTV or TV without disconnecting the PC.  
The configuration at the back of the monitor may vary from product to product.  
 
1. Connecting AV Devices / Connecting Headphone 
The...