Samsung Syncmaster 2032mw Quick Start Guide

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
   
    
 
  
Install Drive
r
 
 
   
   
  
          
SyncMaster 932MW/2032MW
 

 
 
 Notational 
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to the 
equipment.  
 
 
 
Prohibited Important to read and understand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Ground to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for extended period of time, set your computer to DPMS.  
If using a screen saver, set it to active screen mode.  
 
   The images here are for reference only, and are...

 
 Do not use a damaged or loose plug. 
zThis may cause electric shock or fire.  
 
 
 
  Do not pull the plug out by the wire nor touch the plug with wet hands. 
zThis may cause electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage. (Class l 
Equipment only.)  
 
 
 
  Insert the power plug firmly so that it does not come loose. 
zA bad connection may cause fire.  
 
 
 
  
  Do not excessively bend the plug...

 
 
 
  Installation  
  Be sure to contact an authorized Service Center, when installing your monitor in a 
location with heavy dust, high or low temperatures, high humidity, and exposed to 
chemical substances and where it operates for 24 hours such as at airports, train 
stations etc. 
zFailure to do so may cause serious damage to your monitor. 
 
 
Place your monitor in a location with low humidity and a minimum of dust. 
zFailure to do so may cause electric shock or fire inside the monitor.  
 
 
Do...

bookshelf, closet, etc. 
zAny increase in the internal temperature may cause fire.  
 
 
Put down the monitor carefully. 
zFailing to do so may damage the monitor.  
 
 
Do not place the monitor face down. 
zThis may damage the TFT-LCD surface.  
 
 
The installation of the bracket must be done by a qualified professional. 
zInstalling the bracket by unqualified personnel may result in injury.  zAlways use the mounting device specified in the owners manual.  
 
 
When installing the product, make sure to...

 
  Clean  
  
When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a 
slightly moistened, soft fabric. 
 
 
Do not spray water or detergent directly onto the monitor. 
zThis may cause damage, electric shock or fire.  
 
 
Use the recommended detergent with a smooth cloth.  
 
 
If the connector between the plug and the pin is dusty or dirty, clean it properly 
using a dry cloth. 
zA dirty connector may cause electric shock or fire.  
 
 
Make sure to unplug the power cord...

If your monitor does not operate normally - in particular, if there is any unusual 
sound or smell coming from the monitor - unplug it immediately and contact an 
authorized dealer or the Service Center.  
zThis may cause electric shock or fire.  
 
 
Keep the product away from places exposed to oil, smoke or moisture; do not 
install inside a vehicle. 
zThis may cause a malfunction, electric shock or fire.  zIn particular, avoid operating the monitor near water or outdoors where the 
monitor could be...

Never insert anything metallic into the monitor openings.  
zThis may cause electric shock, fire or injury.  
 
Do not insert metal objects such as chopsticks, wire and tools or inflammable 
objects such as paper or matches into the vent, headphone port or AV ports or 
etc. 
zThis may cause electric shock or fire. If an alien substances or water enters the 
product, turn the product off, unplug the power connector from the wall outlet 
and contact the Service Center.  
 
 
When viewing a fixed screen for...

 
Place the product out of childrens reach, as they could damage by hanging 
onto it. 
zA falling product may cause injury to the person or even fatality.  
 
 
When not using the product for an extended period of time, keep the product 
unplugged. 
zOtherwise, this may cause heat emission from the accumulated dirt or 
degraded insulation, causing electric shock or fire.  
 
 
Do not place your childrens favorite toys or any other objects of interest on 
the product. 
zChildren may try to climb on the...

height so that the top of the monitor is slightly below eye level. 
  
zAdjust the monitor angle so that there is no reflected light on the 
screen.Try to maintain your arms perpendicular to your armpits. 
 
zKeep your arms level with the back of your hands. 
 
zKeep the angle of the elbow perpendicular. 
  
zKeep the angle of the knees at more than 90 degree. Do not let 
your feet fall up from the floor. Adjust the arm position so that it 
is below the heart.