Samsung Syncmaster 152v Quick Start Guide

							English > Main > Setup > Connecting Your Monitor      
Connecting 
Your Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
 1. Connect the DC Adapter for your monitor to the power port on the back of\
 the monitor.   Plug the power cord for the monitor into a nearby outlet. 
2. Connect the signal cable to the 15-pin, D-sub connector on the back of y\
our monitor. 
3. Connect the monitor to the Macintosh computer using the D-SUB connection\
 cable. 
4. In the case of an old model Macintosh, you need to connect the monitor u\
sing a special Mac  adaptor. 
5. Turn on your computer and monitor. If your monitor displays an image, in\
stallation is complete. 
SyncMaster 153S/173S
 
						

							English > Main > Setup > Connecting Your Monitor      
Connecting 
Your Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 1. Connect the power cord for your monitor to the power port on the back of\
 the monitor.   Plug the power cord for the monitor into a nearby outlet. 
2. Connect the signal cable to the 15-pin, D-sub connector on the back of y\
our monitor. 
3. Connect the audio cable for your monitor to the audio port on the back o\
f your computer. 
4. Connect the monitor to the Macintosh computer using the D-SUB connection\
 cable. 
5. In the case of an old model Macintosh, you need to connect the monitor u\
sing a special Mac  adaptor. 
6. Turn on your computer and monitor. If your monitor displays an image, in\
stallation is complete. 
 
1. PC sound connection terminal (Input)   
2.Headphone connection terminal (Output)  
3.Volume  
4.To listen in privacy,connect headphones here.  
5.Connect a sound cable from the input source (sound card,computer,CD-ROM drive).  
SyncMaster 153B/173B
 
						

							Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
 
When prompted by the operating system  for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different fr\
om one operating 
system to another. Follow the directions as appropriate for the operatin\
g system you 
have.  
 
Prepare a blank disk and download the driver program file at the Interne\
t web site shown 
here. 
zInternet web site : http://www.samsung-monitor.com/  (Worldwide)
http://www.samsungusa.com/monitor/  (USA)
http://www.sec.co.kr/monitor/  (Korea)
http://www.samsungmonitor.com.cn/  (China)
Windows ME
1. Insert CD into the CD-ROM drive.  
2. Click  Windows ME Driver . 
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
4. Click the  Install button in the  Warning window. 
 
 
5. Monitor driver installation is completed.  
Windows XP/2000
1. Insert CD into the CD-ROM drive.  
2. Click  Windows XP/2000 Driver . 
3. Choose your monitor model in the model list, then click the  OK button. 
 
						

							 
 
4. Click the Install button in the Warning window. 
 
 
5. If you can see following Message window, then click the Continue Anyway button. 
Then click OK button. 
 
 
This monitor driver is under certifying MS logo,and this installation dont damage your 
system.The certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/.  
6. Monitor driver installation is completed.  
 
						

							Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different fr\
om one operating 
system to another. Follow the directions as appropriate for the operatin\
g system you 
have.  
 
Prepare a blank disk and download the driver program file at the Interne\
t web site shown 
here. 
zInternet web site : http://www.samsung-monitor.com/  (Worldwide)
http://www.samsungusa.com/monitor/  (USA)
http://www.sec.co.kr/monitor/  (Korea)
http://www.samsungmonitor.com.cn/  (China)
Microsoft® Windows® XP Operating System
1. Insert CD into the CD-ROM driver.  
2. Click  Start —>  Control Panel  then click the  Appearance and Themes  Icon. 
     
 
3. Click  Display icon and choose the  Settings tab then click  Advanced... 
     
 
4. Click the  Properties button on the  Monitor tab and select  Driver tab. 
 
						

							     
 
5. Click Update Driver.. and select Install from a list or.. then click Next button. 
     
 
6. Select Dont search ,I will.. then click Next and then click Have disk. 
     
7. Click the Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the Next button. 
     
 
8. If you can see following Message window, then click the Continue Anyway button. Then 
click OK button. 
 
 
 
						

							 
This monitor driver is under certifying MS logo,and this installation do\
nt damage your 
system.The certified driver will be posted on Samsung Monitor Homepage  \
http://www.samsung-monitor.com/.  
9. Click the  Close button then click  OK button continually. 
 
 
     
 
10. Monitor driver installation is completed.  
Microsoft® Windows® 2000 Operating System
When you can see Digital Signature Not Found on your monitor, follow t\
hese steps.
1. Choose  OK button on the  Insert disk window.  
2. Click the  Browse button on the  File Needed window.  
3. Choose A:(D:\Driver) then click the Open button and then click  OK button.  
How to install
1. Click  Start , Setting  , Control Panel .  
2. Double click the  Display Icon.  
3. Choose the  Settings tab and then click  Advanced...  
4. Choose  Monitor. 
5. Click  Driver and then click on  Update Driver.. then click on the Next button.  
6. Choose  Display a list of the known drivers for this device so that I can choose\
 a 
specific driver  then click Next and then click  Have disk.  
7. Click the  Browse button then choose A:(D:\Driver).  
8. Click the  Open button, then click  OK button.  
9. Choose your monitor model and click the  Next button then click  Next button.  
10. Click the  Finish button then the  Close button.  
If you can see the  Digital Signature Not Found  window then click the Yesbutton. 
And click the  Finish button then the  Close button. 
Case1: If the Properties button is inactive, it means your monitor is properl\
y configured. 
Please stop installation 
Case2: If the Properties button is active, click the Properties button then\
 follow next 
steps continually.
Microsoft® Windows® Millennium Operating System
1. Click  Start , Setting  , Control Panel .  
2. Double click  Display icon.  
3. Select the  Settings tab and click  Advanced Properties  button.  
 
						

							4. Select the Monitor tab.  
5. Click the  Change button in the  Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location..  then click Next button.  
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you 
connected to your computer and click  OK.  
11. Continue choosing  Close button and  OK button until you close the Display Properties 
dialogue box.  
(You can get some other screen for warning message or others, then clic\
k the appreciate 
option for your monitor.)  
Microsoft® Windows® NT Operating System
1. Click  Start, Settings , Control Panel , and then double-click  Display icon.  
2. In Display Registration Information window, click Settings Tab and then \
click  All Display 
Modes .  
3. Select a mode that you wish to use (Resolution, Number of colors and Ve\
rtical frequency) 
and then click  OK.  
4. Click  Apply button if you see the screen working normally after clicking Test. If t\
he screen 
is not normal, change to a different mode (lower mode of resolution, co\
lors or frequency).  
Note : If there is no Mode at  All Display Modes, select the level of resolution and vertical 
frequency by referring to the  Preset Display Modes in the user guide.
Linux Operating System
To execute X-Window, you need to make the X86Config file, which is a typ\
e of system setting 
file.  1. Press Enter at the first and the second screen after executing the X86Co\
nfig file.  
2. The third screen is for  setting your mouse.  
3. Set a mouse for your computer.  
4. The next screen is for  selecting a keyboard.  
5. Set a Keyboard for your computer.  
6. The next screen is for  setting your monitor.  
7. First of all, set a  horizontal frequency  for your monitor. (You can enter the frequency 
directly.)  
8. Set a  vertical frequency  for your monitor. (You can enter the frequency directly.)  
9. Enter the  model name of your monitor . This information will not affect the actual 
execution of X-Window.  
10. You have  finished setting up your monitor.  
Execute  X-Window after setting other requested hardware.  
 
						

							Align the Mounting Interface Pad with the holes in the Rear Cover Mounti\
ng Pad and secure it with 
the four screws that came with the arm-type base, wall mount hanger or o\
ther base.
 
						

							Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant 
mounting 
Removing the base
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the screen.  
3. Remove the two screws and then remove the Stand from the LCD monitor.  
Attaching a base
NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interfa\
ce pad.
 
1. Rear cover mounting pad  
2. Mounting interface pad  
Align the Mounting Interface Pad with the holes in the Rear Cover Mounti\
ng Pad and secure it with 
the four screws that came with the arm-type base, wall mount hanger or o\
ther base.
SyncMaster 153S/173S