Samsung Syncmaster 152v Quick Start Guide

							Unpacking
Front 
Rear  
 
  Monitor and Stand  
 
 
Please make sure the following items are included 
with your monitor. If any items are missing,  
contact your dealer .
 
  
Power Cord
 Signal Cable
 Quick Setup Guide
 Warranty Card   
(Not available in all locations)
 Users Guide and Driver Installation CD
SyncMaster 153V/173V/152V/172V/193V/192V
 
						

							Unpacking
Front 
Rear  
 
  Monitor and Pivot Stand  
 
 
Please make sure the following items are included 
with your monitor. If any items are missing,  
contact your dealer .
 
  
Power Cord
  DC-Adapter
 Signal Cable
 Quick Setup Guide
 Warranty Card   
(Not available in all locations)
 Users Guide and Driver Installation CD
 Pivot S/W CD(Option)
SyncMaster 153S/173S
 
						

							Unpacking
Front 
Rear  
 
  Monitor and Stand  
 
 
Please make sure the following items are included 
with your monitor. If any items are missing,  
contact your dealer .
 
  
Power Cord
  DC-Adapter
 Signal Cable
 Audio Cable
 Quick Setup Guide
 Warranty Card   
(Not available in all locations)
 Users Guide and Driver Installation CD
 Pivot S/W CD(Option)
SyncMaster 153B/173B
 
						

							Unpacking
Front 
Rear 
 
1. Auto button /  Exit button Use this button to auto adjustment direct access. /  
Use this button to Exit the active menu or the OSD.
2. Menu button These buttons allow you to highlight and adjust items in the menu.
3. Power button Use this button to turn the monitor on and off.
4. Adjust buttons These buttons allow you to highlight and adjust items in the menu.
a. Power indicator
This light glows green during normal operation, and blinks green once as\
 
the monitor saves your adjustments.
 
Note : See  PowerSaver  described in the manual for further information regarding power saving \
functions. For energy conservation, turn your monitor OFF when it is not\
 needed, or when leaving it 
unattended for long periods.
SyncMaster 153V/173V/152V/172V/193V/192V
 
						

							Unpacking
Front 
Rear 
 
1. Auto button /  Exit button Use this button to auto adjustment direct access. /  
Use this button to Exit the active menu or the OSD.
2. Menu button These buttons allow you to highlight and adjust items in the menu.
3. Power button Use this button to turn the monitor on and off.
4. Adjust buttons These buttons allow you to highlight and adjust items in the menu.
a. Power indicator
This light glows green during normal operation, and blinks green once as\
 
the monitor saves your adjustments.
 
Note : See  PowerSaver  described in the manual for further information regarding power saving \
functions. For energy conservation, turn your monitor OFF when it is not\
 needed, or when leaving it 
unattended for long periods.
SyncMaster 153S/173S
 
						

							Unpacking
Front 
Rear 
 
1. Auto button /  Exit button Use this button to auto adjustment direct access. /  
Use this button to Exit the active menu or the OSD.
2. Menu button These buttons allow you to highlight and adjust items in the menu.
3. Power button Use this button to turn the monitor on and off.
4. Adjust buttons These buttons allow you to highlight and adjust items in the menu. 
When OSD is not on the screen, push the - or + button to adjust volume.
a. Power indicator
This light glows green during normal operation, and blinks green once as\
 
the monitor saves your adjustments.
b. PC sound connection  terminal
Connect the audio cable for your monitor to the audio port on the back o\
f 
your computer.
c. Headphone  connection terminal 
 
Note : See  PowerSaver  described in the manual for further information regarding power saving \
functions. For energy conservation, turn your monitor OFF when it is not\
 needed, or when leaving it 
unattended for long periods.
SyncMaster 153B/173B
 
						

							Unpacking
Front 
Rear 
 
 
 
(The configuration at the back of the monitor may vary from product to \
product.)  
1. Power portConnect the power cord for your monitor to the power port on the back 
of the monitor.
2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of 
your monitor.
 
Note:  
See 
Connecting Your Monitor  for further information regarding cable connections.
SyncMaster 153V/173V/152V/172V/193V/192V
 
						

							Unpacking
Front 
Rear 
 
 
 
(The configuration at the back of the monitor may vary from product to \
product.)  
1. Power portConnect the DC Adapter for your monitor to the power port on the back 
of the monitor. 
2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of 
your monitor.
3. Pin Press the button on the bottom rear of the stand in order to lock down 
the stand. 
Note : Always have your monitor faced front side down on a level 
surface (not resting on the stand) before locking it down. Pressing th\
e 
button while the monitor stand is resting on a flat surface may cause 
your monitor to topple or fall and cause personal injury and/or damage 
to the unit.
 
Note:  
See 
Connecting Your Monitor  for further information regarding cable connections.
SyncMaster 153S/173S
 
						

							Unpacking
Front 
Rear 
 
 
 
(The configuration at the back of the monitor may vary from product to \
product.)  
1. Power portConnect the power cord for your monitor to the power port on the back 
of the monitor.
2. Signal port Connect the signal cable to the 15-pin, D-sub connector on the back of 
your monitor. 
3. Pin Press the button on the bottom rear of the stand in order to lock down 
the stand. 
Note : Always have your monitor faced front side down on a level 
surface (not resting on the stand) before locking it down. Pressing th\
e 
button while the monitor stand is resting on a flat surface may cause 
your monitor to topple or fall and cause personal injury and/or damage 
to the unit.
 
Note:  
See 
Connecting Your Monitor  for further information regarding cable connections. 
SyncMaster 153B/173B
 
						

							English > Main > Setup > Connecting Your Monitor      
Connecting 
Your Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
 1. Connect the power cord for your monitor to the power port on the back of\
 the monitor.   Plug the power cord for the monitor into a nearby outlet. 
2. Connect the signal cable to the 15-pin, D-sub connector on the back of y\
our monitor. 
3. Connect the monitor to the Macintosh computer using the D-SUB connection\
 cable. 
4. In the case of an old model Macintosh, you need to connect the monitor u\
sing a special Mac  adaptor. 
5. Turn on your computer and monitor. If your monitor displays an image, in\
stallation is complete. 
SyncMaster 153V/173V/152V/172V/193V/192V