Samsung Sp H710ae User Manual
Have a look at the manual Samsung Sp H710ae User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Overscan Used to display raw input signals from 480p, 576p, 720p, 1080i HD sources or scale to fit to 1280 x 720 resolution after cutting out certain boundaries using software scaling. Picture Adjustment Overscan 41 1 MENU 2, 3, 4 Select 2, 3, 4 …/† 5 EXIT Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Picture. The Picturemenu is displayed. Press the button. 2 Press the or button to move to Overscan, then press the button.3 Press the EXITbutton to exit the menu.5 Press the or button to move to On, then press the button. Setup is switched to the selected mode.4 PicturePicture Mode : Movie 1√Custom Picture√Picture Size : Full√Position√DNIe : Off√Film Mode : On √Overscan : On√ MoveEnter Return Picture Picture Mode : Movie 1√Custom Picture√Picture Size : Full√Position√DNIe : Off√Film Mode : On √Overscan : On√ Move Enter Return Off On Downloaded From projector-manual.com Samsung Manuals
Still Picture Used to pause playback to see a still picture. Picture Adjustment Still Picture 42 Press the STILLbutton. Each press of the button pauses and resumes play back. One Touch Downloaded From projector-manual.com Samsung Manuals
VISUAL REALISM Setup Flipping/Reversal of Projected Image....44 Light Setting................................................45 Correcting Vertical Keystone....................46 Test Patterns..............................................47 Restoring the Factory Default Settings....48 Information..................................................49 Downloaded From projector-manual.com Samsung Manuals
Flipping/Reversing the Projected Image To support positioning of the projector, horizontal/vertical flipping and picture reversal are available. Setup Flipping/Reversing the Projected Image 44 Press the INSTALLbutton. The screen will flip over horizontally or vertically with each press of the button. NOTE This function is used to set up reversed image projection for ceiling installation. To install projector, refer to page 14. One Touch 1 MENU 3, 4 Select 2, 4 …/† 5 EXIT Front-FloorNormal Image Front-CeilingHorizontally Reversed Image Rear-FloorVertically Reversed Image Rear-CeilingHorizontal/Vertical Reversed Image Install Menu Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Setup. The Setupmenu is displayed.2 Press the button again. Press the or button to move to desired mode, then press the button. Setup is switched to the selected mode. 4 Press the EXITbutton to exit the menu.5 Press the button. Installis selected.3 Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√MoveEnter Return Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√Move Enter Return Front-Floor Front-Ceiling Rear-Floor Rear-Ceiling Front-Floor Rear-Floor Front-Ceiling Rear-Ceiling Downloaded From projector-manual.com Samsung Manuals
Setup Light Setting 45 1 MENU 2, 3, 4 Select 2, 3, 4 …/† 5 EXIT Light Setting Used to set the image brightness by adjusting the amount of light generated by the lamp. TheaterUsed to reduce the brightness of the lamp in dark ambient light to prevent reflection in the eye. It also lowers power consumption and extends the life of the lamp. BrightUsed to enhance the brightness in relatively bright ambient light. Light Setting Mode Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Setup. The Setupmenu is displayed. Press the button. 2 Press the EXITbutton to exit the menu.5 Press the or button to move to Light Setting , then press the button. The Light Settingmenu is displayed.3 Press the or button to move to desired mode, then press the button. Setup is switched to the selected mode.4 Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√MoveEnter Return Light Setting Theater√Bright√ MoveEnter Return Downloaded From projector-manual.com Samsung Manuals
Correcting Vertical Keystone Used to compensate image shape when image distortion occurs. Setup Correcting V-Keystone 46 Press the V.KEYSTONEbutton. Press the œor √button to adjust picture image optimally. One Touch 1 MENU 2, 3 Select 2, 3 …/†/œ/√ 4 EXIT NOTE V-Keystone corrects distortion of picture image by software. It is better to install the projector properly to avoid distortion instead of using the V-Keystone feature. Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Setup. The Setupmenu is displayed. Press the button. 2 Press the EXITbutton to exit the menu.4 Press the or button to move to V-Keystone, then press the button. Press the œor √button to adjust.3 Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√MoveEnter Return V-Keystone0 Downloaded From projector-manual.com Samsung Manuals
Test Patterns Generated by the projector itself. Utilized as installation basis for better installation of the projector. Setup Test Patterns 47 1 MENU 2, 3, 4 Select 2, 3, 4 …/† 5 EXIT NOTE The Crosshatch and Screen Size patterns of this projector are provided by JKP (JK Production). The Red/Green/Blue colors of the test patterns are only for the color adjustment procedures, and may not comply with the actual colors displayed during video playback. Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Setup. The Setupmenu is displayed. Press the button. 2 Press the EXITbutton to exit the menu.5 Press the or button to move to Test Pattern, then press the button. The Test Patternmenu is displayed.3 Press the or button to move to desired pattern, then press the button. The selected pattern is displayed.4 CrosshatchYou can check whether the picture is distorted or not. Screen SizeYou can refer to picture format sizes such as 1.33:1 or 1.78:1. Color StandardYou can see the change in colours by switching between SMPTE_C, HD and EBU Colour Standards. Refer to page 32. RedRed Screen, only for color adjustment. GreenGreen Screen, only for color adjustment. BlueBlue Screen, only for color adjustment. WhiteWhite Screen, only for color adjustment. 6500K_WhiteWhite Screen, shows brightest white color possible. Test Pattern Menu Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√MoveEnter Return Test Pattern Crosshatch√Screen Size√Color Standard√Red√Green√Blue√ †More MoveEnter Return Test Pattern … More White√6500K_White√ MoveEnter Return Downloaded From projector-manual.com Samsung Manuals
Restoring the Factory Default Settings Used to restore setting values to factory defaults. Setup Restoring the Factory Default Settings 48 1 MENU 2, 3, 4 Select 2, 3, 4 …/†/œ/√ 5 EXIT NOTE User settings includingEdit Nameand Custom Picturewill be reset. Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Setup. The Setupmenu is displayed. Press the button. 2 Press the EXITbutton to exit the menu.5 Press the or button to move to Factory Default , then press the button.3 Press the œor √button to move to OK, then press the button. Setting values are returned to factory defaults.4 Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√MoveEnter Return Factory Default Move OK Back to Factory Default setting?Cancel EnterReturn Downloaded From projector-manual.com Samsung Manuals
Information You can check external source signals, picture setup, PC picture adjustment and lamp use time. Setup Information 49 Press the INFObutton. 1 MENU 2, 3 Select 2, 3 …/† 4 EXIT One Touch Press the MENUbutton. The main menu is displayed.1 Press the or button to move to Setup. The Setupmenu is displayed. Press the button. 2 Press the EXITbutton to exit the menu.4 Press the or button to move to Information, then press the button. You can check external source signals, picture setup, PC picture adjustment and lamp use time.3 InformationInput Source : PC Picture Mode : Movie1 Picture Size : Full Brightness : 50 Contrast : 50 Color Temperature : 6500K R-Gain : 50 G-Gain : 50 B-Gain : 50 R-Offset : 0 G-Offset : 0 B-Offset : 0Color standard : EBU DNIe : On Install : Front-Floor Light Setting : Theater V-Keystone : 0 Coarse : 1344 Fine : 101 Resolution : 1024X768 H-Frequency : 31KHz V-Frequency : 70Hz Lamp Time : 0 Hour OK Setup Install : Front-Floor √Light Setting : Theater√V-Keystone√Test Pattern √PC√Factory Default√Information√MoveEnter Return InformationInput Source : PC Picture Mode : Movie1 Picture Size : Full Brightness : 50 Contrast : 50 Color Temperature : 6500K R-Gain : 50 G-Gain : 50 B-Gain : 50 R-Offset : 0 G-Offset : 0 B-Offset : 0Color standard : EBU DNIe : On Install : Front-Floor Light Setting : Theater V-Keystone : 0 Coarse : 1344 Fine : 101 Resolution : 1024X768 H-Frequency : 31KHz V-Frequency : 70Hz Lamp Time : 0 Hour OK Downloaded From projector-manual.com Samsung Manuals
Downloaded From projector-manual.com Samsung Manuals