Home > Samsung > Projector > Samsung Sp H710ae User Manual

Samsung Sp H710ae User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung Sp H710ae User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							VISUAL REALISM
    Connections and Source Setup
    Before Connections....................................22
    Connecting to Video Equipment................23
    Setting up the External Input Source........26
    Naming the External Connections............27
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							1.Refer to the manual of the device the projector is connected to. The number and
    position of ports may differ depending on type of devices.
    2.Do not connect power until all the connections are completed. If you try to connect
    power while connecting cables, it may result in damage to the projector.
    3.Check the type of ports the projector is connected to.
    Check the following Before Connecting
    Before Connections
    Check the followings before connecting the projector to other devices.
    Connections and Source Setup
    Before Connections
    22
    Refer to Rear Side and Cables on page 10 for cables used for connection.
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							CONNECTING TO VIDEO EQUIPMENT
    Connecting to VCR/Camcorder/Cable Box
    Connections and Source Setup
    Connecting to Video Equipment
    23
    Connect COMPOSITE(yellow) input port of the projector to the VIDEO OUT
    (yellow)
    port of video equipment using the video cable.
    If the video equipment has S-VIDEO OUTport, connect it to S-VIDEOinput port of the projector.
    Turn on the projector and press the
    COMPOSITEbutton to select Composite.
    Connect the projector and the video
    equipment via S-Video cable and press the 
    S-VIDEObutton to select  S-Video.
    When Composite Mode is not available, check the
    video cables are in place.
    1
    Viewing the picture
    NOTE
    Check that the projector and the video
    equipment are turned off before connecting
    cables.
    This projector does not support sound.
    (Separate audio system is needed for sound.)
    Rear side of Projector
    VCR S-Video Cable
    Video (Composite) Cable
    Cable BoxCamcorder
    CompositeCOMPOSITE
    1
    S-VIDEO
    2
    or
    Rear Connection
    2
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							24
    Connections and Source Setup
    Connecting to Video Equipment
    S-VIDEO OUTCOMPONENT VIDEO OUT AUDIO OUT
    Rear side of Projector
    DVDComponent Cable
    CONNECTING TO VIDEO EQUIPMENT
    Connecting to DVD
    Rear Connection
    Connect COMPONENT1or COMPONENT2(Y/Pb/Pr) ports of the projector to
    Component port on the rear side of DVD using Component Cable.
    Turn on the projector and press the COMP.1
    button to select Component1.
    Press the 
    COMP.2button to select
    Component2if COMPONENT2is connected.
    When Component Mode is not available, check that
    the component cables are in place.
    Viewing the picture
    NOTE
    Component Ports are marked as (Y, Pb,Pr),
    (Y, B-Y, R-Y) or (Y, Cb, Cr) depending on
    the manufacturer.
    Component11COMP.1
    1
    COMP.2 
    22
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							Connections and Source Setup
    Connecting to Video Equipment
    25
    Connect antenna cable to antenna
    signal input terminal of the receiver.
    1
    Connect COMPONENT1or
    COMPONENT2(Y/Pb/Pr) port of the
    projector to Component port of the
    receiverusing Component Cable.
    If the receiver has DVIor PC OUTport,
    you can connect it to DVIor PCinput
    port of the projector. 
    2
    Turn on the projector and press the COMP.1
    button to select Component1.
    Press the 
    COMP.2button to select
    Component2if COMPONENT2is connected.
    If the receiver is connected to DVI or PC port,
    press the 
    DVIor PCbutton to select DVIor PC
    respectively.
    When Component Mode is not available, check that
    the component cables are in place.
    DVI
    PC
    Component1
    DVI
    Rear side of Projector
    Digital TV Receiver
    (Set-Top Box)DVI Video CablePC Video Cable
    Component Cable
    CONNECTING TO VIDEO EQUIPMENT
    Connecting to the Digital TV Receiver 
    or
    Rear Connection
    Viewing the picture
    1
    2COMP.1
    1
    COMP.2
    2
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							Connections and Source Setup
    Setting up the External Input Source
    26
    Press the MENUbutton.
    The main menu is displayed.1
    Press the desired source button (COMP.1/
    COMP.2/ S-VIDEO/COMPOSITE/ PC/DVI).
    Pressing a button switches to the respective mode. 
    You can not switch to the mode if the projector is not
    connected to the respective device.One Touch
    1
    MENU
    2, 3, 4
    Select
    4
    …/†
    5
    EXIT
    Setting up the External Input Source
    You can select a device connected to the projector to display.
    Press the  button to select Input.
    The Inputmenu is displayed.2
    Press the  button to select Source List.
    The Source Listmenu is displayed.3
    Press the or button to move to desired input
    mode, then press the  button.
    The source input you chose is displayed.
    If the input mode is not selected, check that cables are in place.4
    Press the EXITbutton to exit the menu.5
    Input
    Source List : Component1√Edit Name√
    MoveEnter Return
    Source List
    Component1 : ----Component2 : ----S-Video : ----Composite : ----PC : ----DVI : ----
    MoveEnter Return
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							Naming the External Connections
    You can select and set up the type of device you want to connect to the projector.
    Connections and Source Setup
    Naming the External Connections
    27
    1
    MENU
    2, 3, 4, 5
    Select
    3, 4,5
    …/†
    6
    EXIT
    Press the MENUbutton.
    The main menu is displayed.1
    Press the  button to select Input.
    The Inputmenu is displayed.2
    Press the or button to move to Edit Name,
    then press the  button.
    The Edit Namemenu is displayed.3
    Press the EXITbutton to exit the menu.6
    Press the or button to move to desired
    device, then press the  button.
    Setup is switched to the selected device.5
    Press the or button to move to edited input
    mode, then press the  button.4
    Input
    Source List : Component1√Edit Name√
    MoveEnter Return
    Edit Name
    Component1 : ----√Component2 : ----√S-Video : ----√Composite : ----√PC : ----√DVI : ----√
    Move Enter Return
    ----VCR
    DVD
    Cable
    HD
    Satellite
    AV Receiver
    †
    Edit Name
    Component1 : ----√Component2 : ----√S-Video : ----√Composite : ----√PC : ----√DVI : ----√
    MoveEnter Return
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							Picture Adjustment
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							VISUAL REALISM
    Picture Adjustment
    Selecting Picture Mode..............................30
    Custom Settings of the Picture..................31
    Changing the Color Standard....................32
    Selecting and Adjusting Color 
    Temperature
    ................................................33
    Gamma Correction......................................34
    Saving Custom Picture Settings................35
    Setting up DNIe..........................................36
    Selecting Picture Size..................................37
    Screen Position Adjustment......................39
    Film Mode....................................................40
    Overscan......................................................41
    Still Picture..................................................42
    Downloaded From projector-manual.com Samsung Manuals 
    						
    							Selecting Picture Mode
    Picture Adjustment
    Selecting Picture Mode
    30
    Press the P.MODEbutton.
    Each press of the button, picture mode is switched toDynamic, Standard, Movie1, Movie2, User1, User2,User3and Custom. One Touch
    1
    MENU
    3, 4
    Select
    2, 4
    …/†
    5
    EXIT
    Press the MENUbutton.
    The main menu is displayed.1
    Press the or button to move to Picture.
    The Picturemenu is displayed.2
    Press the  button.
    The Picture Modeis selected.3
    Press the  button again.
    Press the 
    or button to move to desired
    mode, then press the  button.
    Setup is switched to the selected mode.
    4
    Press the EXITbutton to exit the menu.5
    Picture Color
    GammaModes Temperature
    Dynamic9300K Gamma Mode3: Graphic Mode
    Standard8000K Gamma Mode2: Video Mode
    Movie16500K
    Gamma Mode1: Film Mode
    Movie25500K
    Picture
    Picture Mode : Movie 1√Custom Picture√Picture Size : Full√Position√DNIe : Off√Film Mode : On √Overscan : On√MoveEnter Return
    Picture
    Picture Mode : Movie 1√Custom Picture√Picture Size : 
    Position
    DNIe : Off
    √Film Mode : On √Overscan : On√Move Enter Return
    Dynamic
    Standard
    Movie1
    Movie2
    User1
    User2
    User3 
    Custom
    Standard
    NOTE
    User 1, 2, and 3 Saving
    Options are designed
    for setup  and storage of
    various users’
    customized picture
    modes.
    Downloaded From projector-manual.com Samsung Manuals 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung Sp H710ae User Manual