Samsung SP-61L3HR Dlp Tv Instruction Manual

							Changing the Location of the Sub Picture
English - 61
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Position”, then press
the ENTER button.
Press the 
…or †button to
select a position you want,
then press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
PIP
PIP : On
Source : TV
Swap
Size
Position
Channel : Air 11
Select Sound : Main
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Picture
Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							Changing the Channel of the Sub Picture
After you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
English - 62
Special Features
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Channel”, then press
the ENTER button.
Press the 
…or †button to
select a channel you want,
then press the ENTER button.
Press the EXIT button to exit.
Alternate method
Press the CH or CH button on the remote control to change
channels of sub picture during PIP on.
Picture
Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
PIP
PIP : On
Source : TV
Swap
Size
Position
Channel : Air 11
Select Sound : Main
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
▲
▼Air 11
NOTE
•The channels of sub picture are not available when antenna is set to “ANT 2 IN”. It links to
“ANT 1 IN”.
Picture
Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							English - 63
Selecting the Sound Source
You can use this feature to hear sound from the main or sub picture.
1
Press the MENU button.
Press the 
…or †button to
select “Picture”, then press
the ENTER button.
2
Press the …or †button to
select “PIP”, then press the
ENTER button.
3
Press the …or †button to
select “Select Sound”, then
press the ENTER button.
Press the 
…or †button to
select “Main” or “Sub”,
then press the ENTER button.
“Main” is for the main TV
picture audio, and “Sub” is
for the sub picture (PIP)
audio.
Press the EXIT button to exit.
Picture
Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
PIP
PIP : On
Source : TV
Swap
Size
Position
Channel : Air 11
Select Sound : Main
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Main
Sub
Picture
Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							English - 64
Special Features
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. Trusurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “SRS TSXT”, then
press the ENTER button.
3
Press the …or †button to
select “Off”, “3D Mono” or
“Stereo”, then press the
ENTER button.
Press the EXIT button to exit.
Alternate method
Press the SRS button on the remote control repeatedly to select one
of the settings.
Sound
Mode : Standard
Equalizer
SRS TSXT: Off
MTS : Stereo
Auto Volume : Off
Internal Mute : Off
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Off3D MonoStereo
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							English - 65
Choosing a Multi-Channel Sound (MTS) track
Depending on the particular program being broadcast, you can listen to “Mono”, “Stereo” or
“SAP (Separate Audio Program)”. “SAP” audio is usually a foreign-language translation.
Sometimes “SAP” has unrelated information like news or weather.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “MTS”, then press the
ENTER button.
3
Press the …or †button to
select “Mono”, “Stereo” or
“SAP”, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method
Press the MTS button on the remote control repeatedly to select
one of the settings.
•Choose “Mono” for channels that are broadcasting in mono, or
if you are having difficulty receiving a stereo signal.
•Choose “Stereo” for channels that are broadcasting in stereo.
•Choose “SAP” to listen to the Separate Audio Program, which
is usually a foreign-language translation.
Sound
Mode : Standard
Equalizer
SRS TSXT : Off
MTS: Stereo
Auto Volume : Off
Internal Mute : Off
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
MonoStereoSAP
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							Special Features
English - 66
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the
volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Auto Volume”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button. 
Press the EXIT button to exit.Sound
Mode : Standard
Equalizer
SRS TSXT : Off
MTS : Stereo
Auto Volume: Off
Internal Mute : Off
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
OffOn
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							English - 67
Enjoying the Sound of External Speakers
When using external device such as Home Theater Systems, external speaker, or external Audio
Amplifier set “Internal Mute” to “On” to produce sound which is consistent with what the picture
shows.
1
Press the MENU button.
Press the 
…or †button to
select “Sound”, then press
the ENTER button.
2
Press the …or †button to
select “Internal Mute”, then
press the ENTER button.
3
Press the …or †button to
select “Off” or “On”, then
press the ENTER button. 
Press the EXIT button to exit.Sound
Mode : Standard
Equalizer
SRS TSXT : Off
MTS : Stereo
Auto Volume : Off
Internal Mute: Off
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
OffOn
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Sound
Mode : Standard√Equalizer√SRS TSXT : Off√MTS : Stereo√Auto Volume : Off√Internal Mute : Off√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup 
						

							English - 68
Special Features
Using the V-Chip
Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is
defined by the user). The on-screen menu will instruct you to assign a password (you can change
it later, if necessary).
NOTE
•The V-Chip doesn’t function when the PIP is active.
How to Change Your Password
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
Press the 
…or †button to
select “V-Chip”, then press
the ENTER button.
2
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is “0000”.)
The “V-Chip” menu is
displayed.
3
Press the …or †button to
select “Change PIN”, then
press the ENTER button.
4
Press the number buttons to
enter your new 4-digit pin
number.
Re-enter your new pin
number to confirm.
Press the EXIT button to exit.
NOTE
•If you forget the pin
number, press the
remote control buttons
in the following
sequence, which resets
the pin to 0-0-0-0:
POWER (Off), MUTE,
8, 2, 4, POWER (On).
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
V-Chip
09Enter PINReturn
Input
Picture
Sound
Channel
Setup
Enter PIN
*
V-Chip
V-Chip Lock : Off√TV Parental Guidelines√MPAA Rating√Change PIN√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
V-Chip
V-Chip Lock : Off√TV Parental Guidelines√MPAA Rating√Canadian English√Canadian French√Change PIN√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
Change PIN
09Enter PINReturn
Input
Picture
Sound
Channel
Setup
Enter New PIN
*

 
						

							English - 69
How to Enable/Disable the Rating Controls
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
Press the 
…or †button to
select “V-Chip”, then press
the ENTER button.
2
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is “0000”.)
The “V-Chip” menu is
displayed. 
3
Press the ENTER button to
select “V-Chip Lock”.
Press the 
…or †button to
select “On”, then press the
ENTER button.
Press the EXIT button to exit.
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
V-Chip
09Enter PINReturn
Input
Picture
Sound
Channel
Setup
Enter PIN
*
V-Chip
V-Chip Lock: Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Change PIN
MoveEnterReturn
Input
Picture
Sound
Channel
SetupOffOn
V-Chip
V-Chip Lock : Off
TV Parental Guidelines
MPAA Rating
Change PIN
MoveEnterReturn
Input
Picture
Sound
Channel
SetupOffOn
  
						

							English - 70
Special Features
How to Set up Restrictions Using the “TV Parental Guidelines”
The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines”
or “MPAA Rating”.
1
Press the MENU button.
Press the 
…or †button to
select “Setup”, then press the
ENTER button.
Press the 
…or †button to
select “V-Chip”, then press
the ENTER button.
2
Press the number buttons to
enter your current 4-digit pin
number.
(The default pin number for
a new TV set is “0000”.)
The “V-Chip” menu is
displayed.
3
Press the …or †button to
select “TV Parental
Guidelines”, then press the
ENTER button.
Setup
Language : English√Time√V-Chip√Caption√Blue Screen : Off√Melody : On√Color Weakness√PC√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
V-Chip
09Enter PINReturn
Input
Picture
Sound
Channel
Setup
Enter PIN
*
V-Chip
V-Chip Lock : On√TV Parental Guidelines√MPAA Rating√Change PIN√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup
V-Chip
V-Chip Lock : On√TV Parental Guidelines√MPAA Rating√Canadian English√Canadian French√Change PIN√
MoveEnterReturn
Input
Picture
Sound
Channel
Setup