Samsung SP-61L3HR Dlp Tv Instruction Manual
Have a look at the manual Samsung SP-61L3HR Dlp Tv Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English - 41 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top box and the TV source (broadcast or cable). Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”. Press the …or †button to select a signal source, then press the ENTER button. Press the EXIT button to exit. Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source. NOTE •When you connect equipment to the TV, you can choose between the following sets of jacks: “AV1”, “AV2”, “S-Video1”, “S-Video2”, “Component1”, “Component2”, “PC”, “DVI” or “HDMI” on the TV’s rear panel, and “AV3” or “S-Video3” on the TV’s side panel. Input Source List : TV√Edit Name√ MoveEnterReturn Input Picture Sound Channel Setup Source List TV AV 1 : - - - - AV 2 : - - - - AV 3 : - - - - S-Video1 : - - - - S-Video2 : - - - - S-Video3 : - - - - ▼ More MoveEnterReturn Input Picture Sound Channel Setup AV 1
Assigning Names to External Input Mode This feature enables you to name the input source you have connected. Operation English - 42 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the …or †button to to select “Edit Name”, then press the ENTER button. 3 Press the …or †button to select a signal source, then press the ENTER button. Press the …or †button to select an external device, then press the ENTER button. Press the EXIT button to exit. Input Source List : TV√Edit Name√ MoveEnterReturn Input Picture Sound Channel Setup Input Source List : TV√Edit Name√ MoveEnterReturn Input Picture Sound Channel Setup Edit Name AV 1: - - - - AV 2 : - - - - AV 3 : - - - - S-Video1 : - - - - S-Video2 : - - - - S-Video3 : - - - - Component1 : - - - - ▼ More MoveEnterReturn Input Picture Sound Channel Setup- - - - VCR DVD Cable STB HD STBSatellite STBAV Receiver▼
English - 43 Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the STILL button. To return to normal viewing, press it again. NOTE •In the PIP mode, the main and sub pictures are stilled at the same time. Remote Control VCR/DVD Buttons Slide the cover of the remote control up to access buttons that can control the tape functions of a connected VCR or DVD, including Rewind, Stop, Play/Pause and Fast Forward. Slide the cover of your remote control unit for access to the tape function controls. Press the appropriate buttons to control your VCR or DVD.
Special Features English - 46 Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). NOTE •The remote control might not be compatible with all VCRs, DVD players and Cable boxes. Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). 2 Press the MODE button to switch the remote control to the VCR (CABLE or DVD) mode. The remote control has five modes: TV, STB, VCR, CABLE and DVD. 3 On your Samsung remote control, press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD player) code listed on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.) 5 Press the POWER button. Your VCR (Cable box or DVD player) should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player). 6 Once your remote control is set up, press the MODE button any time you want to use the remote to operate your VCR (Cable box or DVD player). NOTES •When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE and FF) will still operate your VCR (or DVD player). •When your remote control is in the STB, VCR, CABLE or DVD mode, the volume buttons still control your TV’s volume.
English - 47 Remote Control Codes VCR Codes DVD Codes Cable Box Codes
Fine Tuning Channels The Fine Tuning function lets you manually adjust the TV’s tuner if you have difficulty tuning channels. English - 48 Special Features 1 Using the number buttons on the remote control, select the channel you want to fine tune. 2 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 3 Press the …or †button to select “Fine Tune”, then press the ENTER button. 4 Press the œor √button to adjust the fine tuning. To store the fine tuning setting in the TV’s memory, press the ENTER button. The symbol “*” is displayed. To reset the fine tuning to “0”, select “Reset” by pressing the …or †button, then press the ENTER button. Press the EXIT button to exit. Channel Antenna : Ant.1√Air/CATV : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√▼ More MoveEnterReturn Input Picture Sound Channel Setup Channel Antenna : Ant.1√Air/CATV : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√▼ More MoveEnterReturn Input Picture Sound Channel Setup Fine Tune Air 12 3 MoveSaveReturn Fine Tune Reset Air 12 *3 Adjust MoveEnterReturn Fine Tune Reset Air 12 0 MoveEnterReturn Reset
LNA (Low Noise Amplifier) When a weak broadcast signal causes unclear noisy picture the “LNA” feature improves the picture quality by setting to “On”. If you experience noise on a certain channel, set the “LNA” to “On” or “Off” for this channel, to obtain the optimum picture. English - 49 1 Press the MENU button. Press the …or †button to select “Channel”, then press the ENTER button. 2 Press the …or †button to select “LNA”, then press the ENTER button. 3 Press the …or †button to select “On” or “Off”, then press the ENTER button. Press the EXIT button to exit. NOTE •This function works in “ANT 1 IN” mode only (not available in “ANT 2 IN” mode). Channel ▲ More LNA : Off Scan MoveEnterReturn Input Picture Sound Channel SetupOffOn Channel Antenna : Ant.1√Air/CATV : Air√Auto Program√Add/Delete√Favorite Channels√Name√Fine Tune√▼ More MoveEnterReturn Input Picture Sound Channel Setup Channel ▲ More LNA : Off√Scan√ MoveEnterReturn Input Picture Sound Channel Setup
English - 50 Special Features Selecting the Color Tone 1 Press the MENU button. Press the …or †button to select “Picture”, then press the ENTER button. 2 Press the …or †button to select “Color Tone”, then press the ENTER button. 3 Press the …or †button to select “Cool2”, “Cool1”, “Normal”, “Warm1” or “Warm2”, then press the ENTER button. Press the EXIT button to exit. NOTE •Not available in the “Cinema” picture mode. Picture Mode : Standard Color Tone: Warm1 Size : Wide Digital NR : Off DNIe : On My Color Control Film Mode : Off PIP MoveEnterReturn Input Picture Sound Channel SetupCool2 Cool1 Normal Warm1 Warm2 Picture Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup Picture Mode : Standard√Color Tone : Warm1√Size : Wide√Digital NR : Off√DNIe : On√My Color Control√Film Mode : Off√PIP√ MoveEnterReturn Input Picture Sound Channel Setup