Samsung Sdr3102 N Manual

English _41
! MAIN MENU
6. When the updating is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
 
M 
`If “Upgrade Failed” appears, retry from the step 4.
When you experience continued failure, consult the service 
center for assistance.
 
`When you perform S/W update remotely using Smart Viewer, 
it may take a max of 3 minutes to complete the update since 
Smart Viewer popped up a confirmation message. This is to 
guarantee that the DVR set operates stably. For a...

42_ main menu
main menu
Settings
You can copy and import the DVR settings by using a storage media.
          Using the mouse may help make setup easier.
1. Use the up/down buttons (
▲▼) in  window to 
move to , and press [ENTER] 
button.
2.  Select .
A window of storage device and load factory default 
appears.
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and export or import settings data to a storage 
device.
•	 Storage Device : Shows the connected storage device.
•	 DVR USB :...

English _43
Event Log
Event log shows recorded events on alarms, motion detections and video loss. 
It also shows the log and its timestamp.
          Using the mouse may help make setup easier.
1. Use the up/down buttons (
▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
3.  Use direction buttons (
▲▼_ +) to move to the desired 
item.
4.  Set Search Day, Channel and Type and the press 
.
 
`Refer to “Using the Calendar”. (Page 34) 
Click on the calendar <
> to display the calendar...

44_ main menu
main menu
SETTING THE DEVICE
You can configure the settings of: Camera, Storage Device, Remote Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
          Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
2.  Use the left/right button (
_ +) to select .
Device setting menu is selected.
3.  Use the up/down buttons (
▲▼) to move to , 
and press [ENTER] button.
4.  Select .
You will see a...

English _45
! MAIN MENU
•	Screen Setup : The video appeared on the screen may vary 
depending on the channel’s camera, configure the DVR 
display to your preferences.
Select a channel and adjust the 
, 
, and  of the selected channel.
 
`Press the  to initialize settings back to the default 50.
•	 Privacy Region : You can specify a certain area of the 
camera video to be protected for your privacy.
6.  When the camera setup is done, press . 
To set the privacy region
 Select . 
 When “Privacy Region”...

46_ main menu
Setting the PTZ
To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched. 
For other settings, refer to the  settings. (Page 50)
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
 
A window of PTZ settings appears.
3.  Use direction buttons (
▲▼_ +) to move to a desired 
item, and select it.
•	 Port : Select a port control method for the camera that is 
connected to a...

English _47
Storage Device
You can check information on storage devices.
Confirming Devices
You can check storage devices and their free space, usage as well as status. 
Devices available are HDD, and USB devices (Memory, HDD).
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
•	 No. : Shows the assigned number of the internal HDD.
 
`To see the detailed positioning of the HDD according to the 
number, refer to .
•...

48_ main menu
Formatting
You can format a storage device.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
 
A window for selection of device for formatting appears.
3.  Use direction buttons (
▲▼_ +) to select a device to be 
formatted.
4.  Select  on the bottom of the screen.
 
Press  on the “Manage” confirmation window will 
start formatting the selected device.
5.  When the formatting is done, press .
Storage...

English _49
HDD Alarm
You can set alarm settings for HDD defects such as Check Alarm Output Por\
t, Replace Alarm Output Port, 
and its duration.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Select .
 
A window for setting HDD check and replace output ports 
and their durations appears.
3.  Use direction buttons (
▲▼_ +) to move to the desired 
item.
•	 Check Alarm Output Port : If HDD generates check alarm, 
the alarm...

50_ main menu
Remote Devices
You can set the RS-485 communication for use of PTZ Camera and system key\
board with the DVR.
Using the mouse may help make setup easier.
1. Use the up/down buttons (▲▼) in  window to 
move to , and press [ENTER] button.
2.  Use direction buttons (
▲▼_ +) to move to the desired 
item, and press [ENTER] button.
3.  Set the values of each communication setup of the remote 
device.
•	 Baudrate : Baud rate settings of the DVR, PTZ camera and 
system keyboard should be matched...