Samsung Sdr3102 N Manual

English _11
pArT nAmeS And funCTIonS (reAr)
Sdr-5102 
Sdr-4102
Sdr-3102
Part Names Functions
aVIDEO INInput port for the composite video signal.
bAUDIO INInput ports (RCA jack) for the audio signal.
cVGA OUTOutput port for VGA video signal.
de-SATAPorts used for external storage device connections.
eNETWORKNETWORK connector port.
fDC 12VDVR power input port.
gUSBUSB connector port.
hRS-485Used to establish RS-485 communications.
iHDMIHDMI connector port.
jAUDIO OUTOutput port (RCA jack) for the audio...

12_ overview
remoTe ConTroL
SeArChDisplays the search menu.
poWerDisplays the Exit pop up screen.
numBer [0~+10]Used as the numeric input keys, or displays a single channel.
T/WZooms in or out.
BACKupDisplays the Backup Menu.
modeChanges the screen mode.
menuGoes to the system menu screen.
up/down/Left/right($%_ +
)/enTerMoves the cursor up/down/left/right, and runs the 
Select Menu.
freeZeFreezes the screen temporarily.
ZoomRuns the digital zoom (x2) function.
dvrActivates the DVR function.
IdSets the...

English _13
Changing the remote Control Id
1. Press the [Id] button of the remote control and check the ID displayed on the DVR screen. 
The factory default ID of the remote control is 00.
2.  Enter 2 digits of your selection in order, while pressing the system [Id] button.
3.  When ID input is done, press the system [Id] button again to check the setting.
 
M 
`If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed. 
Remote control's ID and...

14_ connecting with other device
connecting with other device
One Year: 24HR X 365 DAY =8,760 HRTemperature
Unit: ºCLife (Unit: HOURS)
InSTALLATIon
Please take note of the followings before using this product.
•	Do not use the product outdoor. 
•	 Do not spill water or liquid in the connection part of the product.
•	 Do not impose the system to excessive shock or force.
•	 Do not pull out the power plug forcefully.
•	 Do not disassemble the product on your own.
•	 Do not exceed the rated input/output...

English _15
! ConneCTInG WITh oTher devICe
ConneCTInG exTernAL devICeS
ConneCTInG The uSB
1. By factory default, a USB port is provided for external connection.
2.  You can connect a USB HDD, USB memory or mouse to the USB port.
3.  If a USB HDD is connected to the system, recognition and settings are available in “main menu > Setting the 
device > Storage device”. (Page 47)
4. This product supports hot-plugging, which connects/removes the USB device during the system operation.
 
J 
`If you use the USB...

16_ connecting with other device
connecting with other device
ConneCTInG The CAmerA (SdC-7340BC)
Equipped with the IR LED and the illumination sensor, enables you to monitor at night as well as in daytime.
The camera is suitable for both internal and external use. 
 
`Please make sure not to fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain 
or moisture....

English _17
! ConneCTInG WITh oTher devICe
Connecting with dvr
 
`  The following figures are based on Model SDR-5102.           
Installing the camera
The camera can be installed on the wall, ceiling, shelf or a desired position using the provided bracket.
1.  Select a position where you want to install the camera.
 
`Make sure the selected position can sustain the weight of the camera.
2.  Attach the camera bracket to the wall using the supplied screws.
•	
SDC-7340BC : M4 X L20       
 
3.  Adjust the...

18_ connecting with other device
connecting with other device
ConneCTInG The rS-485 devICe
Connect the rear [rS-485 +, –] port to the PTZ camera.
 
J 
`You can connect and control the PTZ camera which supports the RS-485 comm\
unication.
 
`Check if the RS-485 device is compatible with the product first.
 
`Pay attention not to change the polarity (+/-) of the RS-485 device when co\
nnecting it.
 
`Depending on camera’s type, connection polarity can be different. For further information, 
refer to the...

English _19
! ConneCTInG WITh oTher devICe
Connecting to the network using the router     
    
     
     
    
Connecting to network through AdSL
IN1
IN3 IN4
AUDIO INAUDIO OUTVGA  LAN
RS485
IN2
\fDMI DC 12 V
USB
\bSATAVIDEO IN
Broadband Router
xDSL or Cable Modem
External 
Remote PC
DDNS Server 
(Data Center)
NETWORK
xDSL or Cable Modem
IN1
IN3 IN4
AUDIO INAUDIO OUTVGA  LAN
RS485
IN2
\fDMI DC 12 V
USB
\bSATAVIDEO IN
NETWORK
RJ-45 Ethernet Cable
(Direct Cable)
Phone(ADSL) Line
ADSL MODEM
Hub/Switcher...

20_ live
live
GeTTInG STArTed
Starting the system
1. Connect the power cable of the DVR to the wall outlet.
 
M 
`It takes about 10 seconds to display the start screen after 
booting.
2.  You will see the initialization screen.
The initialization process will last about 1 minute.
If a new HDD is installed, the initialization process may 
take longer. 
3.  The live screen appears with a beep.
Shutting down the System
You can shut down the system only if you have logged in to the DVR.
You require...