Samsung Sde 5001 N Manual
Here you can view all the pages of manual Samsung Sde 5001 N Manual. The Samsung manuals for DVR are available online for free. You can easily download all the documents as PDF.
Page 91
English _91 APPENDIX PRODUCT SPECIFICACAMERA\) ItemDetails SEB-1005R N Electrical Input Power Consumption 2.6W Video Imaging Device T Scanning System Synchronization FrequencyH: 15,625 HzH:15,625 Hz V Horizontal Resolution Min. OLux \(IR-LED\) S/N Ratio \(Y Signal\) UTPBuilt-in UTP Maximum Balanced Differential Impedance: Lens Focus Length 3.8mm Max.Aperture Ratio222 Angular Field of H:54 V:40 Oper Shutter Mode Gain Control White BalanceAuto \(3200
Page 93
English _93 APPENDIX PRODUCT SPECIFICASDE-4001\) Item VideoInputs Resolution 704x480 NTSC, LiveFrame rate 30ips NTSC, Resolution704x480 NTSC, Multi Screen display Perfor Operating System RecordingCompression Record Rate NTSC: NTSC: NTSC: ModeNTSC: P Overwrite modes Pre-eventOff/5/10/20/30sec Post-event - Off/5/10/20/30sec - 1/3/5/10/20min, Search & PlaybackSearch modeDate/time,Backup, All contains the Preview function\) Playback function NetworkT Up to 8Mbps,\(8Mbps\)/2/1.5/1...
Page 95
English _95 APPENDIX PRODUCT SPECIFICASDE-5001\) Item VideoInputs Resolution 704x480 NTSC, LiveFrame rate 30ips NTSC, Resolution704x480 NTSC, Multi Screen display Perfor Operating System RecordingCompression Record Rate NTSC: NTSC: NTSC: ModeNTSC: P Overwrite modes Pre-eventOff/5/10/20/30sec Post-event - Off/5/10/20/30sec - 1/3/5/10/20min, Search & PlaybackSearch modeBackup, Playback function NetworkT Up to 8Mbps,\(8Mbps\)/2/1.5/1 Mbps/800/600/500/400/300/200/ 100/50 kbps StreamCIF\) Maximum No....
Page 97
English _97 APPENDIX DEF This r The settings ar • Use System/Load Factory Default in MENU The default settings are based on SDE-5001. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user CategorDetails System SettingsDate/TDate T T T DST Language Permission ManagementAdminID New Password SettingRestricted...
Page 98
98_ appendix appendix CategorDetails DeviceMonitorDisplay Multi CH SEQ 5 sec VGA Sharpness 2\(Low\) Display Position Setup ModeLive Mode Play Mode Recording Recording Schedule Event Record DurationPRE Event POST Event REC Quality/ Resolution Standard Resolution Frame Rate NTSC: P Record Quality EventResolution Frame Rate NTSC: P Record Quality Record OptionDisk End ModeSetup Disk End Beep Auto Delete EventSensor DetectionSensor Operation Camera Alarm Alarm Duration Motion DetectionMode Sensitivity Level...
Page 99
English _99 APPENDIX CategorDetails EventVideo Loss DetectionVideo Loss State Alarm Alarm Duration10 sec Alarm Schedule Alarm1 NetworkConnection ModeConnectionConnection Mode Bandwidth IP Gateway Subnet Mask DNS ProtocolProtocol T Port \(TCP\) 558 W DDNS Live TResolution Quality Mailing SerSMTPSer Port Use Authentication Secure T EventEvent Inter Use Event GroupGroup Recipient Permission Recipient
Page 100
100_ appendix appendix TROUBLESHOOTING Symptom The system does not turn on and the indicator on the front panel does not work at all. Check if the power supply system is properly connected. Check the system for the input voltage from the power source. If the problem persists even after you have taken the above actions, check the power supplier and replace it with a new one if neccessar Some channels display just a black screen even if they receive video sources. Check if the camera connected to...