Samsung SCX 6322DN User Manual

2.6   
Auto Continue
This is the option to set the machine to continue printing or not, in case 
the paper size you have set and the paper within the tray mismatches. 
1Press Menu until System Setup appears on the bottom line of the 
display and press OK.
2Press OK when Machine Setup appears.
3Press the Scroll buttons until Auto Continue appears and press 
OK.
4Press the 
Scroll buttons until the binding option you want appears.
• On: automatically prints after set time passes, when the paper size...

3.1   
3 Network setup
This chapter gives you step-by-step instructions for setting up your 
machine for network connections.
This chapter includes:
•Introduction
• Supported operating systems
• Configuring TCP/IP
• Configuring EtherTalk
• Configuring IPX frame types
• Setting Ethernet speed
• Restoring the network configuration
• Printing a network configuration page
Introduction
Once you have connected your machine to a network with an RJ-45 
Ethernet cable, you can share the machine with other network...

3.2   
Static addressing
To enter a TCP/IP address from your machine’s control panel, take the 
following steps: 
1Press Menu until Admin Setup appears on the bottom line of the 
display and press OK. 
2Press the Scroll buttons until Network Setup appears and press 
OK.
3Press OK when TCP/IP appears.
4Press the Scroll buttons until Static appears and press OK.
5Press OK when IP Address appears. 
6Enter a byte between 0 and 255 using the number keypad and 
press the Scroll buttons to move between bytes....

3.3   
Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1Press Menu until Admin Setup appears on the bottom line of the 
display and press OK. 
2Press the Scroll buttons until Network Setup appears and press 
OK.
3Press the Scroll buttons until Ethernet Speed appears and press 
OK.
4Press the Scroll buttons until the speed you want appears and 
press OK.
5Press 
Stop/Clear to return to Standby mode.
Restart your machine to apply new settings.
Restoring the network...

4.1   
4 Software overview
This chapter gives you an overview of  the software that comes with your 
machine. Further details about inst alling and using the software are 
explained in the  Software Section .
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
After you have set up your machine and connected it to your computer, 
you must install the printer software . If you are a Windows or Macintosh 
OS, install the software from the supplied...