Samsung SCX 4826FN User Manual

							Basic Printing
17
About Tab
Use the About tab to display the copyright notice and the 
version number of the driver. If you have an Internet browser, 
you can connect to the Internet by clicking on the web site icon. 
See “Printing a Document” on page 12 for more information 
about accessing printer properties.
Printer Tab
If you access printer properties through the Printers folder, 
you can view the 
Printer tab. You can set the printer 
configuration.
The following procedure is for Windows XP. For other Windows 
OS, refer to the corresponding Windows Users Guide or online 
help.
1Click the Windows Start menu. 
2Select Printers and Faxes.
3Select your printer driver icon. 
4Right-click on the printer driver icon and select 
Properties.
5Click the Printer tab and set the options.  
High Altitude Correction
If your printer is going to be used at a high altitude, checking this 
option will optimize the print quality for those circumstances. 
Using a Favorite Setting  
The Favorites option, which is visible on each properties tab, 
allows you to save the current properties settings for future 
use. 
To  s a v e  a  
Favorites item:
1Change the settings as needed on each tab. 
2Enter a name for the item in the Favorites input box. 
3Click Save. 
When you save 
Favorites, all current driver settings are 
saved.
To use a saved setting, select the item from the 
Favorites drop 
down list. The printer is now set to print according to the 
Favorites setting you selected. 
To delete a Favorites item, select it from the list and click 
Delete. 
You can also restore the printer driver’s default settings by 
selecting 
Printer Default from the list. 
Using Help
Your printer has a help screen that can be activated by clicking 
the 
Help button in the printer properties window. These help 
screens give detailed information about the printer features 
provided by the printer driver.
You can also click   from the upper right corner of the window, 
and then click on any setting. 
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Printing
18
3Advanced Printing
This chapter explains printing options and advanced printing 
tasks. 
NOTE: 
• Your printer driver 
Properties window that appears in this 
User’s Guide may differ depending on the printer in use. 
However the composition of the printer properties window is 
similar.
• If you need to know the exact name of your printer, you can 
check the supplied CD-ROM.
This chapter includes:
• Printing Multiple Pages on One Sheet of Paper (N-Up 
Printing)
•Printing Posters
•Printing Booklets
• Printing on Both Sides of Paper
• Printing a Reduced or Enlarged Document
• Fitting Your Document to a Selected Paper Size
• Using Watermarks
• Using Overlays
Printing Multiple Pages on One 
Sheet of Paper (N-Up Printing) 
You can select the number of pages to print on a single sheet 
of paper. To print more than one page per sheet, the pages will 
be reduced in size and arranged in the order you specify. You 
can print up to 16 pages on one sheet.  
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12.
2From the Layout tab, choose Multiple Pages per Side in 
the 
Layout Type drop-down list. 
3Select the number of pages you want to print per sheet 
(1, 2, 4, 6, 9, or 16) in the 
Pages per Side drop-down 
list.
4Select the page order from the Page Order drop-down 
list, if necessary.
 
Check Print Page Border to print a border around each 
page on the sheet. 
5Click the Paper tab, select the paper source, size, and 
type.
6Click OK and print the document. 
12
34
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Printing
19
Printing Posters
This feature allows you to print a single-page document onto 4, 
9, or 16 sheets of paper, for the purpose of pasting the sheets 
together to form one poster-size document.
NOTE: The poster printing option is available when 600 dpi is 
selected in the resolution option on the Graphic tab.
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12.
2Click the Layout tab, select Poster Printing in the 
Layout Type drop-down list.
3Configure the poster option:
You can select the page layout from 
Poster, 
Poster, Poster. If you select 
Poster, the output will be automatically stretched 
to cover 4 physical pages.  
Specify an overlap in millimeters or inches to make it 
easier to pasting the sheets together. 
4Click the Paper tab, select the paper source, size, and 
type.
5Click OK and print the document. You can complete the 
poster by pasting the sheets together. 
0.15 inches
0.15 inches
Printing Booklets 
This printer feature allows you to print your document on both 
sides of the paper and arranges the pages so that the paper can 
be folded in half after printing to produce a booklet. 
1To change the print settings from your software 
application, access the printer properties. See “Printing a 
Document” on page 12.
2From the Layout tab, choose Booklet Printing from the 
Layout Type drop-down list. 
NOTE: The Booklet Printing option is not available for all 
paper sizes. In order to find out the available paper size for 
this feature, select the paper size in the 
Size option on the 
Paper tab, then check if the Booklet Printing in a Layout 
Type drop-down list on the Layout tab is activated.
3Click the Paper tab, and select the paper source, size, and 
type.
4Click OK and print the document.
5After printing, fold and staple the pages. 
8989
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Printing
20
Printing on Both Sides of Paper
You can print on both sides of a sheet of paper. Before printing, 
decide how you want your document oriented.
The options are:
•Printer Setting, if you select this option, this feature is 
determined by the setting you’ve made on the control 
panel of the printer. 
If this option does not appear, 
your printer does not have this feature.
•None
•Long Edge, which is the conventional layout used in 
book binding.
•
Short Edge, which is the type often used with calendars.
•
Reverse Duplex Printing, allows you to select general 
print order compare to duplex print order. 
If this option 
does not appear, your printer does not have this 
feature.
NOTE: 
• Do not print on both sides of labels, transparencies, 
envelopes, or thick paper. Paper jamming and damage to the 
printer may result. 
1To change the print settings from your software 
application, access printer properties. “Printing a 
Document” on page 12.
2From the Layout tab, select the paper orientation.
3From the Double-sided Printing section, select the 
binding option you want.     
4Click the Paper tab and select the paper source, size, and 
type.
5Click OK and print the document.
NOTE: If your printer does not have a duplex unit, you should 
complete the printing job manually. The printer prints every 
other page of the document first. After printing the first side of 
your job, the Printing Tip window appears. Follow the on-
screen instructions to complete the printing job.
 Long Edge▲ Short Edge▲
253
2
5
3
253
2
53
Printing a Reduced or Enlarged 
Document 
You can change the size of a page’s content to appear larger or 
smaller on the printed page. 
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12. 
2From the Paper tab, select Reduce/Enlarge in the 
Printing Type drop-down list. 
3Enter the scaling rate in the Percentage input box.
You can also click the   or   button.
4Select the paper source, size, and type in Paper Options. 
5Click OK and print the document. 
Fitting Your Document to a 
Selected Paper Size
This printer feature allows you to scale your print job to any 
selected paper size regardless of the digital document size. This 
can be useful when you want to check fine details on a small 
document. 
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12.
2From the Paper tab, select Fit to Page in the Printing 
Type
 drop-down list. 
3Select the correct size from the Output size drop-down 
list.
4Select the paper source, size, and type in Paper Options.
5Click OK and print the document.
A
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Printing
21
Using Watermarks
The Watermark option allows you to print text over an existing 
document. For example, you may want to have large gray 
letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally 
across the first page or all pages of a document. 
There are several predefined watermarks that come with the 
printer, and they can be modified, or you can add new ones to 
the list. 
Using an Existing Watermark
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12. 
2Click the Extras tab, and select the desired watermark 
from the 
Watermark drop-down list. You will see the 
selected watermark in the preview image. 
3Click OK and start printing. 
NOTE: The preview image shows how the page will look when 
it is printed.
Creating a Watermark
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12. 
2Click the Extras tab, and click the Edit button in the 
Watermark section. The Edit Watermark window 
appears. 
3Enter a text message in the Watermark Message box. 
You can enter up to 40 characters. The message displays 
in the preview window.
When the 
First Page Only box is checked, the watermark 
prints on the first page only.
4Select watermark options. 
You can select the font name, style, size, or grayscale level 
from the 
Font Attributes section and set the angle of the 
watermark from the 
Message Angle section. 
5Click Add to add a new watermark to the list.   
6When you have finished editing, click OK and start 
printing. 
To stop printing the watermark, select 
(No Watermark) from 
the 
Watermark drop-down list. 
Editing a Watermark
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12. 
2Click the Extras tab and click the Edit button in the 
Watermark section. The Edit Watermark window 
appears.
3Select the watermark you want to edit from the Current 
Watermarks
 list and change the watermark message and 
options. 
4Click Update to save the changes.
5Click OK until you exit the Print window. 
Deleting a Watermark
1To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12.
2From the Extras tab, click the Edit button in the 
Watermark section. The 
Edit Watermark window 
appears. 
3Select the watermark you want to delete from the Current 
Watermarks
 list and click Delete. 
4Click OK until you exit the Print window.
Downloaded From ManualsPrinter.com Manuals 
						

							Advanced Printing
22
Using Overlays
What is an Overlay?
An overlay is text and/or images stored in the computer hard 
disk drive (HDD) as a special file format that can be printed on 
any document. Overlays are often used to take the place of 
preprinted forms and letterhead paper. Rather than using 
preprinted letterhead, you can create an overlay containing the 
exact same information that is currently on your letterhead. To 
print a letter with your company’s letterhead, you do not need 
to load preprinted letterhead paper in the printer. You need only 
tell the printer to print the letterhead overlay on your 
document.
Creating a New Page Overlay
To use a page overlay, you must create a new page overlay 
containing your logo or image.
1Create or open a document containing text or an image for 
use in a new page overlay. Position the items exactly as 
you wish them to appear when printed as an overlay.
2To save the document as an overlay, access printer 
properties. See “Printing a Document” on page 12.
3Click the Extras tab, and click Edit button in the Overlay 
section. 
4In the Edit Overlay window, click Create Overlay. 
5In the Create Overlay window, type a name of up to eight 
characters in the 
File name box. Select the destination 
path, if necessary. (The default is C:\Formover).
6Click Save. The name appears on the Overlay List box. 
7Click OK or Yes to finish creating. 
The file is not printed. Instead it is stored on your 
computer hard disk drive. 
NOTE: The overlay document size must be the same as the 
documents you print with the overlay. Do not create an overlay 
with a watermark. 
WORLD BEST Dear ABC
Regards
WORLD BEST
Using a Page Overlay
After an overlay has been created, it is ready to be printed with 
your document. To print an overlay with a document:
1Create or open the document you want to print. 
2To change the print settings from your software 
application, access printer properties. See “Printing a 
Document” on page 12. 
3Click the Extras tab. 
4Select the desired overlay from the Overlay drop-down 
list box. 
5If the overlay file you want does not appear in the 
Overlay list, click Edit button and Load Overlay, and 
select the overlay file. 
If you have stored the overlay file you want to use in an 
external source, you can also load the file when you access 
the 
Load Overlay window. 
After you select the file, click 
Open. The file appears in the 
Overlay List box and is available for printing. Select the 
overlay from the 
Overlay List box. 
6If necessary, click Confirm Page Overlay When 
Printing
. If this box is checked, a message window 
appears each time you submit a document for printing, 
asking you to confirm your wish to print an overlay on your 
document. 
If this box is not checked and an overlay has been 
selected, the overlay automatically prints with your 
document. 
7Click OK or Yes until printing begins. 
The selected overlay downloads with your print job and 
prints on your document. 
NOTE: The resolution of the overlay document must be the 
same as that of the document you will print with the overlay. 
Deleting a Page Overlay
You can delete page overlays that you no longer use. 
1In the printer properties window, click the Extras tab. 
2Click the Edit button in the Overlay section. 
3Select the overlay you want to delete from the Overlay 
List
 box. 
4Click Delete Overlay. 
5When a confirming message window appears, click Yes.
6Click OK until you exit the Print window.
Downloaded From ManualsPrinter.com Manuals 
						

							Sharing the Printer Locally
23
4Sharing the Printer 
Locally
You can connect the printer directly to a selected computer, 
which is called “host computer,” on the network. 
The following procedure is for Windows XP. For other Windows 
OS, refer to the corresponding Windows Users Guide or online 
help.
NOTES: 
• Check the Operating System(s) that are compatible with 
your printer. Please refer to the OS Compatibility section of 
Printer Specifications in your Printer User’s Guide.
• If you need to know the exact name of your printer, you can 
check the supplied CD-ROM.
Setting Up a Host Computer
1Start Windows. 
2From the Start menu select Printers and Faxes. 
3Double-click your printer driver icon. 
4From the Printer menu, select Sharing. 
5Check the Share this printer box.
6Fill in the Shared Name field, and then click OK.
Setting Up a Client Computer 
1Right-click the Windows Start button and select Explore.
2Select My Network Places  and then right-click Search 
for Computers
.
3Fill in the IP address of host computer in Computer name 
field, and click 
Search. (In case host computer requires 
User name and Password, fill in User ID and password 
of host computer account.)
4Double-click Printers and Faxes.
5Right-click printer driver icon, select Connect.
6Click Yes, if the installation confirm message appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning
24
5Scanning
Scanning with your machine lets you turn pictures and text into 
digital files on your computer. Then you can fax or e-mail the 
files, display them on your web site or use them to create 
projects that you can print using Samsung SmarThru software 
or the WIA driver.
This chapter includes:
• Scanning Using Samsung SmarThru Office
• Scanning Process with TWAIN-enabled Software
• Scanning Using the WIA Driver
NOTES: 
• Check the Operating System(s) that are compatible 
with your printer. Please refer to the OS Compatibility 
section of Printer Specifications in your Printer User’s 
Guide.
• You can check your printer name in the supplied CD-
ROM.
• The maximum resolution that can be achieved 
depends upon various factors, including computer 
speed, available disk space, memory, the size of the 
image being scanned, and bit depth settings. Thus, 
depending on your system and what you are scanning, 
you may not be able to scan at certain resolutions, 
especially using enhanced dpi.
Scanning Using Samsung 
SmarThru Office 
Samsung SmarThru Office is the accompanying software for 
your machine. You can use 
SmarThru Office to scan images 
or documents from local or network scanners.
Using Samsung SmarThru Office
Follow these steps to start scanning using the SmarThru 
Office
:
1Make sure that your machine and computer are turned on 
and properly connected to each other. 
2Place your photograph or page on the document glass or 
DADF (or ADF).
3Once you have installed Samsung SmarThru Office, you 
will see the 
SmarThru Office icon on your desktop. 
Double-click the 
SmarThru Office icon.
The 
SmarThru Office window opens.
•
Tool bar: Allows you to use shortcut icons which activate 
the certain functions such as 
Scan, Search, etc.
•Working area
- SmarThru Desktop: Created within the standard 
Windows folder My Documents.
- 
Sort on Disk: Files of the folders which are not 
indexed will not be displayed in the 
Sort on Disk 
section. Sort type are Date, File Types, Latest Used. 
To add a folder for indexing, press 
Edit menu → 
Preferences → Index.
It may take longer time to show the added file folders 
according to the computer performance and the 
number of added file folders.
NOTES:
•  To do indexing and searching the PDF format file, you must 
install Adobe Acrobat Reader 7.0.5 or higher.
• You can use indexing and searching functions using 
SmarThru Office supported by Microsoft Indexing Service. 
- 
Windows Folders: Allow user to navigate through all 
the user’s files and folders.
- The right panel: Reflects the content of a selected 
folder.
•
Send to bar: Run the corresponding application directly. 
Drag and drop selected files to the appropriate 
application button.
Double-click this icon.
To o l  b a r
Wo r k i n g  a r e a
Send to bar
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning
25
- Send by E-mail: To send documents by E-mail while 
working within the 
SmarThru Office.
To send scanned images or documents by e-mail, you 
must have a mail client program, like Outlook Express, 
which has been set up with your e-mail account.
- 
Send by FTP: To upload a document file to server 
while working within the 
SmarThru Office.
- 
Send by Fax: To send documents by Local or Network 
fax machine while working within the 
SmarThru 
Office
.
4Click Scan on the tool bar of SmarThru Office window.
NOTES: 
• In Windows XP operating system, you can use 
SmarThru 
Office launcher, which is on the right end of taskbar, to open 
the 
Scan Setting window easily.
• In other operating systems beside Windows XP, click the 
SmarThru icon   in the tray area of the windows taskbar 
to activate the 
SmarThru Office launcher.
Scan Setting lets you use the following services:
•
Select Scanner: Select the Local or Network scanner. 
- Local Scan: After scanning with parallel port or USB 
port, you can store the scanned output in image or 
document file.
- Network Scan: After scanning via network, you can 
store the scanned output in JPEG, TIFF, or pdf file.
To use network scanner, your computer should install 
the 
Network Scan Manager and register the scanner 
within that program. Refer to Scanning chapter in 
users guide.
Adjust the scan settings.
Click to start scanning.
•Scan Settings: Allows you to customize settings for 
Image type, Resolution, Scan Size, Paper Source.
•
Scan To: Allows you to customize settings for File Name, 
File Format, OCR Language.
5To start scanning, click Scan. 
NOTE: If you want to cancel the scan job, click Cancel.
Uninstalling Samsung SmarThru Office
NOTE: Before beginning uninstallation, ensure that all 
applications are closed on your computer. 
1From the Start menu, select Programs.
2Select SmarThru Office, and then select Uninstall 
SmarThru Office
.
3When your computer asks you to confirm, read the 
statement and click 
OK. 
4Click Finish.
Using Onscreen Help File
For more information about SmarThru, click   at the top right 
corner of the window. The SmarThru Help window opens and 
allows you to view onscreen help supplied on the SmarThru 
program.
Scanning Process with TWAIN-
enabled Software 
If you want to scan documents using other software, you will 
need to use TWAIN-compliant software, such as Adobe 
Photoshop. The first time you scan with your machine, select it 
as your TWAIN source in the application you use. 
The basic scanning process involves a number of steps:
1Make sure that your machine and computer are turned on 
and properly connected to each other.
2Load the document(s) face up into the DADF (or ADF).
OR
Place a single document face down on the document 
glass.
3Open an application, such as PhotoDeluxe or Photoshop. 
4Open the TWAIN window and set the scan options.
Downloaded From ManualsPrinter.com Manuals 
						

							Scanning
26
5Scan and save your scanned image.
NOTE: You need to follow the program’s instructions for 
acquiring an image. Please refer to the user’s guide of the 
application.
Scanning Using the WIA Driver
Your machine also supports the Windows Image Acquisition 
(WIA) driver for scanning images. WIA is one of the standard 
components provided by Microsoft
® Windows® XP and works 
with digital cameras and scanners. Unlike the TWAIN driver, the 
WIA driver allows you to scan and easily manipulate images 
without using additional software.
NOTE: The WIA driver works only on Windows XP/Vista/7 
with USB port. 
Windows XP
1Load the document(s) face up into the DADF (or ADF).
OR
Place a single document face down on the document 
glass.
2From the Start menu on your desktop window, select 
Settings, Control Panel, and then Scanners and 
Cameras
.
3Double click your scanner driver icon. The Scanner and 
Camera Wizard launches.
4Choose your scanning preferences and click Preview to 
see how your preferences affect the picture.
5Click Next.
6Enter a picture name, and select a file format and 
destination to save the picture.
7Follow the on-screen instructions to edit the picture after it 
is copied to your computer.
Windows Vista
1Load the document(s) face up into the DADF (or ADF).     
OR
Place a single document face down on the document glass.
2Click Start → Control Panel → Hardware and Sound →  
Scanners and Cameras. 
3Click on Scan a document or picture. Then Windows 
Fax and Scan 
 application is opened automatically.
NOTE: • To view scanners, user can click on  
View scanners and 
cameras
. 
•If there is not Scan a document or picture, open the MS paint 
program and click From Scanner or Camera... on File menu. 
4Click New Scan and then scan driver is opened.
5Choose your scanning preferences and click Preview to 
see your preferences affect the picture.
6Click Scan.
NOTE: If you want to  cancel the scan job, press the Cancel 
button on the Scanner and Camera Wizard.
Windows 7
1Load the document(s) face up into the DADF (or ADF).     
OR
Place a single document face down on the document glass.
2Click Start → Control Panel → Hardware and Sound →  
Devices and Printers. 
3Click right button of mouse on device driver icon in 
Printers and Faxes → Start Scan. New Scan 
application appears.
4Choose your scanning preferences and click Preview to 
see your preferences affect the picture.
5Click Scan.
Downloaded From ManualsPrinter.com Manuals