Samsung Rts He10t User Manual

							31
GB
●  PLAYBACK
Fast Playback  D
Press the (√√ or ®®) button.
Each time the button is pressed during playback, the 
playback speed changes as follows:
 
  X2  ➞  X4 ➞  X64  ➞   X128
 
  X2  ➞   X4  ➞   X64  ➞   X128
 
  X2  ➞  X4 ➞  X8
 
  X2  ➞   X4  ➞   X8
Slow Playback  D
In Pause mode, Press the (√√ or ®®) button.
Each time the button is pressed during playback, the 
playback speed changes as follows:
1/2
➞1/4➞1/8➞1/2➞1/4➞1/8
1/2
➞1/4➞1/8
 
No sound is heard during slow playback.
Reverse slow playback does not work with DivX.
Skipping Scenes/Songs  DA
Press the [l√√ or ®®l] button.
Each time the button is pressed during playback, the 
previous or next chapter, track or directory (fi le) will be 
played.
•
•
M

•
D
D
02107A-RTSHE10-0521.indd   3102107A-RTSHE10-0521.indd   316/2/08   5:07:59 PM6/2/08   5:07:59 PM
 
						

							32
playback
Repeat Playback  BAD
Repeat playback allows you to repeatedly play a chapter, 
title, track (song), or directory (MP3 fi le).
Press the REPEAT button.
Each time the button is pressed during playback, the 
repeat playback mode  changes as follows:
DVD-VIDEO  REPEAT : OFF  REPEAT : CHAPTER  REPEAT : TITLE  REPEAT : A-B
AB REPEAT : OFF  
REPEAT : TRACK 
 REPEAT : FOLDER 
 REPEAT :  RANDOM
D    REPEAT : OFF 
REPEAT : TITLE 
 REPEAT : FOLDER
CHAPTER : Repeatedly plays the selected chapter.
TITLE : Repeatedly plays the selected title.
TRACK : Repeatedly plays the selected track.
FOLDER : Repeatedly plays the selected folder
OFF : Cancels Repeat Playback.
RANDOM : You can listen to songs randomly or in the desired sequence.
•
02107A-RTSHE10-0521.indd   3202107A-RTSHE10-0521.indd   326/2/08   5:07:59 PM6/2/08   5:07:59 PM
 
						

							33
GB
●  PLAYBACK
A-B Repeat Playback  
You can repeatedly play back a designated section of a 
DVD.
Press the REPEAT button.
Press the Cursor 
√ or ® button to select A- and then 
press the ENTER button.
When the ENTER button is pressed, the selected 
position will be stored in memory.
Press the ENTER button at the end of the desired segment.
The specifi ed segment will be played repeatedly.
d 
 To return to normal playback, press the Cursor 
√ or ® button to select  OFF.
 
The A-B Repeat function does not operate with DivX, MP3 or JPEG discs.
Step Function  D
Press the STEP button.
The picture moves forward one frame each time the button is 
pressed during playback.
No sound is heard during step motion playback. 1.
2.
•
3.
•
M
•
M
 
01
B
01 A-B
01
A
B
ENTER
REPEAT
02107A-RTSHE10-0521.indd   3302107A-RTSHE10-0521.indd   336/2/08   5:07:59 PM6/2/08   5:07:59 PM
 
						

							34
playback
Audio Language Selection Function  
Press the INFO button.
Press the Cursor 
π or † button to select the desired 
audio language.
Depending on the number of languages on a DVD 
disc, a different audio language (ENGLISH, 
SPANISH, FRENCH, etc.) is selected each time the 
button is pressed.
To operate this function, you can also press the AUDIO buttons on the remote control.
Depending on the disc, the Audio Language functions may not be available. 1.
2.
•M

Subtitle Language Selection Function  
Press the INFO button.
Press the Cursor 
π or † button to move to SUBTITLE 
() display.
Press the Cursor 
√ or ® button or ENTER button to 
select the desired subtitle.
To operate this function, you can also press the SUBTITLE buttons on the remote 
control.
Depending on the disc, the Subtitle Language functions may not be available. 1.
2.
3.M

02107A-RTSHE10-0521.indd   3402107A-RTSHE10-0521.indd   346/2/08   5:08:00 PM6/2/08   5:08:00 PM
 
						

							35
GB
●  PLAYBACK
Using the Disc Menu  
You can use the menus for the audio language, subtitle 
language, profi le, etc. 
DVD menu contents differ from disc to disc.
Press the MENU button.
Press the Cursor 
π or † button or numeric buttons 
to move to Disc Menu and then press the 
ENTER button.
When you select Disc Menu and it is not supported by 
the disc, the This menu is not 
supported message appears on the screen.
Press the Cursor 
π , †, √, ® button to select the desired 
item.
  Press the ENTER button.
The disc menu display may be different depending on the disc.
Using the Title Menu  
For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the 
availability of this feature may vary.
  Press the MENU button.
Press the Cursor 
π or † button to move to Title Menu.
Press the ENTER button.
The title menu appears.
The Title menu display may be different depending on the disc.
 V-SOUND (VIRTUAL SOUND)
    This features can be used for producing much more realistic sounds in 5.1 channels.
Press the V-SOUND button.Each time the button is pressed, the selection changes as follows :
 VIRTUAL SOUND ON    VIRTUAL SOUND OFF
For DVD Discs that has LPCM 2CH Features, can use this function. 1.
2.
•
3.
4.
M
1.
2.
3.
•
M
•
M
02107A-RTSHE10-0521.indd   3502107A-RTSHE10-0521.indd   356/2/08   5:08:00 PM6/2/08   5:08:00 PM
 
						

							36
playback
PLAYING MEDIA FILES USING THE USB HOST FEATURE
You can enjoy the media files such as pictures, movies and tunes saved in an MP3 player, USB memory or digital  camera 
in high audio by connecting the storage device to the USB port of the Room Cinema System.
Using the USB HOST feature
1. Connect the USB device to the USB port on the front of the unit.
2.  If there is partision Of USB, Press the π/† button to select the 
one of partision from USB, then Press ENTER.
3. Press the 
π/† or √/® buttons to select a file in USB. Press 
ENTER to Open file.
Note•  Each time the USB button on the remote control is pressed, a frame of the 
USB device selection will appear.
• “
  USB” appears on the display screen.
•  USB MENU screen appears on the TV screen and the saved file is played. 
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal 
before disconnecting the USB cable.
-   Press the STOP ( ) button
-   Remove the USB cable.
During playback, press the (l√√ or ®®l) button.
•  When there is more than one file, when you press the l√√ or ®®l button, the next and previous file is 
selected.
Skip Forward/Back
02107A-RTSHE10-0521.indd   3602107A-RTSHE10-0521.indd   366/2/08   5:08:01 PM6/2/08   5:08:01 PM
 
						

							37
GB
●  PLAYBACK
Fast playback 
During playback, press the , button.
Each time you press either button, the playback speed 
will change as follows: 
2x 
➞ 4x ➞ 8x.
Compatible Devices 
USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable 
disc in Windows (2000 or later) without additional driver installation.)
MP3 Player: HDD and fl ash type MP3 players.
Digital camera: Cameras that support USB Mass Storage v1.0.
Cameras that operate as a removable disc in Windows (2000 or later) without additional driver 
installation.
USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
You may experience a difference in playback quality when you connect a USB1.1 device.
For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper 
operation.
5.  USB card Reader: One slot USB card reader and Multi slot USB card reader.
Depending on the manufacturer. the USB card reader may not be supported.
If you install multiple memory devices into a multi card reader, you may experience problems.
6.  If you use a USB extension cable, the USB device might not be recognized.
Supported Formats
Format File nameFile 
extensionBit rate Version PixelSampling
Frequency
Still 
PictureJPGJPG  
.JPEG– – 640x480 –
MusicMP3 .MP3 80~384kbps – – 44.1kHz
WMA .WMA 56~128kbps V8 – 44.1kHz
Movie
DivX.AVI,.ASF 4MbpsDivX3.11~
DivX5.1, XviD720x48044.1KHz~48KHz
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected to 
a PC are not supported.
   
A device using NTFS fi le system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) 
fi le 
system is supported.)
Some MP3 players, when connected to this product, may not operate depending on the sector size 
of their fi le system.
The USB host function is not supported if a product that transfers media fi les by its manufacturer-
specifi c program is connected.
   
Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices. For information on 
the supported devices, see page 49.
•
1.
2.
3.
•
4.
•
•
•
•
•
•
•
•
•
•
•
02107A-RTSHE10-0521.indd   3702107A-RTSHE10-0521.indd   376/2/08   5:08:01 PM6/2/08   5:08:01 PM
 
						

							38
system setup
For your convenience, you can set this Room Cinemas features for the best use in your home 
environment.
SETTING THE LANGUAGE
OSD(On-Screen Display) language is set to English by default.
In Stop mode, press the MENU button.
Press the Cursor 
▼ button to move to Setup and then press the 
ENTER or ► button.
Select Language Setup and then press the ENTER or ► button.
Press the Cursor 
▲,▼ button to select Player Menu and then 
press the ENTER or ► button.
Press the Cursor 
▲,▼ button to select the desired language 
and then press the ENTER button.
The language is selected and the screen returns to Language      
Setup Menu.
d Press the RETURN button to return to the previous level. 
d Press the EXIT button to exit the setup screen.
Player Menu :  Selecting the Player Menu Language.
DISC MENU :  Selecting the Disc Menu Language (recorded on the disc)
AUDIO : Selecting the Audio Language (recorded on the disc)
  SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
DivX Subtitle : Selecting the DivX Subtitle Language.
1.
2.
3.
4.
5.
•
•
•
•
•
•Language Setup ®Audio Setup ®Display Setup ®Parental Setup :   ®DivX(R) Registration ®
Player Menu  : English
Disc Menu  : English 
Audio : English
Subtitle   : Automatic
DivX Subtitle  : Unicode
LANGUAGE SETUP
Player Menu  : English
Disc Menu  : English 
Audio : English
Subtitle   : Automatic
DivX Subtitle  : Unicode✓ English
 Français
 Deutsch
 Español
 Italiano
 NederlandsLANGUAGE SETUP
02107A-RTSHE10-0521.indd   3802107A-RTSHE10-0521.indd   386/2/08   5:08:02 PM6/2/08   5:08:02 PM
 
						

							39
GB
●  SYSTEM SETUP
SETTING THE AUDIO
OSD(On-Screen Display) language is set to English by default.
  In Stop mode, press the MENU button.
  Press the Cursor 
▼ button to move to Setup and then press the 
ENTER or ► button.
 Select Audio Setup and then press the ENTER or ► button.
  Press the Cursor 
▲,▼ button to select the required item.
  Press the Cursor 
▲,▼ button to select the desired option and then        
press the ENTER button.
The option is selected and the screen returns to Audio Setup Menu.
d Press the RETURN button to return to the previous level. 
d Press the EXIT button to exit the setup screen.
Digital Out : 
  d  
  PCM: Converts to PCM (2CH) audio. Select PCM when using        
  the Analog Audio Outputs.
  d  
Bitstream: Converts to Dolby Digital Bitstream (5.1CH).Select        
      Bitstream when using the Digital Audio Output. 
 Dynamic  Compression :  
   d  
  On: To select dynamic compression.
  d  
Off: To select the standard range.
PCM Down Sampling: 
  d  
  On: Select this when the amplifi er connected to the player is not 96KHz compatible. In this  
         case, the 96KHz signals will be down converted to 48KHZ.
  d  
Off: Select this when the amplifier connected to the player is 96KHz compatible. In this case, all  
             signals will be output with out any changes.
1.
2.
3.
4.
5.
•
•
•
•
Digital Out :  PCM
Dynamic Compression : On
PCM Down Sampling :  OnAUDIO SETUP
Language Setup ®Audio Setup ®Display Setup ®Parental Setup :   ®DivX(R) Registration ®
02107A-RTSHE10-0521.indd   3902107A-RTSHE10-0521.indd   396/2/08   5:08:02 PM6/2/08   5:08:02 PM
 
						

							40
system setup
SETTING THE DISPLAY 
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TVs aspect ratio.
In Stop mode, press the MENU button.
Press the Cursor 
▼ button to move to Setup and then press the 
ENTER or ► button.
Press the Cursor 
▼ button to move to Display Setup and then 
press the ENTER or ► button.
Press the Cursor 
▲,▼ button to select the desired item 
and then press the ENTER button.
Once the setup is complete, you will be taken to the 
previous screen.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and 
high defi nition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in 
different screen sizes, you should adjust the aspect ratio to fi t your TV or monitor.
For a standard TV, select either 4:3PS or 4:3LB option according to personal preference. 
Select WIDE/HDTV if you have a widescreen TV.
        4:3 Letter box 
      Select this to play a 16:9 picture in the letter box mode on a    
      conventional TV. Black bars will appear at the top and bottom of    
      the screen.
 
4:3 Pan&Scan 
Select this to play a 16:9 picture in the pan & scan mode on a 
conventional TV.
You can see the central portion of the screen only (with the sides of the 
16:9 picture cut off).
16:9 WIDE 
Select this to view a 16:9 picture in the full-screen mode on your 
widescreen TV.
You can enjoy the widescreen aspect.
If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
Since DVD discs are recorded in various image formats, they will look different 
depending on the software, the type of TV, and the TV aspect ratio setting.
When using HDMI, the screen is automatically converted to Wide mode. 1.
2.
3.
4.
•
•
•M


Language Setup ®Audio Setup ®Display Setup ®Parental Setup :   ®DivX(R) Registration ®
TV Aspect  : Wide
Still Mode  : Auto
Screen Messages  : On
TV System  : PAL
Video Output  : I-SCAN
HDMI  
®Picture Quality   ®
DISPLAY SETUP
02107A-RTSHE10-0521.indd   4002107A-RTSHE10-0521.indd   406/2/08   5:08:02 PM6/2/08   5:08:02 PM