Samsung Rts He10t User Manual
Have a look at the manual Samsung Rts He10t User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 GB ● DESCRIPTION description FRONT PANEL POWER() BUTTONSKIP () BUTTON Display SKIP () BUTTONVolume Control (+)10DISC TRAY STOP (¦) BUTTON Volume Control (-) PLAY/PAUSE () BUTTONEJECT BUTTON Service for Speaker system is not available. For speaker system replacement please contact your authorize Samsung Service Center. The maind unit (R Speaker) has a groove on the front side. You can open it by puliling it with a thin and hard end tool (such as ruller or screwdriver). Do not open unless for service purpose If you press the button. there will be a Bip Sound. There will be a delay between 3 seconds, when you touch the Power ON/OFF.M 10 02107A-RTSHE10-0521.indd 1102107A-RTSHE10-0521.indd 116/2/08 5:07:49 PM6/2/08 5:07:49 PM
12 description REAR PANEL SPEAKER OUTPUT CONNECTORSConnect Left, subwoofer speakers. USB HostConnect digital still camera, MP3 Player, memory stick, card reader, or other removable storage devisces. AUX IN JACKConnect to the analog output of an external device (such as a MP3 Player) HDMI OUT JACKUse the HDMI cable, connect this HDMI output terminal to the HDMI input terminal on your TV for the best quality picture. FM 75ΩConnect the FM antenna. AUDIO L, R OUT JACKSYou can connect your system to the television using the audio cable if the appropriate input is available on the television. VIDEO OUTPUT JACKConnect the TVs Video Input Jack (Video IN) to the Video Out Jack. COMPONENT VIDEO OUTPUT JACKSConnect a TV with Component video inputs to these jacks. COOLING FANThe fan always revolves when the power is on. Ensure a minimum of 10 Cm of clear space on all sides of the fan when installing the product. 4 867 123 5 9 9 02107A-RTSHE10-0521.indd 1202107A-RTSHE10-0521.indd 126/2/08 5:07:49 PM6/2/08 5:07:49 PM
13 GB ● REMOTE CONTROL Operation Range of the Remote Control The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor. remote control Insert Remote Batteries 1. Remove the battery cover in the direction of the arrow.2. Insert two 1.5V AAA batteries, paying attention to the correct polarities (+ and –).3. Replace the battery cover. Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose the batteries to heat or a fl ame. M 02107A-RTSHE10-0521.indd 1302107A-RTSHE10-0521.indd 136/2/08 5:07:49 PM6/2/08 5:07:49 PM
14 remote control TOUR OF THE REMOTE CONTROL 2 1 15 14 13 12 11 10 9 8 7 6 5 4 3 18 17 16 29 28 27 26 25 24 23 22 21 20 19 02107A-RTSHE10-0521.indd 1402107A-RTSHE10-0521.indd 146/2/08 5:07:50 PM6/2/08 5:07:50 PM
15 GB ● REMOTE CONTROL EXIT button INFO button RETURN button TUNNING button REVERSE/FORWARD SEARCH button PLAY and PAUSE button REPEAT button CANCEL button EJECT button SLEEP button USB button AUX button DVD, TUNER RECEIVER button POWER button Number (0~9) buttons REMAIN button STEP button REVERSE/FORWARD Skip buttons STOP Button MUTE button VOLUME button MENU button Preset † , π, Seek Up, Down/ Cursor/ Enter button SUBTITLE button AUDIO button Virtual Sound button EQ button ZOOM, MO/ST button AUTO SCAN, ANGLE button 29 28 27 26 17 16 15 14 13 12 11 109 8 7 6 5 4 3 2 1 18 19 20 21 22 23 24 25 02107A-RTSHE10-0521.indd 1502107A-RTSHE10-0521.indd 156/2/08 5:07:50 PM6/2/08 5:07:50 PM
16 CONNECTING THE SPEAKERS This section involves various methods of connecting the Digital Room Cinema to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. connections Position of Digital Room CinemaPlace it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening PositionThe listening position should be located about 2.5 to 3 times the distance of the TVs screen size away from the TV. Example : For 32 TVs 2~2.4m (6~8feet) For 55 TVs 3.5~4m (11~13feet) Front Speakers eiPlace these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers. Subwoofer g The position of the subwoofer is not so critical. Place it anywhere you like. LR 02107A-RTSHE10-0521.indd 1602107A-RTSHE10-0521.indd 166/2/08 5:07:50 PM6/2/08 5:07:50 PM
17 GB ● CONNECTIONS Connecting The Speakers Press down the terminal tab on the back of the speaker. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. Connect the connecting plugs to the back of the Room Cinema. Make sure the colors of the speaker terminals match the colors of the connecting plugs.1. 2. 3. • BlackRed Subwoofer Front Speaker (L) If you place a speaker near your TV set, screen color may be distorted because of the magnetic fi eld generated by the speaker. If this occurs, place the speaker away from your TV set.M Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct. Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall through the duct (hole). 02107A-RTSHE10-0521.indd 1702107A-RTSHE10-0521.indd 176/2/08 5:07:50 PM6/2/08 5:07:50 PM
18 connections CONNECTING THE VIDEO OUT TO YOUR TV Choose one of the three methods for connecting to a TV. METHOD3 (supplied)METHOD2 METHOD1 (supplied) METHOD 1 : HDMI Connect the HDMI cable from the HDMI OUT jack on the back of the Room Cinema System to the HDMI IN jack on your TV. METHOD 2 : Component Video If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (PR, PB and Y) jacks on the back of the Room Cinema System to the Component Video Input jacks on your TV. METHOD 3 : Composite Video Connect the supplied Video cable from the VIDEO OUT jack on the back of the Room Cinema System to the VIDEO IN jack on your TV. This product operates in Interlace scan mode 576i(480i) for component output.M 02107A-RTSHE10-0521.indd 1802107A-RTSHE10-0521.indd 186/2/08 5:07:51 PM6/2/08 5:07:51 PM
19 GB ● CONNECTIONS HDMI Auto Detection Function The players video output will automatically change to HDMI mode when connecting an HDMI cable while power is on. HDMI (High Defi nition Multimedia Interface)HDMI is an interface that enables the digital transmission of video and audio data with just a single connector.Using HDMI, the DVD Room Cinema transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. HDMI connection description HDMI connector - Supports video and digital audio data. - HDMI outputs only a pure digital signal to the TV. - If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. Why does Samsung use HDMI? Analog TVs require an analog video/audio signal. However, when playing a DVD, the data transmitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD Room Cinema) or an analog-to-digital converter (in the TV) is required. During this conversion, the picture quality is degraded due to noise and signal loss. HDMI technology is superior because it requires no D/A conversion and is a pure digital signal from the player to your TV. What is the HDCP? HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made. • • • • 02107A-RTSHE10-0521.indd 1902107A-RTSHE10-0521.indd 196/2/08 5:07:51 PM6/2/08 5:07:51 PM
20 connections HDMI FUNCTION Resolution Selection This function allows the user to select the screen resolution for HDMI output. In Stop mode, press the Menu button button on the remote control, to setup the HDMI output. Resolutions available for the HDMI output are 576p(480p), 720p, 1080i/1080p. SD(Standard Defi nition) resolution is 576p(480p) and HD (High Defi nition) resolution is 720p, 1080i/1080p. The default value of HDMI output is 576P(480P). If the TV does not support the confi gured resolution, you will not be able to see the picture properly. See your TV owners manual for more information on how to select the TVs Video Input source. • • M Why use HDMI (High Defi nition Multimedia Interface)? This device transmits a DVD video signal digitally without the process of converting to analog. You will get sharper digital pictures when using an HDMI connection. 02107A-RTSHE10-0521.indd 2002107A-RTSHE10-0521.indd 206/2/08 5:07:51 PM6/2/08 5:07:51 PM