Samsung Rl 39 Ebsw Owners Instructions

10
MAKING ICE
Pull out the ice cube maker.
Fill trays in up to the water level mark
(arrow).
Put the ice cube maker back in
position.
Close the freezer door.
A. Twist type
B. Normal type
Pour water into the ice cube maker.
• Fill the maker up to about 80% with
water.
Place the ice cube maker in the upper
freezer drawer.
To take out the ice cubes:
• Twist the ice cube maker slightly.
Making ice quickly
To make a large quantity of ice quickly, press the “SUPER”button to select the fast freeze...

11
USING THE WATER DISPENSER (OPTION)
With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In
addition, you can save electricity by more than 30% reducing the number of times the door is open.
Push lever
Water tank cap
Water tank
Water supply device
WHEN THE WATER DISPENSER IS NOT USED, THE FOLLOWING WAYS ARE RECOMMENDED
FILLING THE WATER TANK
Overview
Fix the water supply device tightly into the fixing hole.
• The door will not be closed automatically when...

12
INSTALLING A REGULAR BOTTLE
Press the fixing lever, lift the exclusive water tank
upwards, then remove it.
Remove the water supply device from the exclusive
water tank, then set the inner groove of the water
supply device in a regular mineral water bottle and
fix it in position by turning it.
Turn the water supply device over, then fix it in
position in the fixing hole.
• Gurgling sounds may be heard when air enters the water tank from regular mineral water or
beverage bottles.
• Some regular mineral...

13
REMOVING AND CLEANING THE ACCESSORIES
Ice cube maker (optional)
• Hold the knob of ice cube maker, then pull the ice cube
maker forward.
• Remove the ice cube maker and rinse it in water.
Ice tray (optional)
• Using the handle, pull the ice tray out as far as it will go,
then remove it by lifting it up slightly and pulling it towards
you.
Fresh salad drawers
• Pull the salad drawers out as far as it will go, then remove
it by lifting it slightly and pulling it towards you.
• Wipe it with a damp...

14
CLEANING THE WATER  DISPENSER
Connection path
Wipe out the connection path and surrounding area with a clean
damp cloth.
Dispenser Tray
Using the dispenser tray handle, remove the tray.
Empty the water in the dispenser tray, then clean it using
warm water and detergent.
Dispenser tray
Water Tank / Supply Device
Pull upward and disassemble the hooks on both
sides of the large-sized cap.
Loosen the water supply device by turning it in the
direction of the arrow and removing it.
Wipe the large-sized cap...

Unscrew the cover with      head screwdriver.
15
REPLACING THE INTERIOR LIGHT
Always unplug the appliance when replacing the refrigerator light. Otherwise, there is the danger of
electric shock.
+
• Check that the power plug is correctly connected.
• Is the temperature control on the front panel correctly set?
• Does sun shine on the appliance or are there heat sources nearby?
• Is the back of the appliance too near to the wall?
The appliance is not operating at all or the temperature is too high
• Is...

16
Store food with a high water content at the
front of a refrigerator shelf.
• If you store cold food, you save on electricity and
improve refrigeration.Store hot food in the appliance after it has
cooled.
Power Saving Tips
• Install the appliance in a cool, dry room with adequate ventilation.
Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator, for
example).
• Never block any vents or grilles on the appliance.
• Allow warm food to cool down before...

17
VIEW OF YOUR FRIDGE / FREEZER
REFRIGERATOR LIGHT (fluorescent or
incandescent, depending on the model)
REFRIGERATOR
REFRIGERATOR SHELVES
(tempered glass, crystal or
wire, depending on the model)
FRESH SALAD DRAWER
TWIST ICE MAKER AND ICE
STORAGE BIN (OPTION)
FREEZER
FREEZER DRAWER
MULTI-PURPOSE GUARD
BOTTLE GUARD
WATER DISPENSER
(OPTION)
DA68-01281E-0.1   5/22/05 1:20 PM  Page 17
 

Ambient Room Temperature Limits
This fridge/freezer is designed to operate in ambient temperatures specified by
its temperature class marked on the rating plate.
NOTE:Internal temperatures may be affected by such factors as the location of
the fridge/freezer, ambient temperature and the frequency with which
you open the door. Adjust the temperature as required to compensate
for these factors.
Temperature
SymbolAmbient Temperature
Class Maximum   Minimum
Extended Temperate SN 32 °C (90 °F) 10 °C (50 °F)...