Samsung Rl 39 Ebsw Owners Instructions

							10
MAKING ICE
Pull out the ice cube maker.
Fill trays in up to the water level mark
(arrow).
Put the ice cube maker back in
position.
Close the freezer door.
A. Twist type
B. Normal type
Pour water into the ice cube maker.
• Fill the maker up to about 80% with
water.
Place the ice cube maker in the upper
freezer drawer.
To take out the ice cubes:
• Twist the ice cube maker slightly.
Making ice quickly
To make a large quantity of ice quickly, press the “SUPER”button to select the fast freeze
function.Danger of explosion
• The coldest parts of the refrigerator are the rear panel and the lowest shelf. This is the best
place to store delicate foodstuffs.
• Glass bottles containing liquids that can freeze should never be stored in the freezer as the
glass will explode when the contents freeze.
Warning
Note
Once the water has become frozen,
turn the knobs on the ice cube trays to
empty ice cubes into the storage bin.
DA68-01281E-0.1   5/22/05 1:20 PM  Page 10
 
						

							11
USING THE WATER DISPENSER (OPTION)
With the water dispenser, you can obtain chilled water easily without opening the refrigerator door. In
addition, you can save electricity by more than 30% reducing the number of times the door is open.
Push lever
Water tank cap
Water tank
Water supply device
WHEN THE WATER DISPENSER IS NOT USED, THE FOLLOWING WAYS ARE RECOMMENDED
FILLING THE WATER TANK
Overview
Fix the water supply device tightly into the fixing hole.
• The door will not be closed automatically when the water
supply device is pulled out for a long time because of cold
leaking.
Place a separate spare beverage bottle in the location
of the exclusive water tank.
• Two 1.5 litre bottles can be used.
Open the round cap and fill the water tank up with
drinking water.
• Fill the tank up to the full level (just over 4.2 litres).
Close the round cap by pushing down on it until it
clicks into proper place.
Place a cup on the tray dispenser, then press the 
“PUSH” lever.
DA68-01281E-0.1   5/22/05 1:20 PM  Page 11
 
						

							12
INSTALLING A REGULAR BOTTLE
Press the fixing lever, lift the exclusive water tank
upwards, then remove it.
Remove the water supply device from the exclusive
water tank, then set the inner groove of the water
supply device in a regular mineral water bottle and
fix it in position by turning it.
Turn the water supply device over, then fix it in
position in the fixing hole.
• Gurgling sounds may be heard when air enters the water tank from regular mineral water or
beverage bottles.
• Some regular mineral water or beverage bottles may not fit the water supply device, depending
on their size.
• If water does not come out satisfactorily when you press the “push”button, press it again.
• Do not use carbonated drinks, such as cola, cider or sodas. When you press the button, the
beverage may spurt out due to the pressure of carbonic gas accumulated in the upper par t of
beverage bottle.
• For better hygiene, beverages with a high sugar content (juice, soft drinks) are not   
recommended.
• Use bottled mineral water or boiled tap water that does not contain any particles.
Note
DA68-01281E-0.1   5/22/05 1:20 PM  Page 12
 
						

							13
REMOVING AND CLEANING THE ACCESSORIES
Ice cube maker (optional)
• Hold the knob of ice cube maker, then pull the ice cube
maker forward.
• Remove the ice cube maker and rinse it in water.
Ice tray (optional)
• Using the handle, pull the ice tray out as far as it will go,
then remove it by lifting it up slightly and pulling it towards
you.
Fresh salad drawers
• Pull the salad drawers out as far as it will go, then remove
it by lifting it slightly and pulling it towards you.
• Wipe it with a damp cloth.
Bottle guard
• Hold the bottle guard in both hands, then remove it by
lifting it slightly and pulling it towards you.
• Wash it in water.
Freezer drawer
• Holding the freezer drawer in both hands, pull it out as far
as it will go, then remove it by lifting it up slightly and
pulling it towards you.
• Wipe it with a damp cloth.
Transparent, safety glass shelf (optional)
• Remove the shelf, then clean it using water and
detergent.
• When replacing the shelves, do not mix up the top,
middle and bottom shelves.
Rubber seals
• Clean the rubber seals with a damp cloth and detergent.
Use a wooden skewer wrapped in a small cloth to clean
in the grooves.
Before cleaning the appliance, you must always switch it off and unplug it from the wall socket.
Do not use a steam cleaner. The hot steam could damage the surface of the appliance or the electrical
components, causing a risk of electric shock.
When you remove the tempered glass shelves, load a glass and a trim simultaneously to
prevent from dropping the glass.
Note
DA68-01281E-0.1   5/22/05 1:20 PM  Page 13
 
						

							14
CLEANING THE WATER  DISPENSER
Connection path
Wipe out the connection path and surrounding area with a clean
damp cloth.
Dispenser Tray
Using the dispenser tray handle, remove the tray.
Empty the water in the dispenser tray, then clean it using
warm water and detergent.
Dispenser tray
Water Tank / Supply Device
Pull upward and disassemble the hooks on both
sides of the large-sized cap.
Loosen the water supply device by turning it in the
direction of the arrow and removing it.
Wipe the large-sized cap and the exclusive water tank
with warm water and detergent.
• Hold the cap and pull it upwards to remove it. Clean the
cap and filtering bottle attached to the cap with a soft
brush.
After cleaning the water supply device with a soft
brush, press the water supply device operation lever,
then wash it in running water.
• Clean the water tank frequently if it used to dispense tea or other such beverages. Only use
filtered tea. For better hygiene, beverages with a high sugar content (juice, soft drinks) are not
recommended.
• Deposits can be cleaned by wiping the tank with a cloth dampened in vinegar or salt water.
• Check that the rubber seal on the water supply device has not slipped off or is not damaged
by a sharp-edged object. Otherwise, it may leak.
Caution
DA68-01281E-0.1   5/22/05 1:20 PM  Page 14
 
						

							Unscrew the cover with      head screwdriver.
15
REPLACING THE INTERIOR LIGHT
Always unplug the appliance when replacing the refrigerator light. Otherwise, there is the danger of
electric shock.
+
• Check that the power plug is correctly connected.
• Is the temperature control on the front panel correctly set?
• Does sun shine on the appliance or are there heat sources nearby?
• Is the back of the appliance too near to the wall?
The appliance is not operating at all or the temperature is too high
• Is the temperature control on the front panel set to the coldest temperature?
• Is the surrounding temperature too low?
• Did you put food with a high water content in the refrigerator?
The food in the refrigerator is frozen
• Check that the appliance is installed on a stable, level floor.
• Is the back of the appliance too near to the wall?
• Have any foreign objects fallen behind or under the appliance?
• Is the noise coming from the compressor in the appliance?
• A ticking sound may be heard inside the appliance; this is normal. This sound occurs when the various
accessories contract or expand.
There are unusual noises
• Heat-proof pipes are installed in the front corners of the appliance to prevent condensation from forming.
When the surrounding temperature rises, this may not always be effective. However, this is not abnormal.
• In very humid weather, condensation may form on the outer surface of the appliance when the moisture
in the air comes into contact with the cool surface of the appliance.
The front corners and sides of the appliance are warm and condensation starts to form
PROBLEMS AND SOLUTIONS
- Fluorescent light
• Remove the interior light by pulling it downward, then replace it with
a new one.
- Incandescent light
• Turn the interior light to pull it out and replace it with a new one.
Screw the cover with      head screwdriver.+
DA68-01281E-0.1   5/22/05 1:20 PM  Page 15
 
						

							16
Store food with a high water content at the
front of a refrigerator shelf.
• If you store cold food, you save on electricity and
improve refrigeration.Store hot food in the appliance after it has
cooled.
Power Saving Tips
• Install the appliance in a cool, dry room with adequate ventilation.
Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator, for
example).
• Never block any vents or grilles on the appliance.
• Allow warm food to cool down before placing it in the appliance.
• Put frozen food in the refrigerator to thaw.
You can then use the low temperatures of the frozen products to cool food in the refrigerator.
• Do not keep the door of the appliance open for too long when putting food in or taking food out.
The shorter the time for which the door is open, the less ice will form in the freezer.
Tips
• This is the refrigerant, which cools the inside of the appliance.
You can hear a liquid babbling in the appliance
• You did not seal the food.
• Store foods covered and clean the cold inlet.
There is a bad smell inside the appliance
• Is the air outlet on the appliance plugged in?
• Space the food out as much as possible to improve ventilation.
• Is the door fully closed?
There is a layer of frost on the appliance’s walls
• Food with a high water content is stored uncovered with a high humidity level or the door has been left
open for a long time.
• Store the food with a cover or in sealed containers.
Condensation forms on the inside wall of the appliance and around vegetables
USAGE PRECAUTIONS
DA68-01281E-0.1   5/22/05 1:20 PM  Page 16
 
						

							17
VIEW OF YOUR FRIDGE / FREEZER
REFRIGERATOR LIGHT (fluorescent or
incandescent, depending on the model)
REFRIGERATOR
REFRIGERATOR SHELVES
(tempered glass, crystal or
wire, depending on the model)
FRESH SALAD DRAWER
TWIST ICE MAKER AND ICE
STORAGE BIN (OPTION)
FREEZER
FREEZER DRAWER
MULTI-PURPOSE GUARD
BOTTLE GUARD
WATER DISPENSER
(OPTION)
DA68-01281E-0.1   5/22/05 1:20 PM  Page 17
 
						

							Ambient Room Temperature Limits
This fridge/freezer is designed to operate in ambient temperatures specified by
its temperature class marked on the rating plate.
NOTE:Internal temperatures may be affected by such factors as the location of
the fridge/freezer, ambient temperature and the frequency with which
you open the door. Adjust the temperature as required to compensate
for these factors.
Temperature
SymbolAmbient Temperature
Class Maximum   Minimum
Extended Temperate SN 32 °C (90 °F) 10 °C (50 °F)
Temperate N 32 °C (90 °F) 16 °C (61 °F)
Subtropical ST 38 °C (100 °F) 18 °C (64 °F)
Tropical T 43 °C (109 °F) 18 °C (64 °F)
English 
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) 
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separ\
ate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased \
this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
DA68-01281E-0.1   5/22/05 1:20 PM  Page 18
If you have any questions or comments relating to Samsung products, 
please contact the SAMSUNG customer care center. Samsung Electronics America, Inc.1-800-SAMSUNG (7267864) www.samsung.com