Samsung Projector Sp P310me User Manual

							 
 
 |  Buttons | Input | Picture | Setup | Menu Option | Information | 
 
 
 1.
Power Button[]  
To turn it on  : Press the Power button. The Po wer LED will light up and the power is turned on. 
To turn it off  : Press the Power button until the Power LED is turned off. 
  
2. Menu Button[]  
 
 Displays the OSD menu.  
This is also used to exit the OSD or to return to a higher leve
l of the OSD menu. 
 
3. Adjustment Button[]  
 
 Moves the OSD menu or adjusts a value on the OSD menu screen.  
 
4.
Enter Button [] / SOURCE Button 
 
  Switches the input source 
or selects an OSD menu.  
Pressing the 'SOURCE' button when the menu screen is not displa yed switches the input source (PC, Composite). 
 
 
 
 
|  Buttons | Input | Picture | Setup | Menu Option | Information | 
 
  
						

							 
 
* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Source List Select an input signal co nnected to the projector. 
  1) Composite 2) PC
 
You can select an input signal connecting to the projector by p ressing the 
SOURCE button.
 
 
 
|  Buttons | Input | Picture | Setup | Menu Option | Information | 
 
  
						

							 
 
* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Picture Mode You can select a preset screen mode or make your own custom set tings. 
1) Dynamic  
    Select to set a sharper visu al quality than the standard sc reen.
2) Standard  
    Select to watch a sharper pi cture when the surrounding illumination is bright.
3) Movie   
    Select to view a picture that is comfortable for viewing an d to save power 
consumption when the room is dark.
4) Custom  
    Select to view the picture you set using the manual user se ttings.
Custom PictureYou can directly adjust the screen settings.  
(In PC Input Mode, Color Density and Color are not displayed.)   
1) Contrast   
    Adjusts the brightness diffe rence between the object and th e background. 
2) Brightness   
    Adjusts the brig htness of the screen. 
3) Sharpness   
    Adjusts the sharpn ess so that the contou rs of an object on the screen become 
clearer or blurrier. 
4) Color  
    Adjusts the color density so that the color on the screen b ecomes deeper or 
lighter. 
5) Tint  
     Adjusts the color of an object by changing the color to a  green or red tone.
Picture SizeYou can select the ratio of the screen according to your needs.   
 
1) 4:3 
2) 16:9 
 
 
 |  Buttons | Input | Picture | Setup | Menu Option | Information | 
  
						

							 
 
 
* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Install To support various Installation  positions of the projector, horizontally and vertically. 
Reversed images as well as neg ative images are supported. 
 
1) Front-Floor  : Normal Image 
2) Front-Ceiling  : Horizontal Negative Image 
3) Rear-Floor  : Vertical Negative Image 
4) Rear-Ceiling  : Horizontal/Vertical Negative Image 
V-Keystone You can compensate for a slanted picture by using the Vertical  Keystone function. 
Test PatternA test pattern generated by the  projector to be used when Insta lling and setting up the 
projector. 
PC Removes or reduces picture noise . If noise is not removed by the Fine function, run the 
Coarse function to maximum, then  run the Fine function again. 
 
  1) Auto Adjustment 
 
    Automatically performs Frequency Adjustments and Fine Adjus tments.
2) Coarse   
    Removes horizontal noise (line pattern).
3) Fine   
    Removes vertical noise (line pattern).
4) Position   
    Adjusts the screen location horizontally and vertically. 
5) Reset   
    Returns to the initial status. 
 
This menu is only activated in the PC environment.
Auto 
Adjustment 
Coarse  Fine 
Position 
Reset 
Factory Default Resets the settings to the factory defaults.  
 
  
						

							 
 |  Buttons | Input | Picture | Setup | Menu Option | Information | 
 
 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description  Play/Stop 
Language Selects the OSD menu language. 
 
Menu 
Transparency Selects the menu OSD transparency. 
1) Opaque 
2) High 
3) Medium 
4) Low 
Menu Display 
Time Selects the OSD menu display time. 
 
1) 5 sec  4) 60 sec 
2) 10 sec   5) 90 sec 
3) 30 sec   6) 120 sec 
Logo If Logo Mode is enabled, the Sam sung Logo appears on the screen when the projector 
is switched on. 
If the Logo Mode is disabled, th e Samsung Logo does not appear on the screen when 
the projector is switched on. 
 
 
 
|  Buttons | Input | Picture | Setup | Menu Option | Information | 
  
						

							 
 
 
* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Information Shows the setting information.  
 
(In Composite Mode, the Coarse, Fine, Resolution, H-Frequency a nd V-Frequency setting 
functions are not available. In PC Mode, the Color and Tint set ting functions are not 
available.)  
 
The icon appearing at the top ri ght of the information display represents the current 
power. If the battery (sold separately) is installed, the remai ning battery power is 
displayed. If AC power  is connected to the projector, a plug icon is displayed. 
Composite
PC  
						

							 
 
 |  Please check the Troubleshooting Guide below before calling for  service| 
 
 
   Installation and Connection
  
 
Symptom  Solution 
Cannot turn the power on.
When using the adaptor : Check t he connection status between the projector and the 
power cable of the adaptor. 
When using the battery : Check t he connection status of the battery and the 
projector, and the remaining battery charge. 
The screen is distorted or 
displayed in a trapezoid shape. 
Adjust the projector position so  that the beam from the projector is perpendicular 
to the screen. 
Cannot select an external 
device.
Check if the external device con nector (video cable) is properly connected to the 
corresponding port and check the connectivity. If the cable is  not properly 
connected, the external de vice can not be selected. 
 
 
   Screen and External Device
 
 
 
 
Symptom  Solution 
A blank screen is displayed.
Check the power connection of the projector.
Check if the input selection is correct.
Check if the projector cable is properly connected.
Check if the "brightness" is set to the minimum by selecting Me nu > Picture > Custom 
Picture > Brightness. 
Check if the external device is operating and check the video o utput settings.
The color is abnormal  Adjust the contrast by selecting Menu > Picture > Custom Pictu re > Contrast.
The picture is dim.Focus the lens.
Check if the projection distance is too far or too close.
A strange sound is generated by the 
product.
If the sound continues, contact a Service Center, as this might  be happening due 
to a defective part.
Lines appear on the screen.
There may be distortion when using a computer.  
Select Menu > Setup > PC > Coarse Settings and adjust the displ ay frequency.
The external device screen is not 
displayed.
Check if the external device is operating properly and then che ck if the 
"Brightness" or "Contrast" settings have been changed by select ing Menu > Picture 
> Custom Picture from the projector menu. 
Only a blue screen appears.
Check the connectivity  between the external device and other co nnections.
The screen is displayed in black and 
white or the color is abnormal. / The 
screen is too dim or too bright.
As described above, check the "Brightness" or "Contrast" of the  Menu Settings. 
To return the settings of the projector to the factory defaults, select "Factory 
Default" from the menu.
   
  
						

							 
 
 |  Care and Maintenance | Contact SAMSUNG WORLDWIDE | Other |Authority | 
 
 
 
  
   
To clean the exterior and lens of the projector 
 
Clean the projector us ing a soft dry cloth. 
 
Do not clean the projector with flammable 
substances such as benzene, thinners or a wet 
cloth, as these ma y cause problems. 
 
Do not touch the project or with a nail or any 
other sharp objects, as  this may scratch the 
surface.  
   
To clean the interior of the projector 
 
For cleaning the interior o f the projector, ask your 
Service Center or a distributor.  
 
Contact your distributor or a Service Center if 
dust or other substances are inside the 
projector. 
 
 
 
 
|  Care and Maintenance | Contact SAMSUNG WORLDWIDE | Other |Authority | 
 
 
 
 
If you have any questions or comments relating to Samsung produ cts, 
please contact a SAMSUNG customer care center.  
 
North America  
U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com
CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca
MEXICO 01-800-SAMSUNG (7267864) http://www.samsung.com/mx
 
  
						

							 
Europe 
BELGIUM 02 201 2418 http://www.samsung.com/be
CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz
DENMARK 38 322 887 http://www.samsung.com/dk
FINLAND 09 693 79 554 http://www.samsung.com/fi
FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung.com/fr
GERMANY 01805 - 121213 (€ 0,12/Min) http://www.samsung.de
HUNGARY 06 40 985 985 http://www.samsung.com/hu
ITALIA 199 153 153 http://www.samsung.com/it
LUXEMBURG 02 261 03 710 http://www.samsung.lu
NETHERLANDS 0900 20 200 88 (€ 0.10/Min) http://www.samsung.com/nl
NORWAY 231 627 22 http://www.samsung.com/no
POLAND 0 801 801 881 http://www.samsung.com/pl
PORTUGAL 80 8 200 128 http://www.samsung.com/pt
REPUBLIC OF IRELAND 0818 717 100 http://www.samsung.com/uk
SLOVAKIA 0850 123 989 http://www.samsung.com/sk
SPAIN 902 10 11 30 http://www.samsung.com/es
SWEDEN 08 585 367 87 http://www.samsung.com/se
U. K0870 SAMSUNG (7267864)                     http://www.samsung.com/uk
 
 
CIS  
RUSSIA 8-800-200-0400 http://www.samsung.ru
UKRAINE 8-800-502-0000 http://www.samsung.com/ur
ARGENTINE 0800-333-3733http://www.samsung.com/ar
BRAZIL 4004-0000 http://www.samsung.com/br
CHILE 800-726-7864 (SAMSUNG) http://www.samsung.com/cl
COLOMBIA 01 8000 112 112 http://www.samsung.com/co
COSTA RICA 0-800-507-7267 http://www.samsung.com/latin
ECUADOR 1-800-10-7267 http://www.samsung.com/latin
EL SALVADOR 800-6225 http://www.samsung.com/latin
GUATEMALA 1-800-299-0013 http://www.samsung.com/latin
JAMAICA 1-800-234-7267 http://www.samsung.com/latin
PANAMA 800-7267 http://www.samsung.com/latin
PUERTO RICO 1-800-682-3180 http://www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 http://www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-7267-864 http://www.samsung.com/latin
VENEZUELA 1-800-100-5303 http://www.samsung.com/latin
 
  
						

							 
 
Asia Pacific 
AUSTRALIA 1300 362 603  http://www.samsung.com/au
CHINA 800-810-5858, 010- 6475 1880 http://www.samsung.com.cn
HONG KONG 2862 6001 http://www.samsung.com/hk
INDIA 3030 8282, 1800 1100 11 http://www.samsung.com/in
INDONESIA 0800-112-8888 http://www.samsung.com/id
JAPAN 0120-327-527 http://www.samsung.com/jp
MALAYSIA 1800-88-9999 http://www.samsung.com/my
PHILIPPINES 1800-10-SAMSUNG (7267864) http://www.samsung.com/ph
SINGAPORE 1800-SAMSUNG (7267864) http://www.samsung.com/sg
THAILAND 1800-29-3232, 02-689-3232 http://www.samsung.com/th
TAIWAN 0800-329-999 http://www.samsung.com/tw
VIETNAM 1 800 588 889 http://www.samsung.com/vn
 
 
Middle East & Africa  
SOUTH AFRICA 0860 7267864 (SAMSUNG) http://www.samsung.com/za
U.A.E 800SAMSUNG (7267864) http://www.samsung.com/mea
 
 
  |  Care and Maintenance | Contact SAMSUNG WORLDWIDE | Other |Authority | 
 
 
 
  Advantages of Pocket Imager 
 
Long Lifetime 
Replacing the lamp is not necessary. 
Low Power Consumption
Since it consumes less power, it can run on battery power unlik e other projectors. 
   Glossary 
 
 ANSI
Abbreviations of the  American National Standards Institute 
 
 
ANSI Lumen
Unit of brightness as defined by the American National Standard s Institute. This value is determined as follows: project 
light onto a 40-inch screen, divi de the screen into 9 rectangles and measure the average brightness of each of the 
rectangles. Since the brightness at the center is generally dif ferent from that of the edges, ANSI Lumen provides a more 
precise measure of the proje ctor brightness than LUX.  
 
 
Backwards Compatible
Backwards compatibility for previ ous computer models. The SVGA  (800*600) projector provides backwards 
compatibility for SVGA and VGA (640*480) computers.  
 
 
Compression Mode 
A mode that displays video in a zoomed out format.  
 
 
Contrast Ratio
The ratio of the brightest and dimmest points that can be displ ayed on the screen.