Samsung Projector Sp P300me User Manual

  Quick Installation Guide  Warranty  User Manual CD 
 
 
 Adapter  Power Cord  PC/Composite cable 
 
 Lens Cap  Stand (View Stand Installation)   Carrying Case 
   
   
Use only the adapter supplied with the product. 
For purchasing an additional adapter, contact your dealer or nearby service center. 
 
   
   
 Optional Module  
 
 
Battery Video Cable 
 
 
 Status of Operating LEDs 
 
            : On,   : Off
POWER
(BLUE) TEMP
(RED) Description 
The set is power off.
The set is normally operating....

 
 
 
 
 Your Battery  
 
 
      
  
1. Locking  hole 
  
  
A part for installing the battery into the projector. 
  
2. Power  Terminal 
  
  
A part for connecting the power to charge only the battery. 
  
3. Battery  Latch 
  
  
A part to fix the battery onto the projector. 
  
4. Battery  Charge  Indicator 
Shows the remaining battery charge. 
  
  
While charging the battery (by connecting the AC adapter), the 
LED lights up red.
  
To check the remaining battery charge, press the PUSH button at  

 
the bottom left of the battery. The green LEDs show the 
remaining battery charge and are automatically turned off after a 
while.
  
When the AC power is connected through the adapter and the 
battery is being charged, the green LED lights up.
  
 
 Battery Installation and Precautions. 
  
  1. Installing the Battery 
 
Place the projector over the battery and push it down pushing the back of the projector forward. 
When the projector is connected to the battery, the screen is displayed...

  
  4. Charging the Battery 
 Charging the battery when the battery is separated from the projector.
zAdapter Standard : DC 14 V, 3.5 A 
  
  
 Charging the battery when the battery is installed in the projector.
  
  
  5. Battery Use Instructions 
  
Please follow the instructions below when using the battery. 
Use only an authorized battery. 
Using an unauthorized battery may damage the projector and the battery may explode during use.
Avoid heat or impact to the battery. 
Avoid strong force/impact...

at the lamp light or the light is projected onto your eyes, it may cause damage to your eyesight.
Avoid touching the battery charging terminals with metal objects such as necklaces, coins, keys, etc. 
There is a danger of fire or explosion.
Avoid keeping the battery in air-tight locations exposed to high temperatures such as within a vehicle 
exposed to the sun. Keep the battery around room temperature (between 0

than class A. 
 
 
 Supported Display Mode 
  
Resolution
Horizontal 
Frequency 
(kHz)Vertical Frequency
(Hz)Clock Frequency 
(MHz)Polarity 
(Horizontal 
/Vertical)
VGA, 640 x 350 31.469 70.086 25.175 +/-
VGA, 640 x 35037.86185.08031.500+/-
VGA, 640 X 400 37.861 85.080 31.500 -/+
VGA, 640 x 48031.46959.94025.175-/-
VGA, 640 x 480 31.469 59.940 25.175 -/-
VGA, 640 x 48037.50075.00031.500-/-
VGA, 640 x 480 43.269 85.008 36.000 -/-
VGA, 640 x 48035.00066.66730.240-/-
VGA, 720 x 400 31.469 70.087 28.322 -/+...

 
 
 |  Basic Settings | Connecting the Power | Connecting with a PC | Connecting with an AV device | 
 
 
 
 
 Installing a Projector
 
  Install the projector so that the beam from the projector is pe rpendicular to the screen. 
  
Place the projector so that the le ns is at the center of the screen.
  If the screen is not vertically installed, the picture on the s creen may not be a rectangle.
Do not install the screen in a bright surrounding. If the screen  is too bright, the picture on the screen is...

 
 
 
 Screen Size and Projection Distance  
 
 
Distance  Picture size(mm x mm)  Diagonal inch  
0.5 m 25.5 * 19.1 12.5 
1.0 m 50.8 * 38.1 25.0 
1.64 m 83.3 * 62.5 41.0 
2.0 m 101.6 * 76.2 50.0 
2.8 m 127.0 * 95.3 63.0 
 
  
The screen is designed to be optimal at 41.
 
 
 
 
 
| Basic Settings| Connecting the Power| Connecting with a PC| Connecting with an AV device| 
 
 
 
  
 
  
 
Connect the adapter to a wall outlet( ). 
Connect the power cord to the adapter and connect it to a wall outlet. 
When...

 
Use only an authorized adapter.
 
 
 
| Basic Settings| Connecting the Power| Connecting with a PC| Connecting with an AV device| 
 
 
 
  
 
  
 
 
Connect the [PC/COMPOSITE] port on the side of the projector and the Monitor OUT port [D-Sub] of the PC using a 
PC/Composite cable. 
When all the connections above have been connected, turn the projector and the PC on. 
  
 Using the Projector  
  Selecting the external input source. 
Select PC IN by using the Menu and Adjust buttons. ( SOURCE ) 
Select...