Samsung Projector Sp P300me User Manual

							 
 
 |  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
 To avoid injuries or damage to property, please read the follow ing precautions carefully and use the  
      product accordingly. 
 
Failure to follow the instructions marked with this symbol may c ause personal injury or even fatality. 
Failure to follow the instructions marked with this symbol, may cause personal injury or damage to 
the product or property. 
 
 
 
  Be sure to plug the plug in tightly as failing to do so may caus e fire. 
zWhen the connection is incomplete, it may cause fire.  
  
Do not use loose power outlets or damaged power cables.  
zThere is a danger of electric shock or fire.  
  
Under no circumstances touch the power plug with wet hands.  
zThere is a danger of electric shock.  
  
Do not plug multiple appliances into a single wall outlet.  
zThere is a danger of fire.  
  
Do not place heavy objects on the power cord. Avoid bending, pul ling or twisting the 
power cord. 
zThere is a danger of electric shock or fire.  
   Before moving the product, make sure that the power is off and r emove the power 
cord from the wall outlet. In addition, make sure that all conne ction cables are 
disconnected from other devices before moving it.  
zMoving the product without disconnecting the power cord may dama ge the 
power cord and may cause fire or electric shock.   
						

							 
  
Always unplug the unit by holding the power plug and not the power cable. 
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of electric shock or fire.  
  
Do not let water or any liquid come into contact with the adapter. 
zThis may cause fire or electric shock.  
zAvoid using the product near liquids or outdoors (i.e. rain, snow).  
zEnsure that the adapter is not exposed to wetness when cleaning the floor 
with water.  
  
Do not plug in two power adapters next to each other. 
zThere is a danger of fire.  
  
Keep the adapter away from heaters. 
zThere is a danger of fire.  
  
Strip the adapter of the plastic packaging before use. 
zThere is a danger of fire.  
  
Keep the adapter in a well-ventilated location.  
  
 
 
 
| Power Related| Installation Related| Cleaning and Use Related| 
 
 
 
 
  
Do not place candles, mosquito sticks, cigarettes, etc. over the product. 
zThere is a danger of fire.   
						

							  
When installing the product in a cabinet or on a shelf, do not let the front part of the 
product project out of the cabinet or shelf. 
zA falling product may damage the product or cause injury.  
  
Keep the power cord away from heaters. 
zThe coating of the power cord may melt and cause electric shock or fire.  
  
Do not install the product in locations exposed to oil, smoke, moisture or water 
(rainwater), or in a vehicle. 
zThere is a danger of electric shock or fire.  
  
Do not install the product in locations without ventilation such as a bookshelf or a 
wall closet. 
zThis may cause fire or damage to the product.  
  
Do not install to an unstable location, for example on a stand that is smaller than the 
product. 
zIf the product falls it may injure children or become damaged. Install on a 
stable location as the front section is heavy.  
  
In case of lightning, immediately turn the system off and disconnect the power cord 
from the wall outlet. 
zThere is a danger of electric shock or fire.  
 
  
Make sure the products vents are not blocked by a tablecloth or curtain. 
zThis may cause fire or damage the product.  
  
Place the product on the ground carefully. 
zFailing to do so may cause damage or injury.  
   
						

							Do not drop the product while moving it. 
zFailing to do so may cause damage or injury.  
  
Keep the product out of children
						

							 
  
If the product emits smoke, unusual noise, or there is a burning smell, turn the 
system off immediately, disconnect the power plug from the wall outlet, and contact 
a Service Center. 
zThere is a danger of electric shock or fire.  
  
If the power plug pin or jack is exposed to dust, water or alien substances, clean it. 
zThere is a danger of electric shock or fire.  
  
Ask a Customer Center or Service Centerto internally clean the product at least once 
a year. 
zIf the dust within the product is not cleaned over a long time, it may cause a 
problem with the product or even fire.  
  
Clean the product lightly using a soft dry cloth or towel after disconnecting the 
power cord from the wall outlet. 
zDo not clean the product using chemicals such as wax, benzene, alcohol, 
paint thinners, mosquito repellant, aromatics, lubricant, cleansing solutions, 
etc.  
  
For long periods where the product is not being used, disconnect the power plug. 
zThere is a danger of electric shock or fire.  
  
Be sure to contact an authorized Service Center when installing your set in a location 
with heavy dust, high or low temperatures, high humidity, and chemical substances, 
or where it will be operated for 24 hours continuously such as an airport, train station 
or etc. 
zFailure to do so may cause serious damage to your set.  
  
When the product is dropped or its case is broken, turn the product off and plug out 
the power plug, as this may cause electric shock or fire. 
zIn this case, contact a Service Center.  
  
Take care not to lose the lens cover of the product. 
zFailing to use the lens without the lens cover, may damage the lens.  
   
						

							Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment) - Europe only 
(Applicable in the European Union and other European countries with 
separate collection systems) 
 
This marking shown on the product or its literature, indicates that it should not 
be disposed with other household wastes at the end of its working life. To 
prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it 
responsibly to promote the sustainable reuse of material resources. 
 
Household users should contact either the retailer where they purchased this 
product, or their local government office, for details of where and how they 
can take this item for environmentally safe recycling.  
 
Business users should contact their supplier and check the terms and 
conditions of the purchase contract. This product should not be mixed with 
other commercial wastes for disposal.  
						

							 
 
 |  Product Features | Product Views | Battery (sold separately) | Product Specifications | 
 
 
 
A custom made new projector designed for important marketing act ivities and presentations of the active business man! 
The Portable Projector SP-P300ME provides high mobility and ease  of use at a reasonable price.  
 
 The New Concept Projector for High Mobility 
 
  - Small Size.  
- Lightweight. 
  
 
 
 A Battery Pack that Enables Projections without Connecting a Pow er 
Cord
 
( For more information about the battery, refer to the battery des cription.) 
 
  - The Projector is operable with a charged battery. 
- You can enjoy wide screen view
ing without connecting the power cord. 
 
 
 Next Generation Backlight Light Source, LED Lamp 
 
    - Effective energy saving through the use of low voltage. 
  - Semi-permanent long lifetime guaranteed.
 
 
 
|  Product Features | Product Views | Battery (sold separately) | Product Specifications | 
 
 
 
 
   Your Projector 
  
						

							 
  
  
1. 
Power Button[] 
To turn it on  
Press the Power button. The Power LED will light 
up and the power is turned on. 
To turn it off  
Press the Power button until the Power LED is 
turned off. 
  
2. 
Menu Button[] 
Press to display the OSD menu. 
This is also used to exit the OSD or to return 
to a higher level of the OSD menu. 
  
3. Adjustment  Button[] 
Press to move the OSD menu or to adjust a  
value on the OSD menu screen.  
  
4. 
Enter Button [] / SOURCE Button 
Press to select an OSD menu. 
When pressing the SOURCE button when  
the menu screen is not displayed the input  
source (PC, Composite)is switched. 
  
5. SERVICE 
The SERVICE terminal is used for after-sales 
services. 
  
6. PC/COMPOSITE 
To connect a PC or VCR, the PC/Composite 
cable must be connected here.  
  
   
  
7. POWER LED 
If you turn the projector on, the Power LED  
lights up and if you turn it off, the Power LED 
turns off accordingly. 
  
8. TEMP LED 
This lights up when the product is out of order. 
Refer to the Status of the Operating LEDs.  
  
9. Power Port[] 
To supply power, the power adapter must be 
connected. 
  
10.Lens 
  
11.Focus Ring 
Move it to the left or right to sharpen the image. 
  
12.Battery Port 
Install the battery into the battery port.  
(For more information about the battery, refer to 
the battery description.) 
  
 
 Accessories