Samsung Projector Sp M200 User Manual

							Installation and Connection2-2
2-2 Installing the Projector
 Install the projector so that the beam from the projector is perpendicular to the screen. 
• Place the projector so that the lens aims at the center of the screen. If the screen is not vertical, the picture on the 
screen may not appear rectangular. 
• Do not install the screen in bright surroundings. If the surroundings are too bright, the picture on the screen will be 
washed out and not display clearly.
• When using the projector in bright surroundings, use curtains to block the light.
• You can install the projector in the following locations relative to the screen: Front-Floor / Front-Ceiling / Rear-Floor / 
Rear-Ceiling. To view the installation position settings, see below.
 
To adjust the picture when you install the projector behind the screen 
To adjust the picture when you install the projector in the front of the screen
Installing behind a semi-transparent screen.
When you install the projector behind a semi-transparent screen, 
you can use the menu to adjust the picture so that it displays cor-
rectly, depending on where youve located the projector, rear-
floor (or low) or rear-ceiling. 
1.For rear-floor, press : 
Menu > Setup > Install > Rear-Floor
2.For rear-ceiling, press : 
Menu > Setup > Install > Rear-Ceiling  
Installing the projector in front of the screen. 
When you install the projector in front of a screen, you can use 
the menu to adjust the picture so that it displays correctly, 
depending on where you’ve located the projector, front-floor (or 
low) or front-ceiling.
1.For front-floor, press : 
Menu > Setup > Install > Front-Floor
2.For front-ceiling, press : 
Menu > Setup > Install > Front-Ceiling   
						

							2-3Installation and Connection
2-3 Leveling with Adjustable Feet 
 The projector can be adjusted to a height of up to 30 mm (about 12 °) from the reference point.
If
  is set to ,  is adjusted automatically.
If fine tuning is required after auto-adjustment, use .  
Press the PUSH buttons, as shown, to adjust the legs and level 
the projector. 
						

							Installation and Connection2-4
2-4 Zoom and Focus Adjustment 
 The size of your screen determines the distance you set your projector from the screen.
If you do not install your projector at the projection distance specified in the Screen Size and Projection Distance table in 
Section 2-5, you will not be able to adjust the focus correctly.
 
 Zoom Knob : You can adjust the size of the image within the 
zoom range by manipulating the Zoom Knob.
 Focus Ring : Focus the picture on the screen using the Focus 
Ring. 
						

							2-5Installation and Connection
2-5 Screen Size and Projection Distance 
A. Screen / Z. Throw Distance / Y’. Distance from Lens Center to Image Bottom
Install the projector on a flat, even surface and level the projector using the adjustable feet to obtain optimal picture quality. If 
images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward.
SCREEN SIZETHROW DISTANCEOFFSET
M (DIAGONAL)X (HORIZONTAL)Y (VERTICAL)Z (TELE)Z (WIDE) Y
INCHESCMINCHESCMINCHESCMINCHESCMINCHESCMINCHESCM
30 76.2 24 60.9 18 45.7 42.7 108.4 35.5 90.1 2.6 6.3
40 101.6 32 81.3 24 61.0 57.0 144.7 47.4 120.3 3.3 8.4
50 127.0 40 101.6 30 76.2 71.2 180.8 59.2 150.4 4.1 10.5
60 152.4 48 121.9 36 91.4 85.4 217.0 71.0 180.4 5.0 12.6
70 177.8 56 142.2 42 106.7 99.7253.1 82.9 210.5 5.8 14.7
80 203.2 64 162.6 48 121.9 113.9 289.4 94.7 240.6 6.6 16.8
90 228.6 72 182.9 54 137.2 128.2 325.6 106.6 270.7 7.4 18.9
100 254.0 80 203.2 60 152.4 142.4 361.7 118.4 300.7 8.3 21.0
110 279.4 88 223.5 66 167.6 156.6 397.8 130.2 330.8 9.1 23.1
120 304.8 96 243.8 72 182.9 170.9 434.0 142.1 360.8 9.9 25.2
130 330.2 104 264.2 78 198.1 185.1 470.3 153.9 391.0 10.8 27.3
140 355.6 112 284.5 84 213.4 199.4 506.4 165.8 421.1 11.6 29.4
150 381.0 120 304.8 90 228.6 213.6 542.5 177.6 451.1 12.4 31.5
160 406.4 128 325.1 96 243.8 227.8 578.7 189.4 481.1 13.2 33.6
170 431.8 136 345.4 102 259.1 242.1 614.8 201.3 511.2 14.1 35.7
180 457.2 144 365.8 108 274.3 256.3 651.1 213.1 541.4 14.9 37.8
190 482.6 152 386.1 114 289.6 270.6 687.3 225.0 571.4 15.7 39.9
200 508.0 160 406.4 120 304.8 284.8 723.4 236.8 601.5 16.5 42.0
210 533.4 168 426.7 126 320.0 299.0 759.5 248.6 631.5 17.4 44.1
220 558.8 176 447.0 132 335.3 313.3 795.7 260.5 661.6 18.2 46.2
230 584.2 184 467.4 138 350.5 327.5 832.0 272.3 691.8 19.0 48.3
240 609.6 192 487.7 144 365.8 341.8 868.1 284.2 721.8 19.9 50.4
250 635.0 200 508.0 150 381.0 356.0 904.2 296.0 751.8 20.7 52.5 
						

							Installation and Connection2-5
 This projector is designed to show images optimally on a 80 ~ 120 inches sized screen. 
260 660.4 208 528.3 156 396.2 370.2 940.4 307.8 781.9 21.5 54.6
270 685.8 216 548.6 162 411.5 384.5 976.5 319.7 811.9 22.3 56.7
280 711.2 224 569.0 168 426.7 398.7 1012.8 331.5 842.1 23.2 58.8
290 736.6 232 589.3 174 442.0 413.0 1049.0 343.4 872.2 24.0 60.9
300 762.0 240 609.6 180 457.2 427.2 1085.1 355.2 902.2 24.8 63.0
310 787.4 248 629.9 186 472.4 441.4 1121.2 367.0 932.3 25.6 65.1
320 812.8 256 650.2 192 487.6 455.7 1157.4 378.9 962.3 26.5 67.2
330 838.2 264 670.5 198 502.8 469.9 1193.5 390.7 992.3 27.3 69.3
340 863.6 272 690.8 204 518.0 484.2 1229.6 402.6 1022.
428.1 71.4
350 889.0 280 711.1 210 533.2 498.4 1265.8 414.4 1052.
429.0 73.5
360 914.4 288 731.4 216 548.4 512.6 1301.9 426.2 1082.
529.8 75.6
370 939.8 296 751.7 222 563.6 526.9 1338.0 438.1 1112.
530.6 77.7
380 965.2 304 772.0 228 578.8 541.1 1374.2 449.9 1142.
631.4 79.8
390 990.6 312 792.3 234 594.0 555.4 1410.3 461.8 1172.
632.3 81.9
400 1016.
0320 812.6 240 609.2 569.6 1446.4 473.6 1202.
633.1 84.0
SCREEN SIZETHROW DISTANCEOFFSET
M (DIAGONAL)X (HORIZONTAL)Y (VERTICAL)Z (TELE)Z (WIDE) Y
INCHESCMINCHESCMINCHESCMINCHESCMINCHESCMINCHESCM 
						

							2-6Installation and Connection
2-6 Lamp Replacement
Cautions on Lamp Replacement
•The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time. 
You can view the lamp usage time in the Information Display (INFO button).
• Replace the lamp with the one specified below only. 
- Lamp Model Name : 200W NSHA200SS(SP-M250), 180W NSHA180SS(SP-M220, SP-M200)
- Lamp Manufacturer : Ushio
- For inquiries on lamp purchase, please see Contact SAMSUNG WORLDWIDE in section 5-3.
• Check that the power cord is unplugged before replacing the lamp.
• Because the lamp is a high temperature and high voltage product, wait at least one hour from the time you disconnect the 
power cord before replacing the lamp.
• The projector lamp is on the top of the projector.
• Do not leave the old lamp near flammable items or in reach of children. There is a danger of fire, burns, or injury. 
• Remove dirt or foreign material around or inside the lamp unit using a proper vacuum device.
• When handling the lamp, avoid touching any part of it except for the handles. If you handle the lamp incorrectly, you can 
shorten the lamp’s lifetime and affect picture quality.
• When you change the lamp, put the projector on a flat surface. 
•The projector has been designed so that the projector does not work if the lamp cover is not completely assembled after a 
lamp replacement. If the projector does not work properly, please check the operating status of the indicator LED.
Lamp contains Mercury. Dispose According to Local, State or Federal Laws.
Lamp Replacement Procedure
 Because the lamp is a high temperature and high voltage product, wait at least one hour from the time that the power cord 
is disconnected before replacing it.
The projector lamp is on the top of the projector.
 
1.Remove the screw shown in the figure below, and then open the cover.
2.Wtih the cover open, remove the three (3) screws on the top of the projector as shown in the figure below. 
						

							Installation and Connection2-6
3.To remove the lamp, hold and then pull the lamp handle as shown in the figure below.
 Install a new lamp in the reverse order of removal.  
Replacing and Cleaning the Filter
 Precautions when replacing the projector filter:
• The filter is on the side of the projector. 
• Turn off the power of the projector, and then disconnect the power cord after the projector has cooled sufficiently.
Otherwise, its parts may be damaged due to internal heat.
• When you replace the filter, you may release some dust.
• For inquiries on replacement filter purchase, please see Contact SAMSUNG WORLDWIDE in Chapter 5.
To replace or clean the filter, follow these steps: 
1.Turn off the power of the projector, and then disconnect the power cord after the projector has cooled sufficiently.
2.Open the filter cover. 
3.Replace or clean the filter.
• When cleaning the filter, use a small vacuum cleaner designed for computers and small electronics products, or wash it under 
running water.
• After washing the filter under running water, make sure to dry it completely. The moisture may cause the filter to corrode.
• If dust cannot be separated from the filter or the filter is torn, it must be replaced.
•After cleaning or replacing the filter, run  ->  in the  menu.
Ventilation openings
For the location of the ventilation openings, see the picture below: 
•Do not block the ventilation openings. Blocking the ventilation openings can cause your projector to overheat and may cause 
it to fail. 
						

							2-6Installation and Connection
 Air outtake vent
 Air intake vent 
						

							Installation and Connection2-7
2-7 Rear Side
1. Kensington Lock slot 6. Remote Control Signal Receiver 
2. PC IN port 7. Power Input port
3. VIDEO IN port 
8. AUDIO OUT/  port
4. [AUDIO IN] L-AUDIO-R port 9. RS232C port 
5. HDMI/DVI IN port 
						

							2-8Installation and Connection
2-8 Supported Display Modes
PC Timing (D-Sub/HDMI) 
FORMATRESOLUTION
HORIZONTAL 
FREQUENCY
(KHZ)VERTICAL 
FREQUENCY 
(HZ)PIXEL 
FREQUENCY 
(MHZ)
IBM 640 x 350 70Hz 31.469 70.086 25.175
IBM 640 x 480 60Hz 31.469 59.940 25.175
IBM 720 x 400 70Hz 31.469 70.087 28.322
VESA 640 x 480 60Hz 31.469 59.940 25.175
MAC 640 x 480 67Hz 35.000 66.667 30.240
VESA 640 x 480 70Hz 35.000 70.000 28.560
VESA 640 x 480 72Hz 37.861 72.809 31.500
VESA 640 x 480 75Hz 37.500 75.000 31.500
VESA 720 x 576 60Hz 35.910 59.950 32.750
VESA 800 x 600 56Hz 35.156 56.250 36.000
VESA 800 x 600 60Hz 37.879 60.317 40.000
VESA 800 x 600 70Hz 43.750 70.000 45.500
VESA 800 x 600 72Hz 48.077 72.188 50.000
VESA 800 x 600 75Hz 46.875 75.000 49.500
MAC 832 x 624 75Hz 49.726 74.551 57.284
VESA 1024 x 768 60Hz 48.363 60.004 65.000
VESA 1024 x 768 70Hz 56.476 70.069 75.000
VESA 1024 x 768 72Hz 57.672 72.000 78.434
VESA 1024 x 768 75Hz 60.023 75.029 78.750
VESA 1152 x 864 60Hz 53.783 59.959 81.750
VESA 1152 x 864 70Hz 63.000 70.000 96.768
VESA 1152 x 864 72Hz 64.872 72.000 99.643
VESA 1152 x 864 75Hz 67.500 75.000 108.000
VESA 1280 x 720 60Hz 44.772 59.855 74.500
VESA 1280 x 720 70Hz 52.500 70.000 89.040
VESA 1280 x 720 72Hz 54.072 72.000 91.706
VESA 1280 x 720 75Hz 56.456 74.777 95.750
VESA 1280 x 768 60Hz 47.776 59.870 79.500
VESA 1280 x 768 75Hz 60.289 74.893 102.250
VESA 1280 x 800 60Hz 49.702 59.810 83.500
VESA 1280 x 800 75Hz 62.795 74.934 106.500
VESA 1280 x 960 60Hz 60.000 60.000 108.000
VESA 1280 x 960 70Hz 69.930 70.000 120.839