Samsung Projector Sp H700 User Manual

Film ModeSupports enhanced screen quality for films of 24 frames.
OverscanUsed to display raw input signals from 480p, 576p, 720p, 1080i HD sources or scale to fit to 1280 x
720 resolution after cutting out certain boundaries using software scaling.
Picture AdjustmentFilm Mode
Picture AdjustmentOverscan41
40
1
MENU2, 3, 4Select2, 3, 4…/†5EXIT
1
MENU2, 3, 4Select2, 3, 4…/†5EXIT
Press the 
MENU
button.
The main menu is displayed.
1
Press the 
▲or ▼button to move to 
Picture
.
The 
Picture
menu is...

Still PictureUsed to pause playback to see a still picture.
Picture AdjustmentStill Picture42
Press the 
STILL
button.
Each press of the button pauses and resumes play back.
One Touch
VISUAL REALISM
Setup
Flipping/Reversal of Projected Image
....44
Light Setting
................................................45
Correcting V-Keystone
..............................46
Test Patterns
..............................................47
Restoring the Factory Default Settings
....48
Information...

Flipping/Reversing the Projected ImageTo support positioning of the projector, horizontal/vertical flipping and picture reversal are available.
SetupFlipping/Reversing the Projected Image
SetupLight Setting
44
45
Press the 
INSTALL
button.
The screen will flip over horizontally or vertically with each
press of the button.
NOTE
This function is used to
set up reversed image
projection for ceiling
installation. To install
projector, refer to page
14.
One Touch
1
MENU3, 4Select2, 4…/†5EXIT
1
MENU2, 3,...

Correcting Vertical KeystoneUsed to compensate image shape when image distortion occurs.
Test PatternsGenerated by the projector itself. Utilized as installation basis for better installation of the projector.
SetupCorrecting V-Keystone
SetupTest Patterns
4647
Press the 
V.KEYSTONE
button.
Press the 
œor √button to adjust picture image optimally. 
One Touch
1
MENU2, 3Select2, 3
…/†/œ/√4EXIT
1
MENU2, 3, 4Select2, 3, 4…/†5EXIT
NOTE
V-Keystone corrects
distortion of picture
image by software. 
It is better...

Restoring the Factory Default SettingsUsed to restore setting values to factory defaults.
InformationYou can check external source signals, picture setup, PC picture adjustment and lamp use time. 
SetupRestoring the Factory Default Settings
SetupInformation
4849
Press the 
INFO
button.
1
MENU2, 3, 4Select2, 3, 4…/†/œ/√5EXIT
1
MENU2, 3Select2, 3…/†4EXIT
One Touch
NOTE
User settings includingEdit Name
and 
Custom
Picture
will be reset. 
Press the 
MENU
button.
The main menu is displayed.
1
Press the 
▲or...

VISUAL REALISM
Menu Option
Setting the Language
..................................52
Setting the Menu Position
..........................53
Setting the Menu Translucency
..................54
Setting the Menu Display Time
..................55
Selecting the Quick Menu
..........................56 

53
52
Setting the Language You can select the language used for the menu screen.
Setting the Menu PositionYou can move Menu Position to up/down/left/right.
Menu OptionSetting the Language 
Menu OptionSetting the Menu Position
1
MENU3, 4Select2, 4…/†5EXIT
1
MENU2, 3Select2, 3, 4…/†/œ/√5EXIT
Press the 
MENU
button.
The main menu is displayed.
1
Press the 
▲or ▼button to move to 
Menu Option
.
The 
Menu Option
menu is displayed.
2
Press the  button.The 
Language
is selected.
3
Press the  button again.
Press...

55
54
Setting the Menu TranslucencyYou can set the translucency of menu.
Setting Up the Menu Display TimeYou can set the display time of the menu.
Menu OptionSetting the Menu Translucency
Menu OptionSetting Up the Menu Display Time
1
MENU2, 3, 4Select2, 3, 4…/†5EXIT
1
MENU2, 3, 4Select2, 3, 4…/†5EXIT
Press the 
MENU
button.
The main menu is displayed.
1
Press the 
▲or ▼button to move to 
Menu Option
.
The 
Menu Option
menu is displayed.
Press the button.
2
Press the 
▲or ▼button to move to 
Menu...

56
Selecting the Quick Menu
Menu OptionSelecting the Quick Menu
Press the 
QUICK
button.
The menu you used previously will appear.
VISUAL REALISM
One Touch
Connecting to PC
Before Connecting to PC
............................58
Setting up the PC Environment
..................59
Connecting to PC
........................................60
Automatic Picture Adjustment
..................62
Frequency Adjustment
................................63
Fine Tuning with the Phase Adjustment
....64
Zooming the Screen...

Connecting to PCSetting up the PC Environment
Before Connecting to PCCheck the following before connecting the projector to a PC.
Connecting to PCBefore Connecting to PC5859
1
Click the right mouse button on the Windows wallpaper
and click on Properties.Display Propertiestab will appear.
2
Click on Settingstab and set the Screen resolutionby
referring to Resolutiondescribed in the display mode
table supported by this projector. ■You do not have to change Color qualitysetup.
3
Press the Advancedbutton....