Samsung Projector Sp D400s User Manual

 
 
 
 
 
 
Action 1 When the cooling fan 
system is not in normal 
operating condition. If the symptom remains even af
ter disconnecting and then 
reconnecting the power cord and  turning the projector on again, 
contact your product provider or our  service center. 
Action 2  When the lamp cover 
protecting the lamp unit is 
not properly closed or the 
sensor system is not in 
normal operating 
condition. Check whether the screws at the bottom side of the projector ar
e 
fastened correctly. If they are...

 
 
 
 
2. SERVICE Input port  
  
3. VIDEO IN Input port  
  
4. S-VIDEO IN Input port  
  
5. Remote Control Signal Receiver  
  
7. PC OUT terminal 
  
8. PC IN Input port  
  
9. COMPONENT IN Input port  
  
10.POWER Input port 
 
 
 
  |  Product Features | Product Views | Remote Control | Product Specifications | 
 
 
 
 
 
 
 
1.ON ( ) Button
2.AUTO Button
3. MENU ( ) Button
4.Move (▲ ▼ ◀ ▶)/( ) Button
5.V.KEYSTONE(+/-)  
(VERTICAL KEYSTONE)Button
6. VIDEO Button
7. S-VIDEO Button
8. P.SIZE Button...

 Used to switch to VIDEO Mode. 
 
7. S-VIDEO   Used to switch to  S-VIDEO Mode.  
 
8. P.SIZE  Used to adjust the size of picture screen.  
 
9. COMP  Used to switch to COMPONENT Mode.  
 
10. OFF ( ) 
Used to turn off the projector.  
 
11. RETURN ( ) 
Returns to the previous menu.  
 
12. EXIT ( ) 
Used to make Menu Screen disappear.  
 
13. INFO STILL  INFO: Used to check source signals, picture setup, PC screen ad justment and lamp lifespan. 
STILL: Used to see still images.  
 
14. HDMI   Used to...

 
Diagonal screen size  40 ~250 inch 
Projection Range  1 ~10 m 
Power Power 
Consumption 
Less than 350W 
Voltage  110/220 Vac +/-10 %, 50/60 Hz +/-3 Hz 
Noise  Eco : 31dB, Bright : 33dB 
Dimensions  343.1 mm(W)x162.4 mm(H)x347.2 mm(D) 
13.5 inches(W) x 6.4 inches(D) x 13.7 inches(H)  
Weight  5.8 kg / 12,8 lb 
Key Features   Brightness   Max 4,000 ANSI lumen  
Contrast  3,000:1 
Keystone   Vertical 
User 
Environment   Temperature 
and Humidity  Operating 
Temperature 32 °F ~ 104 °F (0 °C ~ 40 °C),...

  
1440X900 70.64 N 75 P 136.75 Sep.
Component  1920X1080i
33.72 P 60 P 74.18 Sep.
28.125 P 50 P 74.25 Sep.
1280x720p 45 P 60 P 74.25 Sep.
37.5 P 50 P 74.25 Sep.
720x480p 31.5 P 60 P 27 Sep.
720x576p 31.25 P 50 P 27 Sep.
HDMI  640X350
31.47 P 70.1 N 25.18 Sep.
37.86 P 85.1 N 31.5 Sep.
640X400 37.86 N 85 P 31.5 Sep.
640X480 31.47 N 60 N 25.175 Sep.
37.5 N 75 N 31.5 Sep.
720X400 31.47 N 70 P 28.322 Sep.
800X600 37.88 P 60 P 40 Sep.
46.87 P 75 P 49.5 Sep.
1024X768 48.36 N 60 N 65 Sep.
60.02 P 75 P 78.75...

 
 
Mode△x x△
 Picture Position Modes  
  
The position function is not su pported in HDMI, Video and S-vid eo input.
Overscan : Off
Source Picture Size 
Input Type Mode Normal Zoom1 Zoom2 16:9
Component HD
1080i O O O O
720p O O O O
SD 576p O O O O
480p O O O O
576i O O O O
480i O O O O
PC HD
1080i O x x O
720p O x x O
SD 576p O x x O
480p O x x O
576i O x x O
480i O x x O
PC 16:9 
Mode Ox xO
4:3 
Mode Ox xO
   Overscan : On 
Source Picture Size 
Input Type Mode Normal Zoom1 Zoom2 16:9
Component HD...

 
 
 |  Basic Settings | Connecting the Power | Connecting to video equipment | 
 
 
 
 
 Installing the Projector
 
  Install the projector so that the beam from the projector is p erpendicular to the screen.  
  
Place the projector so that the l ens is at the center of the screen. 
  If the screen is not vertically installed, the picture on the  screen may not be a rectangle. 
Do not install the screen in bright surroundings. If the screen  is too bright, the picture on the screen will not be...

 
 
 
 
 
 
You can adjust the size of image within zoom range by manipulat
ing the 
Zoom Knob. 
Focus the picture on the screen using the Focus Ring.
  
If your product is installed at a  location out of the specified projection 
distance (refer to  Screen Size and Projection Distance ), the focus cannot 
be adjusted correctly.
 
  Leveling with Adjustable Feet  
 
 
 
  For level placing of the projecto r, adjust the Adjustable Feet of the projector.
  
You may adjust the level of the projector up to...

 
 
 
 
 
 
This projector is designed to show images optimally on a 80 ~ 1
20 inch sized screen.
 
 
 
A. Screen 
Z: Throw Distance
Y': Distance from Lens Center to Image Bottom 
  Setting up the PC Environment  - Check the following items before connecting your PC to your  projector.
 
1. Click the right mouse button on the Windows desktop  and click on [Properties].  
 tab will appear.
2. Click on [Settings] tab and se t the  by 
referring to  described in  the display mode table 
supported  by...

 
 
 
5. Click the [OK] button to close the window, and click the [OK] button of the  window to close the 
window. 
The computer may restart automatically.  
 
 
   
6. Shut down the PC and connect to the projector.
   
   
Process might vary depending on  your type of computer or Windows versions.  
(For example, [Properties] appears instead of [Properties (R)]  as shown in 1.)
This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor.
Projected images may...