Samsung Projector Sp D400s User Manual

							 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
Failure to follow the instructio ns marked with this symbol may  cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may  cause personal injury or damage to the 
product or property.  
 
 
 
|  Power Related  | Installation Related  | Cleaning and Use Related  | 
    
 
  
  [The images here are for refere nce only, and are not applicable in all cases (or countries).]
 
   Insert the power plug firmly so that it does not come loose. 
zWhen the connection is not firm, it may cause a fire.  
  Do not use loose power outlets  or damaged power cables. 
zThere is a danger of electric shock or fire.  
  
Under no circumstances touch the power plug with wet hands. 
zThere is a danger of electric shock.  
  Do not plug multiple devices into a single wall outlet.  
zThere is a danger of fire.  
  
Do not bend the power cord excessively or place heavy objects o n it. 
zThere is a danger of ele ctric shock or fire.  
 Before moving the product, make s ure the power is off and remove the power cord 
from the wall outlet. In addition, make sure all connection cab les are disconnected 
from other devices b efore moving it. 
zMoving the product without disconnecting the power cord may dam age the 
power cord and cause elec tric shock or fire.  
  
To disconnect the apparatus from the mains, the plug must be pu lled out from the 
mains socket, therefore the main s plug shall be readily operable.  
						

							zThere is a danger of electric shock or fire.  
 
  
Always unplug the unit by holding the power plug. Pulling the p ower cable may 
damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of ele ctric shock or fire.  
  
 
 
 |  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
 
  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAME S 
AWAY FROM THIS PRODUCT AT ALL TIMES.  
zThere is a danger of fire.  
  
When installing the product in a  cabinet or on a shelf, make sure the front end of 
the base does not protrude. 
zDropping the product may dam age it or cause injury.  
  
Keep the power cord away from heaters. 
zThe coating of the pow er cord may melt and cause electric shock  or fire.  
  
Do not install the product in locations exposed to oil, smoke,  moisture or water 
(rainwater), or in a vehicle. 
zThere is a danger of ele ctric shock or fire.  
  
Do not install the product in locations with poor ventilation s uch as a bookshelf, 
closet, etc.  
zAn increase in the internal te mperature may cause a fire.   
						

							  Do not install on an unstable location, or on a stand smaller t han the product. 
zMake sure to keep the product out of the reach of children.  
The product may fall and cause personal injury. 
  
In case of thunder/lightning, di sconnect the power cord from the wall outlet. 
zThere is a danger of ele ctric shock or fire.  
 
  
Make sure the product's vents are  not blocked by a table cloth or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on th e ground carefully. 
zDoing so may cause damage or injury.  
  
Do not drop the product while carrying it. 
zDoing so may cause damage or injury.  
  Keep the product out of children’s reach. 
zMake sure to keep the product out of the reach of children.  
The product may fa ll and cause personal injury. 
  
 
 
 
|  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
  
 Do not insert metal items, such as chopsticks, steel wire, giml ets, or inflammable 
objects such as matches or pape r into the product through the ventilating openings 
and the PC/Video and power terminals.  
zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the pro duct off, 
disconnect the power  cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.   
						

							  Do not use or keep the product near flammable sprays or other s uch substances. 
zThere is a danger of f ire or explosion.  
  
Do not place containers with water, vases, drinks, chemicals, s mall metal parts or 
heavy objects on the product. 
zIf water enters the product, it m ay cause electric shock, or fire and when 
heavy objects fall, it may cause injury.  
   Do not let children place objects such as toys or cookies on th e product. 
zIf a child tries to reach for any of these objects, the product  may fall and 
cause harm.  
  
Do not look directly at the ligh t of the lamp nor project the picture onto eyes. 
zThis is dangerous espe cially for children.  
  
When you remove batteries from the remote, be careful that they  are not swallowed 
by children. Keep batteries ou t of the reach of children. 
zIf swallowed, see a doctor immediately.  
 
  
If the product emits smoke, unus ual noise, or there is a burning smell,disconnect 
the power plug immediately, and contact a  Service Center. 
zThere is a danger of ele ctric shock or fire.  
  
If the power plug pin or jack is exposed to dust, water or alie n substances, clean it 
thoroughly. 
zThere is a danger of ele ctric shock or fire.  
  
When cleaning the product, disco nnect the power cord and wipe the product using 
a soft dry cloth.  
zDo not use any chemicals such as wax, benzene, alcohol, thinner s, 
insecticide, air freshener, lubricant or detergent.  
   When not using the product for an extended period of time, disc onnect the power 
plug. 
zOtherwise, this may cause heat emission from the accumulated di rt or 
degraded insulation, leading to electric shock or fire.  
  Do not install the product in places with heavy dust, chemical  substances, high or 
low temperatures, high humidity, or where it will be operated f or a long period 
continuously etc.   
						

							  If the product is dropped or the  casing is damaged, turn the product off and unplug 
the power cord.  
zThis may cause electric shock or fire. Contact a  Service Center.  
  
Make sure to place your remote control on a table or desk.  
zIf you step on the remote control, you may fall and hurt yourse lf or the 
product may be damaged.  
  
 
 
  
 
Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment) - Europe only 
(Applicable in the European Union  and other European countries with separate collection 
systems)   
 
This marking shown on the product or its literature, indicates  that it should not be disposed 
with other household waste at th e end of its working life. To prevent possible harm to the 
environment or damage to health  from uncontrolled waste disposal, please separate this 
from other types of waste and recycle it responsibly to promote  the sustainable reuse of 
material resources.  
 
Household users should contact ei ther the retailer where they purchased this product, or 
their local government office, fo r details of where and how they can take this item for 
environmentally safe recycling.  
 
Business users should contact the ir supplier and check the terms and conditions of the 
purchase contract. This product s hould not be mixed with other commercial wastes for 
disposal. 
Correct disposal of batteries in this product - alleen voor Europa 
(Applicable in the European Union  and other European countries with separate battery return 
systems.)   
This marking on the battery, manual or packaging indicates that  the batteries in this product 
should not be disposed of with other household waste at the end  of their working life. Where 
marked, the chemical symbols Hg, C d or Pb indicate that the battery contains mercury, 
cadmium or lead above  the reference levels in EC Directive 2006 /66. If batteries are not 
properly disposed of, these subst ances can cause harm to human health or the environment. 
 
 
To protect natural resources and to promote material reuse, ple ase separate batteries from 
other types of waste and recycle them through your local, free  battery return system.   
						

							 
 
 |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
 
 
 
 
 Optical engine with advanced DLP technology  
 
  - 1024 x 768 panel has been adapted.  
- 4 segment color wheel to i
mplement optimal colors.  
- 280 W Lamp designed to improve luminance   
 
 Vivid colors  
 
  - Quality picture tuning focused
 on improving color - this unit aims at realizing color coordinates that 
meet broadcasting standards on video production.   
 
 Minimized fan noise and light leakage  
 
  - The airflow and fan installation structure are optimized to  minimize fan noise and beam leakage.
  
 
 Various Input Ports  
 
  - Connections to peripheral devi
ces have been improved by adopt ing various input terminals such as 
an HDMI (HDCP supported) termina l, a Component terminal, and a PC OUT terminal. 
  
 
 User adjustments  
 
  - This unit allows adjustment of each input port. 
- The unit has a reference pattern that can be used for positio
ning and adjustment.
  
   
   
 
 
  |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
  Front/Upper Side 
  
						

							 
 
 
 
 
 
  
  
1. Indicators 
- STAND BY (Blue LED) 
- LAMP (Blue LED) 
- TEMP (Red LED) 
※ Refer to the  LED Indications. 
  
2. Focus Ring 
Used for Focus Adjustment. 
  
3. Remote Control Signal Receiver 
  
4. Lens 
  
5. Adjustable Feet 
You can adjust the screen  position by moving the 
adjustable feet up and down.    
  
6. Zoom Knob 
Used to enlarge or r
educe image size. 
  
7. POWER( ) Button  
Used to turn the projector on or off.  
  
8. SOURCE Button  
Used to select input signals from the external 
sources. 
  
9. MENU Button  
Use this button to enter or exit a menu or to 
move forward in a menu. 
  
10. Select and Move Button(  /  ) 
Use this button to move to or select an item 
within a menu.
The buttons on the top of the p rojector are touch buttons.  
Touch them lightly with your fingers to use them. 
The label is attached to t he bottom of the product. 
 Unpacking   
 
 
Quick Installation Guide  Warranty Card/ Registration Card 
(Not available in all locations)  User Manual CD  
 
  
						

							 
Power Cable Remote Control/ 1 Batteries 
(Not available in all locations)  Cleaning Cloth 
    Sold separately
   
  
D-Sub Cable       
  
   
 
 
 
 
 LED Indications   
 
●:Light is On    ◐:Light is Blinking    ○:Light is Off
STAND 
BY  LAMP  TEMP  Information 
●○ ○ If you press the POWER button on 
the remote control or projector, the screen 
appears within  30 seconds.
● ● ○ The projector is in normal operating condition. 
●◐ ○ This state appears when the projector is preparing an operation
 after the POWER button 
on the projector or the remote control has been pressed.
○◐ ○ The POWER button is pressed to t
urn off the projector, and the cooling system is in 
operation to cool off the inside  of the projector. (Lasts for about 1 minute and 30 
seconds)
◐○ ◐ Refer to Action 1 below if the c
ooling fan inside the projector is not in normal operation 
condition.
○◐ ◐ Refer to Action 2 below if the l
amp cover protecting the lamp u nit is not closed 
properly.
○○ ◐ Power is turned off automatically when temperature inside of th
e projector goes beyond 
the control limit. Refer to Action 3.
● ◐ ◐ A problem has occurred when operating the DDP IC in the prod uct. Refer to Action 4. 
◐ ◐ ◐ A problem has occurred with the operation of the lamp. Refer  to Action 5.
● ◐ ● The lifetime of the lamp has expired. Refer to Action 6.
◐ ◐ ○ The memory in the product is  not operating normally. Contact a service center .
◐ ◐ ● The power for the p roduct is not operating normally. Contact a service center .
◐● ◐ A problem has occurred when opera
ting the color wheel in the product. Refer to Action 
4.
  
  
  
  
  
    Clearing Indicator Problems   
 
Classification  State  Measures