Samsung Plasma TV PN8000GF User Manual

English - 31
 
 
Controlling the TV with your hands using motions 
■   
 Access Motion Control
 
−  Action: Spread your hand in the direction of the camera, and shake it three or four times from a 
side to side.
 
■  
 Pointing Navigation
 Moves the cursor to the position you want.
 
−  Action: Spread your hand and guide the cursor to position you want.
 
■   
 Run
 Selects an item or executes a command that is indicated by the cursor or\
 is highlighted.
 
−  Action: Clench your fi st.
 
✎ When you...

English - 32
Face recognition
\231 → Tools → Settings → Account Manager → Face recognition
Enable or disable the Face recognition function. Face recognition lets you register your face with your 
Samsung account. Also, you can log in to the Samsung account using the Face recognition function 
without inputting your account ID or your account password.
 
✎You can register your face in only one account.
To register your face in your Samsung account, follow these steps:
 
✎To use this function, you must log...

English - 33
To log in to your Samsung account using Face recognition, follow these steps:
 
✎If you use Face recognition  to log into Smart Hub, it may be less secure than logging in with a 
password.
1.  With the Smart Hub screen displayed, select a using your 
remote. The Samsung Account screen appears.
Log In
What is Samsung Account? A Samsung Account is an integrated 
membership account that lets you access all the services 
provided by Samsung through a single registered account.
Samsung Account...

English - 34
The Evolution Kit Slot (Kit Sold Separately)
This socket is designed to accept an extension device called the Evoluti\
on Kit. The Evolution Kit enables 
the TV to run a variety of the latest applications for a better user exp\
erience.
The Evolution Kit, which may not be available depending on the product, will be sold separately in 2013 or 
later.
[PE8000-ZA]BN68-04034A-00Eng.indb   342012-04-05   �� 1:22:30 

English - 35
Connecting to a Network
You can set up your TV so that it can access SMART TV applications through your local area network 
(LAN) using a wired or wireless connection.
 
✎After you have “physically” connected your TV to your network, you must configure the network 
connection to complete the process. You can configure the connection during the Initial Setup 
process (see page 17 ) or after the Initial Setup process, through the TV’s menu (see page 37 ).
Network Connection - Wireless
You can...

English - 36
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending o\
n your network 
setup. They are illustrated starting below:
The Modem Port on the WallTV Rear Panel
LAN Cable (Not Supplied)
Modem Cable (Not Supplied) External Modem 
(ADSL / VDSL / Cable TV)
The Modem Port on the Wall External Modem 
(ADSL / VDSL / Cable TV) IP Router that has a 
DHCP Server TV Rear Panel
Modem Cable  
(Not Supplied) LAN Cable  
(Not Supplied) LAN Cable  
(Not...

English - 37
Configuring Network Connections
After you have run the initial setup, you can configure or reconfigure the network connections through the 
TV's menu.
Configuring a Wireless Network Connection 
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to 
configure network connections automatically. Most wireless networks use DHCP. If you have a Static IP 
network, see the e-Manual for configuration instructions.
To configure the network connection...

English - 38
Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network 
connections. Home networks that support DHCP automatically provide the IP address, subnet mask, 
gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. 
If you have a Static IP network, see your user’s manual for configuration instructions.
To configure the network connection for a wired network that uses DHCP,...

English - 39
The Smart Touch Control
Improved user convenience has been provided so that you can switch the channel and adjust the volume 
with just your fingertips while focusing on the TV screen. In addition, the built-in Touch Pad removes the 
need for a mouse when you change the menu settings and search for something on the Internet.
 
✎For more detailed information about Smart Touch Control, see "Using the Smart Touch Control" in 
e-Manual.
Smart Touch Control
TVSTBBD
RETURNVOICENUMBER
.*$...

English - 40
Installing batteries (Battery size : AA)
112
1. Press the back of the remote at the very bottom with both thumbs, and then slide the battery co\
ver up 
in the direction of the arrow.
2.  Install two batteries so that the polarity of the batteries (+/-) matc\
hes the illustration in the battery 
compartment.
3.  Slide the cover down in the direction of the arrow to close the battery cover.
Initial Pairing for Smart Touch Control
After you have run the Initial Setup on your TV, you should...