Samsung Plasma TV E550 User Manual

mode.
 NWhen you change the Backlight  
for LED TV 
 /  Cell Light  for PDP TV , 
Contrast , or Brightness, the TV sets 
Motion Lighting to Off .
Picture Options
Menu  → Picture 
→ Picture Options
Using this function, you can configure 
additional picture settings to suit your 
preference.
 NWhen your TV is connected to a PC  

via an HDMI to DVI cable, you can 
only make changes to Color Tone.
 ●Color Tone
Cool makes the picture bluer (cooler). 
Warm1 and  Warm2 make the picture 
redder (warmer).
 NWarm1 and  Warm2 are deactivated 
when the Picture Mode is set to 
Dynamic.
 NYou can adjust and store settings for 
each external device connected to an  

input on the TV. Select the Source 
and then adjust the settings.
 ●Digital Noise Filter
If the broadcast signal received by your 
TV is weak, you can activate the Digital 
Noise Filter feature to reduce any static 
and ghosting that may appear on the 
screen.
Auto Visualization: When changing 
analog channels, displays signal 
strength. 

 NWhen the signal is weak, try all the 
options until the TV displays the best 
picture.
 NOnly available for analog channels.
 NWhen the bar is green, you are 
receiving the best possible signal.
 ●MPEG Noise Filter
Reduces MPEG noise to provide 
improved picture quality.
 ●HDMI Black Level
Lets you adjust the screen depth by  

selecting a black level.
 NAvailable only in HDMI mode.
 ●Film Mode
Sets the TV so that it senses and then 
processes film signals from all sources 
automatically and adjusts the picture 
for optimum quality.
 for PDP TV  The Cinema Smooth function 
is only active when the TV inputs an 
HDMI 24Hz signal.
 NAvailable in TV, AV, Component (480i  

/ 1080i) and HDMI (1080i).
 ●Auto Motion Plus 
 for LED 6100 Series and above 
Removes blur and judder from scenes 
with larger amounts of rapid movement 
to provide a clearer picture.
Blur Reduction: Adjusts the blur 
reduction level for signals input from 
all video sources.
Judder Reduction: Adjusts the Judder 
reduction level for signals input from  

a video source through which you are 
playing a movie.
Reset: Reset the custom settings to the 
factory defaults.
 NThe info screen on your TV displays 
the resolution and frequency of 
the incoming video signal (60 Hz). 
This displayed frequency is not the 
frequency of the picture the TV is 
displaying when you have Auto 
Motion Plus on. 

 NIf noise occurs on the screen, please 
set Auto Motion Plus to Off. If Auto 
Motion Plus is set to Custom, you 
can control Blur Reduction and 
Judder Reduction manually and use 
Reset  to reset both to their default 
settings.
 NIf Auto Motion Plus is set to Demo, 
you can compare the difference 
between a picture with Auto Motion 
Plus On and  Auto Motion Plus Off . 

 ●LED Motion Plus  for LED TV 
Removes blur and judder from scenes 
with large amounts of rapid movement 
to provide a clearer picture.
Reset Picture
Menu  → Picture 
→ Reset Picture
Resets your current picture mode to its 
default settings. 

Using the TV with Your PCUsing Your TV as a Computer (PC) 
Display
Entering the Video Settings (Based on 
Windows 7)
For your TV to work properly as a 
computer display, you must enter the 
correct video settings after you have 
connected the TV to your PC.
 NDepending on your version of 
Windows and your video card, the