Samsung Plasma TV E550 User Manual

connection.
3.  
When the connection has been 
verified, the " You are connected 
to the Internet. If you have any 
problems using online services, 
please contact your Internet Service 
Provider."  message appears. Select 
OK.
 
NIf the connection process fails, check 
the LAN port connection.
 
NIf the automatic process cannot find  

the network connection values or 
if you want to set the connection 
manually, go to the next section, 
"Manual Network Setup."
Manual Wired Network Setup You can configure your TV's wired 
network connection manually when 
connecting your TV to a network that 
requires a Static IP address.
Getting the Network Connection Values
To view the Network connection values  

on most Windows computers, follow 
these steps:1.  
Right click the Network icon on the 
bottom right of the screen.
2.  
In the pop-up menu that appears, 
click Status.
3.  
On the dialog that appears, click the 
Support tab.
4.  
On the Support Tab, click the Details 
button. The Network connection 
values are displayed. 

To set up your TV's wired network 
connection manually, follow these 
steps:1.  
Go to the Network Settings screen. 
(Network  
→  Network Settings)
2.  
Select  Start. The network connection 
screen appears and the verification 
process starts.
3.  
Select  Stop. The verification process 
stops. Select IP Settings on the 
network connection screen. The IP  

Settings screen appears.
4.  
Select  the  IP Mode, and then set the 
IP Mode  to Manual.
5.  
Go to the IP Address entry field, and 
then select the IP Address using the 
remote.
6.  
Enter the first portion of the IP 
Address (for example, 105) into the 
first entry field using your remote. 
When done, go to the next field.
7.  
Enter the next portion of the IP  

Address. When done, go to the next 
field.
8.  
Repeat the entry process for each 
field in the IP Address.
 
NIf you make a mistake when 
entering a number, re-enter the 
number to correct it.
9.  
When done, go to the Subnet Mask 
fields.
10.  
Repeat the same entry process for 
Subnet Mask, Gateway , and DNS  

Server.
11.  
When done, select OK. The network 
test screen appears and the 
verification process starts. When the 
connection has been verified, the 
"You are connected to the Internet. If 
you have any problems using online 
services, please contact your Internet 
Service Provider. " message appears. 
Select OK.
Network Status 

Menu → Network
 
→  Network Status
You can check the current network and 
Internet status.
If the wired network connection failed...
 
●No network cable found.
Check if your network cable is plugged 
in. If it is connected, make sure that 
the router is turned on. If it is on, try 
turning if off and on again.
 
●IP auto setting failed.
Try the following to set your IP address  

automatically or set your IP address 
manually by selecting IP Settings.
1.) Ensure that DHCP server is enabled 
on the router. 2) Unplug and re-plug-
in the router. 3) Contact your Internet 
Service Provider for more information.
 
●Unable to connect to the network.
Try the following: check if your IP 
address is set correctly in  IP Settings. 
Contact your Internet Service Provider 
for more information. 

 
●Connected to your local network, but 
cannot connect to the Internet.
Check the DNS settings in IP Settings 
or contact your Internet Service 
Provider to access the Internet.
 
●Network setup complete, but cannot 
connect to the Internet.
Contact your Internet Service Provider 
to access the Internet.